Product Videos
Questions & Answers
I have a 1948 International KB2. 214 Green Diamond, 6 cylinder engine. I need a clutch disk. 10" dia. 10 spline, 1.25" shaft diameter. Is this clutch disk for shaft size 1 1/8" or 1 1/4" ?
Willys Jeep Parts Tech:
1-1/8" like original to the 6-226
1-1/8" like original to the 6-226
Seeing 2 replies about shaft size one saying 1 an 1/8, and one saying 1.25 for this item need 10 inch 10 spline 1.25 shaft od
Willys Jeep Parts Tech:
We'll check measurement. Email mike@kaiserwillys.com your vehicle info too and we can help. Thanks!
We'll check measurement. Email mike@kaiserwillys.com your vehicle info too and we can help. Thanks!
I have a t-93 with 1 1/8 inch output shaft 10 spline with a 10 inch clutch need the replacement part number. for clutch disc and or clutch pressure plate kit (hooked up to a ford 302) in 1959 willys truck. Thanks Jeff
Willys Jeep Parts Tech:
Assuming they are still using a Willys clutch on your set up the part number would be: 930602K
Assuming they are still using a Willys clutch on your set up the part number would be: 930602K
Is this for a 1 & 1/16" or 1 & 1/8" 10-spline transmission shaft?
Willys Jeep Parts Tech:
1-1/8" like original.
1-1/8" like original.
Will this 10 in disc fit on a ford 302 engine? The gearbox are cj2a 1947 Are the measure 1 1/16 in - 10 spline 10 in Disc ?
Jim Miller:
Most ford V-8 engines in the 60's used a 10" disc with a 1 1/16" 10 spline.
Most ford V-8 engines in the 60's used a 10" disc with a 1 1/16" 10 spline.
Willys Jeep Parts Tech:
This will not work with a Ford 302 unless the original flywheel from the 4-134 engine is mounted to it which is doubtful.
This will not work with a Ford 302 unless the original flywheel from the 4-134 engine is mounted to it which is doubtful.
Is there a specific side that faces the flywheel, or can this disc face either direction?
Willys Jeep Parts Tech:
It will only go one way due to the center hub that protrudes on one side away from the flywheel.
It will only go one way due to the center hub that protrudes on one side away from the flywheel.
Is this friction 1.25 shaft?
Willys Tech:
Yes it is the direct replacement for the original friction disct used in the 54-64 Willys Truck and Station Wagon with the 6-226.
Yes it is the direct replacement for the original friction disct used in the 54-64 Willys Truck and Station Wagon with the 6-226.
YOU MIGHT ALSO BE INTERESTED IN
