Product Videos
Questions & Answers
Sort By:
Questions: Do you sell a complete body tub kit for a '42 mb that would have the proper floor to accommodate a T90 transmission?
Question By: Frank on Nov 21 2018 6:44 PM
On that you'll just have to enlarge the hole a bit to accommodate the T90 higher shift tower. The boot should cover it.
Answer By: Willys Jeep Parts Tech on Nov 21 2018 10:46 AM
Questions: Will this body tub fit on a CJ-3B frame and are there minor or major modifications? Will the engine fit under the hood?
Question By: Mark Stewart on Mar 2 2018 4:19 PM
The biggest problem will be the carburetor clearance for the 4-134 F head motor and the taller T90 top sifter which will have to be drilled out too.
Answer By: Willys Jeep Parts Tech on Mar 2 2018 10:30 AM
Questions: i am looking fro 1945 jeep willys body with fenders and hood. i would like to know the steel gauge of your body tubes.
thank you
Question By: mario on Sep 7 2017 8:13 PM
18 gauge steel used on body tubs in the front and rear flooring, all mounting brackets, top cowl assembly, and wheel housings. 16 gauge steel used on body tubs for all side and tail panels.
Answer By: Willys Jeep Parts Tech on Sep 11 2017 10:54 AM
Questions: I am rebuilding a 1946 cj-2a and would like to use a 41-45 MB tub. Is there a shorter body carb that will fit the hurricane engine.
Question By: Edgar C Hall on Jan 30 2017 1:29 AM
If you have a 4-134 F engine not the original L head engine used in the MB or 2A then I have seen please remove the top sleeve on the 923806 for clearance.
Answer By: Willys Jeep Parts Tech on Jan 30 2017 5:47 AM
Questions: Can I put the tub on a cj5 or new jeeps of make a Willys mb
Question By: George on Jul 24 2016 5:49 PM
A CJ-5 and Willys MB have different dimensions. Im sure anything is possible though but they do have different wheel base.
Answer By: Willys Jeep parts tech on Jul 25 2016 5:58 AM
Questions: I want to recreate a WWII MB. Since I have not been able to locate a time period frame or reproduction, I was going to us CJ2 frame. Will this fit with the 42-45 MB Tub kit?
Question By: John on Feb 7 2015 12:00 AM
Yes but you will have to accommodate the T90 transmission's taller tower.
Answer By: Willys Tech on Feb 9 2015 12:00 AM
Questions: Hi, I need the front part of the floor. Do you have that part only? Thank s.
Question By: Anonymous on Dec 18 2014 12:00 AM
Sure we have complete front floor pans available or repair panels ect. Check out our website or call us toll free. We are happy to help out.
Answer By: Willys Tech on Dec 19 2014 12:00 AM
Questions: where are you locaded and does the grill come with it and would you ship toNew brunswick canada and what is the cost
Question By: Anonymous on Aug 5 2014 12:00 AM
We are in SC. The grille is a separate item. part number: A3615
Answer By: Willys Tech on Jan 1 1970 12:00 AM
Questions: Does this include the side cowls?
Question By: Alex on May 3 2014 12:00 AM
This is a complete body tub as shown. Yes it will have the cowl panels.
Answer By: Willys Tech on May 5 2014 12:00 AM
Questions: hi . how can I make my 1946 jeep willy cj2 power steering. thank you Enrique.
Question By: enrique on Aug 28 2013 12:00 AM
Try our part number: CJPOWERSTEER4CYL
Answer By: Willys Tech on Aug 29 2013 12:00 AM
Questions: hi I like to no if this item can be ship to my home in Puerto rico and what will it cost be side the cost of the tub kit . is a1946 jeep willy cj2
Question By: enrique on Aug 28 2013 12:00 AM
We can ship this to any address in the 48 states for free. We would need to ship this to a freight forwarder for you.
Answer By: Willys Tech on Aug 29 2013 12:00 AM
Questions: do these kits have numbers and paperwork so you can register the body
Question By: Anonymous on May 10 2013 12:00 AM
You just use your old vin tags or we sell new ones and you will be all set.
Answer By: Willys Tech on May 13 2013 12:00 AM
Questions: will this kit fit a 1946 cj-2a dose it have rear fender well tool boxes toolbox marked jeep under pasenger seat tool box behind hood and windsheald
Question By: Anonymous on Jan 7 2013 12:00 AM
Willys MB were never marked 'jeep'. It will fit the CJ-2A with some modification.
Answer By: Willys Tech on Jan 8 2013 12:00 AM
Questions: i have a 1942 willys jeep and it won't stay running it will start the oil pressure will run around 25psi to 40psi then it will drop to 0 and die
Question By: dakota on Dec 22 2012 12:00 AM
I would check your oil pump, fuel pump, timing, ect...It could be alot of things. Please call us toll free. We can help out.
Answer By: Willys Tech on Dec 26 2012 12:00 AM
Questions: can u export body tub for kaizer jeep & ford jeep INDIA & how much it cost
Question By: jitendra sharma on Dec 21 2011 12:00 AM
We can only ship body tubs to the 48 states. We can ship to a US based freight forwarder for you for free though.
Answer By: Willys Tech on Dec 21 2011 12:00 AM
Questions: Is the free shipping for the 48 states only?
Question By: Hadi Budiyono on Dec 12 2011 12:00 AM
Yes anywhere in the 48 states its free shipping.
Answer By: Willys Tech on Dec 13 2011 12:00 AM
Questions: does the body come with all handles and roof brackets as shown in picture 42-45mb
Question By: ken corbett on Jun 19 2011 12:00 AM
It comes less the handles and top bow assembly.
Answer By: Willys Tech on Jun 20 2011 12:00 AM
You Might Also Be Interested In
Weekly Willys highlights and discounts sent to your inbox
