Questions & Answers
Questions: My temperature gauge is 6 volts. Will I have to replace the sending unit or just supply 12 volts to the new gauges?
Question By: Jeff on Jun 9 2021 9:12 AM
The sending unit works off resistance so you will only need to replace the gauge. Thanks
Answer By: Willys Jeep Parts Tech on Jun 11 2021 9:01 AM
Questions: it looks like it will fit a 1974 CJ5, will it?
Question By: Tom on Jun 4 2020 12:34 AM
Yes, this goes in side the 914845 gauge used thru 1975.
Answer By: Willys Jeep Parts Tech on Jun 4 2020 5:45 AM
Questions: I have a 1950 Willys Jeepster which I have converted to a 12 volt. Do I have to convert back to 6 volt for the instruments on the dashboard?
Question By: Robert Mitchell on Mar 4 2017 11:38 PM
If you have your original gauges then you will need to make sure they are only supplied with 6 volt.
Answer By: Willys Jeep Parts Tech on Mar 6 2017 5:50 AM
Questions: Looking for little advise, going to be third set of gauges in this 58 jeep truck, last set hooked them all up and it smoked wire from ing. switch to fuel meter, both gauges got it, little over twelve volts going thru the whole system, checked all wireing from fuel gauge to sending unit no bare wires. all others replaced new temp sending unit and wires all replaced, new wire from switch to fuel gauge, just at a loss thanks in advance. one thing the ing coil hooked to hot wire of fuel gauge.
Question By: ROBERT on Jul 14 2014 12:00 AM
Sounds like it arched. You had metal on metal. Make sure the connection is not hitting the housing. It will smoke the wire everytime.
Answer By: Willys Tech on Jul 15 2014 12:00 AM
Questions: Will they fit 54/55 station wagon with round inst cluster running on 12 volts ?
Question By: Ron on Aug 23 2013 12:00 AM
These are for the style speedometer with the fuel and temp built in.
Answer By: Willys Tech on Aug 26 2013 12:00 AM
Questions: I have a 1958 FC-170 With the round speedometer. Will these gauges replace and fit into my speedometer?
Question By: Anonymous on Nov 2 2012 12:00 AM
Yes this should work for just fine.
Answer By: Willys Tech on Nov 4 2012 12:00 AM
Questions: Do you carry 12v replacement gauges that fit in the squarefactory openings?
Question By: nick on Sep 15 2012 12:00 AM
Those have to be rebuilt. Please call us toll free. I can give you a few options for rebuilders.
Answer By: Willys Tech on Sep 17 2012 12:00 AM
Questions: I have a 1948 willys truck with rectangle holes in the cover plate and a square speedometer. Do these gauges work for this application? both the temp and oil are electrical
Question By: bill on Nov 28 2011 12:00 AM
Yes these sit back behind it. They are period correct.
Answer By: Willys Tech on Nov 28 2011 12:00 AM
Questions: What range are the fuel gauge 240 ohms empty- 33 full or 73 empty- 10 full?
Question By: Marc on Jan 1 1970 12:00 AM
8-10 Full and 70-80 Empty
Answer By: Admin on Aug 2 2011 12:00 AM