Questions & Answers
Questions: I have put on an aftermarket fuel pump and bypassed the original. Is there a cap I can purchase to cover the hole in the engine block if I remove the original fuel pump? Or should I just have one milled.
Question By: Rob Houser on Jul 6 2016 1:51 PM
You will have to make one of those locally if you are using a remote fuel pump.
Answer By: Willys Jeep Parts Tech on Jul 7 2016 5:42 AM
Questions: I need to replace the fuel filter on my 46 cj2a, but all I can find is tin in-line filter. I have the glass bowl filter and can't seem to find it anywhere... am I good to use the in-line? Are those original parts? I'd like to keep it as original as possible.
Question By: Adam on Jan 1 1970 12:00 AM
That is an aftermarket fuel filter on your vehicle currently. They never originally had one.
Answer By: Willys Tech on Apr 21 2015 12:00 AM
Questions: On a 1969 cj5 replacement fuel filter marked in on one side and out on the other, is the in where gas flows in from the tank and out side connected to carburetor side?
Question By: Barbara on Jul 18 2014 12:00 AM
Yes, out is to the fuel pump. In is from the tank.
Answer By: Willys Tech on Jul 21 2014 12:00 AM
Questions: Which way is the in on the filter supposed to go
Question By: Anonymous on Jul 17 2014 12:00 AM
I dont think it really matters on that. The housing would be arrowed if it did.
Answer By: Willys Tech on Jul 17 2014 12:00 AM
Questions: I think there used to be a bracket to hold the fuel filter along the engine block right next to the fuel pump. Would you have that bracket?
Question By: James on Jan 1 1970 12:00 AM
This is an aftermarket filter kit. Willys never mounted these along the engine block.
Answer By: Willys Tech on Jan 30 2014 12:00 AM
Questions: where is the fuel filter located on a 1954 CJ-3B jeep
Question By: Tom on Jun 16 2013 12:00 AM
They were not originally used. We typically recommend using this inline one between the tank and fuel pump.
Answer By: Willys Tech on Jun 17 2013 12:00 AM