Questions & Answers
Questions: Are the connections made from under the dash? If so do you have a video showing this or am I on my own to figure it out? I'm thinking some how the tension cables come into play but don't know how I do that. Thank you.
Question By: Jack on Nov 15 2018 8:12 PM
https://www.kaiserwillys.com/diagram/truck-diagrams/electrical-diagrams-willys-truck/windshield-wiper-46-64-truck/windshield-wiper Here is a link to a diagram.
Answer By: Willys Jeep Parts Tech on Nov 20 2018 1:55 PM
Questions: What amperage fuse do I use? I blew a 15 Amp. Thanks!
Question By: Jack on Feb 21 2018 2:39 PM
We usually use a 20-25.
Answer By: Willys Jeep Parts Tech on Feb 21 2018 11:28 AM
Questions: I have a 1963 willy CJ-5 that presently only has a single blade, hand operated driver side wiper. I want to update it with a modern two wiper system, even adding a washer function. Do you have kits that will still allow my windshield to fold forward on the hood, and complete the before mentioned?? Please help.
Question By: Dan on Jan 18 2018 5:54 PM
12V part number is probably the best bet for wiper motor. But nothing is made that would have a windshield washer function.
Answer By: Willys Jeep Parts Tech on Jan 18 2018 12:46 PM
Questions: I have a wagon I am redoing. It has this motor but not the switch for the dash. Do you sell just the switch? Thanks
Question By: Mark on Mar 18 2017 5:57 PM
I can provide special order. Please call me toll free and I can help you out.
Answer By: Willys Jeep Parts Tech on Mar 20 2017 6:02 AM
Questions: Would this work on my 1957 FC-150? Regards
Question By: Federico Rossignoli on Aug 3 2016 7:25 PM
We have rebuilt ones available. Please call us toll free.
Answer By: Willys Jeep Parts Tech on Aug 4 2016 6:29 AM
Questions: What are my options for a 59 FC-170? Is there any type of unit that will work for me?
Question By: Andrew Jahnes on Jul 23 2016 9:17 AM
We have rebuilt ones available. Please call us toll free.
Answer By: Willys Jeep parts tech on Jul 25 2016 5:53 AM
Questions: MONTOYA, Hello, Where is this unit made? I've heard that there are some of the imported units that have problems after a little while. Does this unit have a warranty?
Question By: TIMOTEO on Jan 2 2015 12:00 AM
These are USA made. There were some foreign ones but we don't carry them.
Answer By: Willys Tech on Jan 5 2015 12:00 AM
Questions: I have a 46 4WD pickup. The wiper switch for the original motor is in the center high on the dash and is a cable control. Will this new switch mount in the same hole as the original switch and/or are modifications to the hole required?
Question By: Paul Pryibil on Dec 31 2014 12:00 AM
I suppose you could mount it there or in the dash itself.
Answer By: Willys Tech on Jan 2 2015 12:00 AM
Questions: What is the difference's if any between the 2 switches pictured above??
Question By: Jim on Oct 24 2014 12:00 AM
There is no difference.
Answer By: Willys Tech on Oct 27 2014 12:00 AM
Questions: Is it possible to purchase the drive piece on the end of the motor that fits into the existing driven section of the cable system. I am putting my truck back together, and that part has come off the motor, and disappeared.
Question By: Ray on Oct 14 2014 12:00 AM
I believe your referring to the wiper transmission. That is available good used only. Call us toll free. We can point you in the right direction.
Answer By: Willys Tech on Oct 14 2014 12:00 AM
Questions: This states that the upgrade is the two speed motor. I want the two speed motor for my 50 Jeepster 12 volt. Please tell me what to order ?
Question By: Anonymous on Sep 15 2014 12:00 AM
This is the correct wiper motor kit for you.
Answer By: Willys Tech on Sep 15 2014 12:00 AM
Questions: I have a 1950 Truck and one of the wiper cables came off do you have instructions that will explain how to reconnect them? My email address is firstname.lastname@example.org thanks.
Question By: Anonymous on Jan 1 1970 12:00 AM
The cable should just clip back into the wiper motor transmission on the backside of the motor.
Answer By: Willys Tech on Apr 7 2014 12:00 AM
Questions: Does the shaft from the motor pass through a hole on the aluminum mounting bracket?
Question By: Bill on Aug 13 2013 12:00 AM
Yes it does.
Answer By: Willys Tech on Aug 13 2013 12:00 AM
Questions: Does the new motor bolt right on or do you have to drill new mounting holes? Is there any drilling involved?
Question By: Anonymous on Jul 3 2013 12:00 AM
You will need to drill mounting holes. This straight forward though.
Answer By: Willys Tech on Jul 8 2013 12:00 AM
Questions: Will this replace the vacuum unit on my 1949 Jeepster?
Question By: bill on Jun 10 2013 12:00 AM
Yes that is correct. It is for the Willys Truck, Station Wagon and Jeepster.
Answer By: Willys Tech on Jun 10 2013 12:00 AM
Questions: I just received my electric motor wiper conversion for my 59 willys truck. No wireing came with the deal. Do you have a video showing the conversion being installed ?
Question By: Jan Vanderwal on May 22 2013 12:00 AM
I do have the link above showing where the wiring goes. We are working on a video now but it may be alittle bit before its posted. If you have questions feel free to call us toll free.
Answer By: Willys Tech on May 22 2013 12:00 AM
Questions: Will this work on a 1960 jeep pickup in place of vacuam wipers and bolt on original mounts ? Thank You
Question By: Anonymous on Mar 3 2013 12:00 AM
Yes that is correct. It is a replacement for the original trico wiper.
Answer By: Willys Tech on Mar 4 2013 12:00 AM
Questions: DOES THIS MOTOR GO BACK AN FORTH ON JUST GO AROUND
Question By: KEITH NOVAK on Dec 26 2012 12:00 AM
Your old cables hook onto the motor so it functions just like original.
Answer By: Willys Tech on Dec 27 2012 12:00 AM
Questions: I have an 1948 Willys Overland 1 ton. I want to replace the vacuum #666779 with a #957958 electric. Will it adapt withouth a hassle?
Question By: Gib on Nov 7 2012 12:00 AM
Yes, as long as your are running 12 volts.
Answer By: Willys Tech on Nov 7 2012 12:00 AM
Questions: I have a 52 pickup that is still 6 volt, do you have a conversion kit fo it?
Question By: Scott Robinson on Sep 17 2012 12:00 AM
We have factory rebuild trico wiper motors.
Answer By: Willys Tech on Sep 18 2012 12:00 AM
Questions: What do you do about your vacum lines and if you just plug them at the fuel pump will that hurt the fuel pump
Question By: Si on Dec 31 2011 12:00 AM
Yes you should just plug them.
Answer By: Willys Tech on Jan 2 2012 12:00 AM