Questions & Answers
Questions: just to clarify, the old floor panel should be cut out first, then this replacement welded back in place correct? how close to the side rim should the old be cut then?
Question By: Rob Graham on Feb 17 2018 12:58 AM
Yes, that is correct. Leave yourself plenty of room for welding. Once you cut away, you cant add back in. It goes all the way to the side panels and riser.
Answer By: Willys Jeep Parts Tech on Feb 19 2018 5:47 AM
Questions: I'm not sure I understand your answer regarding the holes for the clutch, brake and throttle. Do I need to drill these holes? If so, do you have a recommendation on how to locate these points on the floor board. My old floor board is so bad I can't use it as a template.
Question By: Daryl on May 28 2013 12:00 AM
Yes you have to drill your toe board holes. You can use the pedal arms as a template or you can call us toll free and we can get you measurements if you need them.
Answer By: Willys Tech on May 29 2013 12:00 AM
Questions: Is there wood in the bracing or is it filled in where the wood supports go through?
Question By: Anonymous on Nov 12 2012 12:00 AM
Yes, these are just like original with the wood inserts
Answer By: Willys Tech on Nov 13 2012 12:00 AM
Questions: The illustration shows the transmission floor cover panel as part of this and the description is new complete one piece etc. Is the cover included or separate? Please clarify. Thank you
Question By: Jim on Sep 6 2012 12:00 AM
It is included with it just like pictured.
Answer By: Willys Tech on Sep 6 2012 12:00 AM
Questions: What is the gauge of the metal used for your floor pans ?
Question By: Mike on Nov 10 2011 12:00 AM
18 gauge steel just like original.
Answer By: Willys Tech on Nov 10 2011 12:00 AM
Questions: Does this include the bracing/brackets that tie the floor into the frame siderails at the front? I don't see those brackets available as separate parts on your site and mine are totally rusted out.
Question By: Kevin on May 16 2011 12:00 AM
Yes it includes all the toe board supports as well.
Answer By: Willys Tech on May 17 2011 12:00 AM
Questions: are holes cut for brake and so on
Question By: dave on Mar 8 2011 12:00 AM
You have to drill your toe board holes.
Answer By: Willys Tech on Mar 8 2011 12:00 AM
Questions: Is this panel intended to sit 'on top' of the old one -- or is it best to saw out the old one and weld this in?
Question By: Anonymous on Jan 5 2011 12:00 AM
You are going to want to welt this in. It is complete with all the welded bracing and everything.
Answer By: Willys Tech on Jan 6 2011 12:00 AM