Product Videos
Questions & Answers
Sort By:
Questions: in the first picture the welded brace closest to the pivots is welded closer to the top of seat frame. In the second picture the welded brace closest to the pivots not tubular and positioned on the bottom. which is the correct way?
Question By: don cross on Aug 28 2017 3:21 AM
For the CJ-2A, they are welded to the top of the tube. The CJ-3A and CJ-3B had them on the bottom of the tube.
Answer By: Willys Jeep Parts Tech on Aug 29 2017 5:41 AM
Questions: Have 1946 CJ2A, but no passenger side seat frame or the passenger side under-seat tool box to which to attach the front of the seat frame. Does Kaiser-Willys offer this tool box and the hardware to mount it and connect it to the seat frame?
Also, am interested in bottom seat cushions for the two front seats (in tan canvas).
Thanks.
Question By: Tim on Aug 29 2016 8:12 PM
A3227K-2A is the part number for the tool bin. We have the seat frames, mounting pivots, cushions and all too. Please call us toll free and we can work it up for you. Thanks!
Answer By: Willys Jeep Parts Tech on Aug 30 2016 5:56 AM
Questions: Found what I believe are the original seat frames for my 1948 CJ2A Serial Number J180978 but tubular frames appear to be of a 2-piece design not one continuous frame. The top section of the seat backs are missing. Anyone make just that portion of seat frame or do I just get a new driver and passenger frame?
Question By: Robert Hickernell on Jul 13 2016 4:49 PM
We do sell the upper back part number: 765404 but originally they were a one piece design.
Answer By: Willys Jeep Parts Tech on Jul 13 2016 10:17 AM
Questions: I'm tearing down my '47 CJ2A. Today I took the cushions off (redneck boat cushions) and there was a strange metal pan that looks somewhat stock under the bottom passenger cushion. Do these seats need pans, or do the cushions with plywood go right in? Thanks.
Question By: Anonymous on Apr 13 2015 12:00 AM
They originally used a wooden plywood bottom. We make the seat covers and cushion with the plywood pan or without. If you get it without then you have to make your own.
Answer By: Willys Tech on Apr 14 2015 12:00 AM
Questions: What prevents the passenger seat to pivot forward during an emergency stop, or a front-end collision? During a sudden stop, I imagine the seat will rotate around the pivot brackets ( the ones to have access to the tool box,) taking the passenger along and smashing his/her face against the front windshield. Do you sell some type of locking mechanism for the passenger seat?
Question By: Ed Vigil on Jun 23 2014 12:00 AM
I would install seat belts. Nothing did originally. Try part numbers: BELT-1 or BELT-2
Answer By: Willys Tech on Jun 24 2014 12:00 AM
Questions: I see the passenger seat pivots forward for access to the tool box and rear seat ?? do you sell the pivot hardware? thanks, Paul
Question By: paul on Aug 18 2013 12:00 AM
You want part number: 689130 for the pivots.
Answer By: Willys Tech on Aug 19 2013 12:00 AM
Questions: is there 12 pre drilled holes for the seat cover??
Question By: steve on Apr 29 2012 12:00 AM
These need to be drilled.
Answer By: Willys Tech on Apr 30 2012 12:00 AM
You Might Also Be Interested In
Weekly Willys highlights and discounts sent to your inbox
