Questions & Answers
Questions: will this duel res master cylinder be sufficient with disc front and drum back brakes?
Question By: Lorne Hood on Mar 30 2020 11:09 PM
This drum is intended for the original drum / drum brake set up. We do have options available. Please email firstname.lastname@example.org your vehicle information and we can help.
Answer By: Willys Jeep Parts Tech on Mar 31 2020 5:41 AM
Questions: I bought this MC and need to change the rear fitting to the original banjo fitting for brake line clearance. Do you have the crush washers ? Thanks
Question By: Dan Butcher on Jan 14 2018 1:46 PM
Sorry, i dont have a good listing for those. Napa should be able to get you the crush washers you need if you give them the ID and OD you want.
Answer By: Willys Jeep Parts Tech on Jan 15 2018 10:06 AM
Questions: I need the gasket for the cap for this master cylinder. Is it available? Thanks
Question By: Dave on Oct 22 2016 10:50 PM
For that master cylinder you will have to make it. We do have the early style master cylinders cap gaskets for 1941-66 Willys Jeep.
Answer By: Willys Jeep Parts Tech on Oct 24 2016 5:51 AM
Questions: I have a 65 cj 5 and i replace the the drums from my 66 cj 5 that has a bigger drums i think a 9 inch. What master brake cylinder should i go with.. dual or single.
Question By: Dall on Oct 27 2014 12:00 AM
To bolt up and match up properly you will need to check what you have on the vehicle currently. If you are 10 brakes then you are probably this one above.
Answer By: Willys Tech on Oct 27 2014 12:00 AM
Questions: I am looking for a master cylinder for my 69 Kaiser DJ6. This one looks very much like it. The casting on mine indicates it was made by Warner Lockheed with a raised casting YJ31 and an indented casting of FF-50314. Are these the same?
Question By: Tommy on May 20 2014 12:00 AM
This should be the correct one with your 10x2 brakes dual reservoir.
Answer By: Willys Tech on May 21 2014 12:00 AM
Questions: I have a 1969 CJ5 with the 225V6. Is this the correct unit? Also does everything in the picture come with unit, including the plunder rod?
Question By: Shaun on May 2 2013 12:00 AM
The plunger rod is available used only. This is the complete master cylinder as shown.
Answer By: Willys Tech on May 6 2013 12:00 AM
Questions: I have a 51 Willys Overland with the original single reservoir brake master cylinder. What is the part# and where would i purchase a rebuilt or new if still being manufactured.
Question By: Jim W on Nov 26 2012 12:00 AM
That is part number: 805223
Answer By: Willys Tech on Nov 27 2012 12:00 AM
Questions: I have this master cyl on my jeep, the dust boot is shot, do you sell the exact same boot as pictured on part # 94556 ?
Question By: Greg on Jul 5 2012 12:00 AM
I dont have the boots just by themselves.
Answer By: Willys Tech on Jul 9 2012 12:00 AM
Questions: I too have a 67 CJ5 with a frame mounted master cylinder that bolts up through the cylinder body unthreaded like part # 805223 will the part # 945556 work on my CJ5.
Question By: D Parlapiano on May 27 2012 12:00 AM
Im sure its possible with modification.
Answer By: Willys Tech on May 29 2012 12:00 AM
Questions: have a 67 cj5..the front was converted to disk brake ..will the dual cyclinder work on mine..it has a frame mounted cyclinder(single) on it now.
Question By: mike on Dec 19 2011 12:00 AM
I would use part number: 376896
Answer By: Willys Tech on Dec 19 2011 12:00 AM
Questions: I have a narrow frame early cj5 1967, brake master bolts through below reservoir to frame 10'' drums, will this fit mine? Picture looks different. would love to have dual cylinder.
Question By: Dave Hardy on Nov 14 2011 12:00 AM
This should be the proper one for you.
Answer By: Willys Tech on Nov 14 2011 12:00 AM