Questions & Answers
Questions: How long is the rod off the pedal? I have a 47 cj2a but it has an F134 in it. I ordered the original pedal for it and it’s about 12 inches short to the bell crank on the side of the engine. I’m thinking this is the pedal I should’ve bought.
Question By: Ben Tull on Mar 10 2021 4:24 AM
11 ½ from bottom of ball to tip of threads
Answer By: Willys Jeep Parts Tech on Mar 10 2021 6:39 AM
Questions: I bought the 17733.02 foot pedal..What is the metal v-bracket for?
Question By: Garry on Dec 26 2020 1:57 AM
Lower treadle spring to make sure the pedal fully retracts to resting position.
Answer By: WIllys Jeep Parts Tech on Dec 28 2020 6:11 AM
Questions: 1956 willys My accelerator pedal and linkage separated (ball from socket). Is there a simple fix or do I need to replace it?
Question By: John Sikes on Dec 24 2020 10:49 PM
Yes, it will have everything shown in the photos.
Answer By: WIllys Jeep Parts Tech on Dec 28 2020 6:09 AM
Questions: What is the correct accelerator pedal assembly for a 1968 CJ5, with 6-225? Nothing is quite matching up.
Question By: Craig Miller on Jan 22 2020 3:12 PM
That exact pedal is only available used. Please email firstname.lastname@example.org Thanks!
Answer By: Willys Jeep Parts Tech on Jan 22 2020 9:36 AM
Questions: do you have all the parts from the pedal to the carburetor? for c j 6 with 134 engine
Question By: moshe gissis on Jan 14 2020 3:07 PM
A1177 is an additional part we do carry. We also have the pedal return spring as well. We can help with used as well.
Answer By: Willys Jeep Parts Tech on Jan 14 2020 11:33 AM
Questions: I have a 134-4F engine with weber carburator. Is this the accelerator pedal I should buy?
Question By: Dimitris on May 25 2018 6:07 AM
Yes, this is the correct accelerator pedal to use. Thanks
Answer By: Willys Jeep Parts Tech on May 25 2018 3:59 AM
Questions: I have a 65 CJ5. My accelerator rod rubs on the right hand side of the tub and causes the accelerator to get stuck. Would a new one solve this? Or should I try to get some additional clearance to avoid it?
Question By: Mike on Sep 19 2017 2:17 PM
This should solve the problem if your hinge and 1st linkage is worn and has play.
Answer By: Willys Jeep Parts Tech on Sep 19 2017 9:45 AM
Questions: Will this fit the M715 Kaiser?
Question By: Rob Fetty on Jul 19 2017 7:37 PM
Sorry, I have not fitted this to a M715. I'm sure it would work with modification.
Answer By: Willys Jeep Parts Tech on Jul 19 2017 1:42 PM
Questions: Will this spring fit a 1967 Kaiser Jeep CJ-5 with the F-134 engine
Question By: Bob McKeag on Jan 1 1970 12:00 AM
Yes that is listed above. It will be correct for your vehicle.
Answer By: Willys Tech on May 19 2014 12:00 AM
Questions: Will this pedal fit a 1967 CJ-5 with the 134 engine.
Question By: Anonymous on Jan 1 1970 12:00 AM
Yes as long as you have the 4-134 head engine you are all set.
Answer By: Willys Tech on Jan 2 2013 12:00 AM
Questions: Did the 6-225 engine CJ-5s use this style pedal?
Question By: Anonymous on Nov 21 2011 12:00 AM
It is different. Please call us toll free. We are more than happy to help out.
Answer By: Willys Tech on Nov 22 2011 12:00 AM
Questions: Do you have the linkage from the end of the first linkage rod to the carburetor. If not where do I get that or do I have to fabricate it?? Any suggestions on how to make this connection would be appreciated. For a 1956 CJ-5.
Question By: Anonymous on Oct 18 2011 12:00 AM
We can probably get you good used. Please call us toll free.
Answer By: Willys Tech on Oct 19 2011 12:00 AM
Questions: Does this come with the control rod?
Question By: Nate on Sep 14 2011 12:00 AM
This is the accelerator pedal and first linkage rod.
Answer By: Willys Tech on Sep 15 2011 12:00 AM