Save 10% Off Transmission & Transfer Case. Enter FEBTCT10

FREE SHIPPING – orders $98+ See Details

Select Your Currency
Close
  • Africa
  • Americas
  • Asia
  • Europe
  • Oceania
Shop Kaiser Willys

Hood Welt Kit with rivets (top of grille)
Fits 41-71 MB, GPW, CJ-2A, 3A, 3B, 5, M38, M38A1

Part # 663520

New Hood Welt Kit (1 required per vehicle)

Complete kit with proper 3/4" webbing and 15 rivets. Runs along top of grille to form seal between hood & grille. Welting measures 55" in length.

Fits:
41-45 MB
41-45 GPW
46-49 CJ-2A
49-53 CJ-3A
53-64 CJ-3B
55-71 CJ-5
50-52 M38
52-66 M38A1

Part # Price
663520

$17.74

MSRP:

$17.74

MSRP:

Call for Details

Questions & Answers

Please Wait...

Ask Question Add Answer

All questions will be displayed after moderation. All answers will be displayed after moderation.

Will this fit a 1972 cj5

Willys Jeep Parts Tech:
Yes, this should work for you as well thru 1975

What tool is used for the rivets?

Willys Jeep Parts Tech:
RT900

Are replacement rivets available.

Willys Jeep Parts Tech:
We can. Email us and we can help out or call us toll free.

I have a 74 Cj-5. It looks to have tan welting and some type of clips. will this work for it?

Willys Jeep Parts Tech:
I would think you could get to work yes.

My original welt was not black. Can I get this in natural white canvas color?

Willys Jeep Parts Tech:
This is a dark tan material like originally used.

Since it is 63", does the hood welt run along top of grille and end where the grille meets the fender or does it continue in between the grille and the fender past the head lights?

Willys Jeep Parts Tech:
it will run all the way across the top surface of the grille. Approx 63" across. It was only used on the top of the grille where your pre-drilled holes are from the factory.

I cant find this for a 73 cj5 anywhere. would this work?

Willys Jeep Parts Tech:
Yes, this would fit that application as long as the seal you need is about 63" long. Thanks

Will this work for my '48 willys truck? Thanks

Willys Jeep Parts Tech:
669210 is what i would go with for the Willys Truck.

Do you have a special tool for fixing the rivets Mike?

Willys Jeep Parts Tech:
We just use a need nose flat head screw driver to bend tabs over.

Rivets seem short do they bend over the edge underneath or do they some how bend within the hole. I've got original grill and the rivets don't poke thru to other side. Any help would be helpful. Thanks

Willys Tech:
They are the correct length. They must be pressed down hard then the fork bent over to either side.

I have 72 cj5 the welt looks the same don't have rivets it has clips.do you sell just the welt? all my clips look good

Willys Tech:
We can get you just welting. Please call us toll free.

Ok..feel silly but, just got the welting strip for my 46 CJ-2A? How do I make the small rivets work? Very little room under there. Special tool?

Willys Tech:
RT900 is the part number you need.

I have a 1965 Willys CJ5 and need the seal that goes over the grille and sits between the grill and the hood. What part number? Is it 663520?

Willys Tech:
Yes this is the proper part number for you.

what material is this welting made of?

Willys Tech:
It is a coated canvas material like original.

I have a Ford GPW, 1942, I need the rubber weather strip that goes along the side and top of the radiator. I have the side pieces, but the top one is missing. It is about a one inch wide strip of bubber attacint to the frame to close the gap between the radiater and the grill frame. It attaches with screws or rivits?

Willys Tech:
2A1732 is the part number you need. People usually go back with screws because it is easier.

I have a 1970 CJ-5. Will this kit work?

Willys Tech:
Yes this will be the proper one for you. They used it thru 1971.

hood welt for a 1970 jeepster commando?

Willys Tech:
This will work for that vehicle as well.

I have a 67 cj5 What hood welt kit do I need?

Willys Tech:
This is the proper one. It goes thru 1971.

Would this welt kit fit a 1970 CJ5-225-V6?

Willys Tech:
Yes this will be correct.
Request Catalog
X
THANK YOU! Your catalog request has been submitted successfully. Please note:

If your catalog does not arrive within 7-10 business days, call us Toll-Free at (888) 648-4923.

Email Subscription
X
THANK YOU! You have successfully subscribed to our newsletter.
Contact Form
X
THANK YOU! Your contact form request has been submitted successfully.
Photo Contest
X
SUCCESS! Your photo contest entry has been submitted!
Browser warning
The browser you are using to visit our website is no longer supported. For the best browsing experience, please visit us using a different browser.
I understand, close this message