Questions & Answers
Questions: will this be ok in the rear dana 27 in my 1942 ford gpw
Question By: Neil Laing on Oct 22 2019 2:30 AM
Yes, I do believe this will work in the rear as well for your Willys MB.
Answer By: Willys Jeep Parts Tech on Oct 22 2019 5:27 AM
Questions: I have a 42 GPW,with the 27 in the rear, will this work ? Seems they all say these are for front axles only.
Question By: Stephen G Gardner on Apr 24 2019 5:53 PM
I do believe this will work because the same ring and pinion is used. I will try to confirm.
Answer By: Willys Jeep Parts Tech on Apr 24 2019 11:00 AM
Questions: After installing, do you need to add any type of additive when putting rear end grease back in?
Question By: keith welch II on Sep 15 2018 11:04 PM
I dont believe so but if you email email@example.com I can send you over a complete set of instructions.
Answer By: Willys Jeep Parts Tech on Sep 17 2018 11:22 AM
Questions: You show that the LR2118 will work in a Dana 25 or 27. When I research the same item the LR2115 if for a Dana 27 and LR2110 is for a Dana 25. I have bought many items from you and never had a problem. I have a Dana 25 front axle.
Question By: keith welch II on Sep 15 2018 10:51 PM
Sorry, LR2118 isnt a good part number for us. Email firstname.lastname@example.org and I can try to help.
Answer By: Willys Jeep Parts Tech on Sep 17 2018 11:55 AM
Questions: Can this locker be installed with the carrier still in the housing with 5.38 ratio?
Question By: Sam crenshaw on Sep 28 2017 4:43 AM
Please email email@example.com and i can email you over a full set of instructions. Thanks! This does not require any special tools and installs in existing case assemblies.
Answer By: Willys Jeep Parts Tech on Sep 28 2017 6:17 AM
Questions: I am looking hard at a 48 cj2a 25/41 with lockers front and rear. Not sure brand. I have had a detroit locker on the rear of a CJ7 which was exciting to say the least on icy pavement. Wondering how a front locker behaves on dry pavement and would it be suicide in the winter? Does anybody make a selectable front and I guess rear for the 25/41 combo?
Question By: Bill Mitchell on Jul 20 2017 3:25 AM
If you could please call us toll free and ask for Mike M. I can try to assist you further.
Answer By: Willys Jeep Parts Tech on Jul 20 2017 10:06 AM
Questions: I am rebuilding a 1947 CJ2A and was wondering if these are safe to use on the front and rear axles on the highway?
Question By: Nathan on Sep 8 2014 12:00 AM
Yes, pretty much all willys only go about 45 miles per hour anyways.
Answer By: Willys Tech on Sep 9 2014 12:00 AM
Questions: Is this a full lock of the axle at all times or does it act like a limited slip while steering on pavement?
Question By: Dave on Feb 26 2014 12:00 AM
When operating off-road, the LOCK-RIGHT will always send the engine power to the wheels that need it most. For example, if you are rock crawling and one wheel is in the air (complete loss of traction), the wheel on the ground will receive the engine power and keep you going.
Answer By: Willys Tech on Feb 27 2014 12:00 AM
Questions: Do these lock and unlock manually? another word, once installed specially on the froth axle, would I still be able to drive the car on FWY?
Question By: Vahe on Oct 8 2013 12:00 AM
No these are an internal item by your ring & pinion. Sounds like your looking for part number: 400501
Answer By: Willys Tech on Oct 8 2013 12:00 AM
Questions: If I install the new lock-right performance in the front and rear axlr of my 1952 m38 will this give me positive traction.
Question By: jim on Aug 27 2011 12:00 AM
Yes that is correct.
Answer By: Willys Tech on Aug 29 2011 12:00 AM
Questions: do you know if the lock right no slip lockers will fit in a cj2a with a dana 25 front and dana 41 rear ?
Question By: scott on May 12 2011 12:00 AM
Yes we have these for both available.
Answer By: Willys Tech on May 13 2011 12:00 AM