Product Videos
Questions & Answers
I need an oil line longer than 20" for a '43 Willys. Will this fit?
Willys Jeep Parts Tech:
Please send us some photo of what you have. They were originally 22 and 10" long.
Please send us some photo of what you have. They were originally 22 and 10" long.
you said that this hose connects in front of the fuel pump low on the galley. The fuel pump is about as far forward as it can be, tight up against the engine mount bracket. the only port I see near the area is under the pump, not sure if the hose will reach it or if it is the right size? what am I missing. is there a photo / diagram I can look at?
Willys Jeep Parts Tech:
You can email mike@kaiserwillys.com and we can send some photos of motor over to you. Thanks!
You can email mike@kaiserwillys.com and we can send some photos of motor over to you. Thanks!
I purchased part # 648865, steel oil pressure line, Where does it go?
Willys Jeep Parts Tech:
Rear corner on the drivers side of the block. From the lower galley on up to the top as a return.
Rear corner on the drivers side of the block. From the lower galley on up to the top as a return.
where does the hose connect on the engine end
Willys Jeep Parts Tech:
Just forward of the fuel pump on the lower galley.
Just forward of the fuel pump on the lower galley.
YOU MIGHT ALSO BE INTERESTED IN
