Product Videos
Questions & Answers
Sort By:
Questions: The clutch/brake linkage cross bar for my cj3b has a large threaded nut on the longer side - like an end cap with a smaller hole in center of cap. Maybe held a grease fitting?
Question By: Tom howard on Jan 23 2021 1:33 PM
Not original. Email mike@kaiserwillys.com some pictures so we can see.
Answer By: Willys Jeep Parts Tech on Jan 25 2021 5:44 AM
Questions: I have two brackets on my shaft. Approx 6 inches apart. One connects to the clutch. The other one connects to clutch pedal arm and has return spring on it. Both are welded to the shaft but I can see cotter pins.
Question By: Dan on Jan 23 2015 12:00 AM
Sounds like you are talking about your clutch bellcrank.
Answer By: Willys Tech on Jan 23 2015 12:00 AM
Questions: I've got a 59 CJ5. The clutch pedal and the brake pedal go down through the floor. They both pivot on a shaft at frame. Is there a bushing or sleeve to repair , bad grooves from LACK of LUBE. pilot error I'm sure. It looks to be permanently in place?? Any help would be a good thing. Thanks Dennis
Question By: Dennis on Oct 29 2014 12:00 AM
There never originally was a bushing or sleeve. This cross shaft will help. We also sell new pedal arms and the tube and bracket that this slides thru too. We can get you fixed up all new.
Answer By: Willys Tech on Oct 30 2014 12:00 AM
Questions: Do you have the Key for this and the cluctch arm?
Question By: Anonymous on Oct 12 2014 12:00 AM
5036A is the part number for the woodruff key
Answer By: Willys Tech on Oct 13 2014 12:00 AM
Questions: Having trouble getting the brake pedal off, removed the plate from the master cylindar, pedal will not slide off. Any tricks or anything I'm missing?
Question By: Ian on Oct 11 2014 12:00 AM
Once you slide off the cross shaft the pedal should come off.
Answer By: Willys Tech on Oct 13 2014 12:00 AM
Questions: I have a Cj2a 1946 Jeep Willys. When I hit the break there is a lot of play from left to right what do I need to fix that?
Question By: Jeremy baud on Aug 25 2013 12:00 AM
This cross shaft as well as a new brake pedal arm will do the trick.
Answer By: Willys Tech on Aug 26 2013 12:00 AM
Questions: Will this fit a 1971 V6 CJ5, or is it a different part?
Question By: Bill on May 11 2013 12:00 AM
The V6-225 engine used a different one. We can only get those good used.
Answer By: Willys Tech on May 13 2013 12:00 AM
Actually, I took a gamble and purchased this one for my 225 V6 and it's a direct replacement.
Answer By: Brian on Dec 7 2016 10:14 PM
Questions: Will this part work for the Pickup or is there another part for it?
Question By: Anonymous on Jan 5 2013 12:00 AM
For the Willys Truck it is different. The correct part number is 642924. Thanks
Answer By: Willys Tech on Jan 7 2013 12:00 AM
Questions: Does this piece have the keyway cut for clutch arm mount.
Question By: Anonymous on Jun 24 2012 12:00 AM
Yes that is correct. It has the cut out.
Answer By: Willys Tech on Jun 25 2012 12:00 AM
Questions: When replacing this cross shaft are there extra parts I should ordering to replace with it? (Washers, pins, ect...) My 48 cj2a serial #218265
Question By: Kurt on Mar 17 2011 12:00 AM
Some extra items are: 645086, A405, 800527
Answer By: Willys Tech on Mar 17 2011 12:00 AM
Questions: I have two brackets on my shaft. Approx 6 inches apart. One connects to the clutch. The other one connects to clutch pedal arm and has return spring on it. Both are welded to the shaft but I can see cotter pins.
Question By: dan on Jan 23 2015 12:00 AM
Sounds like you are talking about your clutch bellcrank.
Answer By: Willys Tech on Jan 23 2015 12:00 AM
Questions: I've got a 59 CJ5. The clutch pedal and the brake pedal go down through the floor. They both pivot on a shaft at frame. Is there a bushing or sleeve to repair , bad grooves from LACK of LUBE. pilot error I'm sure. It looks to be permanently in place?? Any help would be a good thing. Thanks Dennis
Question By: Dennis on Oct 29 2014 12:00 AM
There never originally was a bushing or sleeve. This cross shaft will help. We also sell new pedal arms and the tube and bracket that this slides thru too. We can get you fixed up all new.
Answer By: Willys Tech on Oct 30 2014 12:00 AM
Questions: Do you have the Key for this and the cluctch arm?
Question By: Anonymous on Oct 12 2014 12:00 AM
5036A is the part number for the woodruff key
Answer By: Willys Tech on Oct 13 2014 12:00 AM
Questions: Having trouble getting the brake pedal off, removed the plate from the master cylindar, pedal will not slide off. Any tricks or anything I'm missing?
Question By: Ian on Oct 11 2014 12:00 AM
Once you slide off the cross shaft the pedal should come off.
Answer By: Willys Tech on Oct 13 2014 12:00 AM
Questions: I have a Cj2a 1946 Jeep Willys. When I hit the break there is a lot of play from left to right what do I need to fix that?
Question By: Jeremy baud on Aug 25 2013 12:00 AM
This cross shaft as well as a new brake pedal arm will do the trick.
Answer By: Willys Tech on Aug 26 2013 12:00 AM
Questions: Will this fit a 1971 V6 CJ5, or is it a different part?
Question By: Bill on May 11 2013 12:00 AM
The V6-225 engine used a different one. We can only get those good used.
Answer By: Willys Tech on May 13 2013 12:00 AM
Questions: Will this part work for the Pickup or is there another part for it?
Question By: Anonymous on Jan 5 2013 12:00 AM
For the Willys Truck it is different. That is availble good used. Please call us toll free.
Answer By: Willys Tech on Jan 7 2013 12:00 AM
Questions: does this piece have the keyway cut for clutch arm mount
Question By: Anonymous on Jun 24 2012 12:00 AM
Yes that is correct. It has the cut out.
Answer By: Willys Tech on Jun 25 2012 12:00 AM
Weekly Willys highlights and discounts sent to your inbox
