Questions & Answers
Questions: Can this be used on aluminum? I'm interested in using in on an aluminum boat.
Question By: Jay on Apr 10 2019 6:37 PM
I would think as long as you properly prime the metal it would, but have not personally used it directly on aluminum.
Answer By: Willys Jeep Parts Tech on Apr 11 2019 5:33 AM
Questions: Does this require a top coat or clear coat?
Question By: Nick on Sep 3 2018 9:14 PM
No, they didnt originally use but you can if you wanted to.
Answer By: Willys Jeep Parts Tech on Sep 4 2018 1:22 PM
Questions: Do you carry Harvest tan for a 1946 cj2a? Thanks.
Question By: Gavin Brady on Aug 14 2018 6:28 PM
That paint you have to mix there locally.
Answer By: Willys Jeep Parts Tech on Aug 14 2018 12:18 PM
Questions: Can this paint be cleared ?
Question By: Carlos R on Jan 28 2017 10:39 PM
Not sure what you are asking. Please call us toll free or email email@example.com and we can try to help.
Answer By: Willys Jeep Parts Tech on Jan 30 2017 5:42 AM
Questions: Do you sell a compatible primer for this paint?
Question By: Brian Beauvais on Oct 27 2016 6:52 PM
That is a local paint shop item. A good automotive primer is what we use.
Answer By: Willys Jeep Parts Tech on Oct 27 2016 12:26 PM
Questions: Does this paint require hardner?
Question By: Daryl on May 11 2015 12:00 AM
It does not require a hardener. It was never used originally.
Answer By: Willys Tech on May 11 2015 12:00 AM
Questions: Can it export to Japan?
Question By: nomocyan on Apr 14 2014 12:00 AM
Sorry this can only be shipped in the 48 States ground.
Answer By: Willys Tech on Apr 15 2014 12:00 AM
Questions: How much paint would you need to paint a cj3a in gallons?
Question By: Phil on Mar 20 2014 12:00 AM
http://www.kaiserwillys.com/category/willys-jeep-paint-parts-kits - Please see link to our paint sections. We give a number of options in kits depending on the scope of what your painting.
Answer By: Willys Tech on Mar 20 2014 12:00 AM
I just finished a CJ2a - painting just the body, inside and out, to include one coat in the wheel wells, and engine compartment (including one coat on the under side of the hood), but not the chassis, windshield frame, or the dash. Prepped with a dk. green (almost OD) primer to help coverage and to help hide any paint missed on backside of brackets, etc. The windshield, wheels, and dash had been previously finished with the matching spray can OD paint offered here. I thinned for spraying, 3 parts paint to 1 part slow reducer (I'm in dry Arizona), and did 2 full (but not real wet, as I have a habit of running paint) coats in a 75 degree garage - and I consumed just about a half gallon of this paint. I would estimate that even adding the dash and windshield, and shooting wetter than I do, a single gallon would easily spray an entire CJ3a body.
Answer By: John Ciofalo on Nov 11 2017 2:51 PM