Questions & Answers
Questions: Does this sending unit come with the 6 screws? Also will this work in my 1949 jeepster with original fuel tank? Thanks
Question By: James K Bowler on Jul 28 2019 12:38 PM
B0306 is the part number for the screws.
Answer By: Willys Jeep Parts Tech on Jul 29 2019 5:52 AM
Questions: Hello, will this sending unit work with the fuel gauge of my 69 Kaiser Wagoneer? Thanks
Question By: Tim on May 14 2019 8:07 PM
Sorry, they used a different one.
Answer By: Willys Jeep Parts Tech on May 15 2019 6:13 AM
Questions: I need to match an aftermarket fuel gage to this sender. They have all kinds of ohm ratings. Would the standard Ford 73-10 ohms work with this one? or do I need something else?
Question By: Larry Grant on Jan 14 2018 11:31 PM
These are the readings for the gauges: 7-9 Full and 130-140 Empty. Thanks
Answer By: Willys Jeep Parts Tech on Jan 15 2018 7:24 AM
Questions: How do you adjust the reading on the fuel gauge?
Question By: Louis David on Jul 31 2016 4:45 PM
There is a small window on the back of your fuel gauge to adjust with a screw driver.
Answer By: Willys Jeep Parts Tech on Aug 1 2016 6:20 AM
Questions: I have a 1958 willys fc170 , I am looking for a replacement speedometer cluster with temp and fuel sending units. Do you carry these parts? Thanks
Question By: Doug on Apr 7 2015 12:00 AM
914850 would be the one you need.
Answer By: Willys Tech on Apr 8 2015 12:00 AM
Questions: Does this sending unit work with your tank # MTS0018 ? If not tell me what is the part number for the sending unit that goes with this tank ?
Question By: Anonymous on Jan 19 2014 12:00 AM
Yes this is the correct sending unit for that tank.
Answer By: Willys Tech on Jan 21 2014 12:00 AM
Questions: I pulled the tank out of my 1950 Jeepster. It has a smooth flange and no holes for the sending unit. On the sending unit is a steel ring with the 6 screws in it, that was loose. Does this ring tighten to the tank flange when the sending unit is installed?
Question By: Tom Evans on Apr 11 2012 12:00 AM
Yes that should be your fuel tank sending unit. It is attached with 6 screws.
Answer By: Willys Tech on Apr 11 2012 12:00 AM
Questions: What are the ohm resistance values for this unit? I am having my guages converted from 6 to 12 volt and need the ohm values to have it correctly calibrated.
Question By: Dale on Feb 5 2011 12:00 AM
8-10 Full and 70-80 Empty
Answer By: Admin on Feb 7 2011 12:00 AM