Product Videos
Questions & Answers
Sort By:
Questions: Do i need this bushing for my M38A1 spring
Question By: CARL ROGERS on Oct 16 2019 4:46 PM
If you are a non-grease able pivot eye bolt then this would be correct for you.
Answer By: Willys Jeep Parts Tech on Oct 16 2019 9:58 AM
Questions: What are is the OD and ID of these bushes?
Question By: Tom Bean on Dec 5 2018 8:18 AM
Overall Length: 1-3/4"
ID: 1/2"
OD: 7/8"
Answer By: Willys Jeep Parts Tech on Dec 5 2018 5:41 AM
Questions: I have a '60 CJ5 with closed shackles, which I'm replacing with new, heavier closed shackles. While I'm working on it, I want to replace all the leaf spring and shackles bushings. Are these used on both ends of the leaf springs as well as the shackle-to-frame bracket? I'll need 12 of them for the whole job if so.
Question By: DB on Mar 16 2014 12:00 AM
Yes 12 will do both the pivot eye and shackle ends of the whole vehicle.
Answer By: Willys Tech on Mar 17 2014 12:00 AM
Questions: have a 1967 cj5 and i thought that there is one of each leaf spring bushings on each end of the spring but here it says only 4 for the whole vehicle instead of 8
Question By: David on May 14 2012 12:00 AM
Yes this is the same bushing for the shackle as well. It can be used on both.
Answer By: Willys Tech on May 14 2012 12:00 AM
Questions: I have a cj2a with shackles that look like 916646. I need new steel-rubber bushings. I believe that 921055 is the correct bushing, however 921055A also looks like it. Whats the difference, will either work?
Question By: Anonymous on May 6 2012 12:00 AM
They originally used bronze bushings on a CJ-2A. If this is the sytle you have Im sure it will work.
Answer By: Willys Tech on May 7 2012 12:00 AM
Questions: Looking for 1967 (Kaiser) Jeepster Commando parts - in this case the leaf spring pivot eye bushings. Will these fit? I do not see the Jeepsters (C-101) listed anywhere.
Question By: Anonymous on Jan 1 1970 12:00 AM
We do have alot for this. Please call us toll free. We can probably help out.
Answer By: Willys Tech on Feb 27 2012 12:00 AM
Questions: How are these installed / removed?
Question By: Derek on Jun 27 2011 12:00 AM
Just press them in with a vise.
Answer By: Willys Tech on Jun 27 2011 12:00 AM
You Might Also Be Interested In
Weekly Willys highlights and discounts sent to your inbox
