NOS Transfer Case Four Wheel Drive Shift Lever (Short)
Fits 41-71 Jeep & Willys with D18 transfer case
NOS Transfer Case Four Wheel Drive Shift Lever
This is a new old stock piece that measures at 14-1/2".
This shorter outer lever that was typically used on Willys from '41 up until the mid 50s but can be interchanged to all models.
Application:
D18 transfer case
Fits:
41-45 MB
41-45 GPW
46-49 CJ-2A
49-53 CJ-3A
53-64 CJ-3B
55-71 CJ-5
50-52 M38
52-66 M38A1
46-64 Truck
46-64 Station Wagon
Note:
These are NOS and will have some surface rust on them from shelf wear.
Part # | Price |
---|---|
A1602 | $59.99 MSRP: |
$59.99
MSRP:
Product Videos
Questions & Answers
YOU MIGHT ALSO BE INTERESTED IN
![NOS Rear Output Bearing Shim Pack Fits 41-71 Jeep & Willys with Dana 18 transfer case](https://www.kaiserwillys.com/app/uploads/2020/03/7371591_b__89887.1653395439.1280.1280-370x370.jpg)
NOS Rear Output Bearing Shim Pack
Fits 41-71 Jeep & Willys with Dana 18 transfer case
Part # 7371591
$32.99
MSRP:
![Transfer Case Breather Vent Fits 41-71 Jeep & Willys with Dana 18 transfer case](https://www.kaiserwillys.com/app/uploads/2020/03/a934_b_1__61136.1653396484.1280.1280-370x370.jpg)
Transfer Case Breather Vent
Fits 41-71 Jeep & Willys with Dana 18 transfer case
Part # A934
$34.99
MSRP:
![Transfer Case Drain Plug Fits 41-71 Jeep & Willys with Dana 18 transfer case](https://www.kaiserwillys.com/app/uploads/2020/03/a1104_a__79796.1653395658.1280.1280-370x370.jpg)
Transfer Case Drain Plug
Fits 41-71 Jeep & Willys with Dana 18 transfer case
Part # A1104
$7.99
MSRP:
![Transfer Case Intermediate Shaft Lock Plate Fits 41-66 Jeep & Willys with Dana 18 transfer case](https://www.kaiserwillys.com/app/uploads/2020/03/a1001_b_1__45072.1653396475.1280.1280-370x370.jpg)
Transfer Case Intermediate Shaft Lock Plate
Fits 41-66 Jeep & Willys with Dana 18 transfer case
Part # A1001
$4.99
MSRP:
![Transfer Case Output Shaft Front Bearing Cap Gasket Fits 41-71 Jeep & Willys with Dana 18 transfer Case](https://www.kaiserwillys.com/app/uploads/2020/03/a957_b_1__36484.1653396481.1280.1280-370x370.jpg)
Transfer Case Output Shaft Front Bearing Cap Gasket
Fits 41-71 Jeep & Willys with Dana 18 transfer Case
Part # A957
$5.24
MSRP:
![Transfer Case Shift Lever Pin Set Screw Fits 41-66 Jeep & Willys with Dana 18 transfer case](https://www.kaiserwillys.com/app/uploads/2020/03/a973_a_1__39607.1653396399.1280.1280-370x370.jpg)
Transfer Case Shift Lever Pin Set Screw
Fits 41-66 Jeep & Willys with Dana 18 transfer case
Part # A973
$3.99
MSRP: