Questions & Answers
Questions: I have a 65 CJ5 with a D27 front axle. The hub seal is stamped Victor 46002. Is this the correct seal?
Question By: Steve W Tennant on Jul 14 2021 1:31 AM
I dont go by that victor number but yes it should. be. You can tell by your wheel bearings being stamped 'LM' on them.
Answer By: Willys Jeep Parts Tech on Jul 14 2021 5:49 AM
Questions: I need a seal but im not sure of the front axle- looks to be an original for the 63 willys truck that its in but Im finding later model jeep brake parts so Im not sure - could you give me the od and id dimensions so I can see if I can match it up? thanks
Question By: bill goodson on Mar 6 2018 9:37 PM
The best way is to get your wheel bearing numbers. If you can call us toll free. I can take some measurements for you and if you have your wheel bearing numbers i can confirm.
Answer By: Willys Jeep Parts Tech on Mar 7 2018 6:17 AM
Questions: I have a 62 Willys PU. Which way does this oil seal face on axle hub, metal lip in or out? Mechanic says there was not any seal at all. Also, is it possible I have a Dana 25 in this year PU?
Question By: Richard P Howe on Nov 4 2016 7:07 AM
The metal face should be flush with the hub.
Answer By: Willys Jeep Parts Tech on Nov 7 2016 5:33 AM
Questions: I am changing the bearings and seals from my 1967 jeep cj5 four wheel drive. The old inner grease seal has trostle t6626 s stamped on it, what replaces it? the roller bearing cone has Timken 18590 stamped on it what replaces it, if anything? Will look forward to your answer!
Question By: chester on Mar 20 2015 12:00 AM
If you have that stamping then these are not for you. You want 52942 & 52943 bearings. The seal is part number: 805150.
Answer By: Willys Tech on Mar 23 2015 12:00 AM
Questions: Is this the seal that will prevent oil or grease from getting on your brake shoes or running down the inside of your wheels?
Question By: Bob on Jan 1 1970 12:00 AM
Yes that is correct.
Answer By: Willys Tech on Jun 5 2014 12:00 AM
Questions: I have a 64 truck, is this located between the hub and the drum?
Question By: Haakon on Nov 6 2012 12:00 AM
Yes that is correct.
Answer By: Willys Tech on Nov 6 2012 12:00 AM
Questions: Will item #938151 work with 1970 cj5 stock front axle?
Question By: Anonymous on Aug 13 2011 12:00 AM
Yes as long as you are Dana 27 which you should be.
Answer By: Willys Tech on Aug 15 2011 12:00 AM