Questions & Answers
Questions: How much to ship these side steps to the UK ? How long to ship to the UK ?
Question By: Derrick Brown on Mar 24 2020 3:54 PM
Please email firstname.lastname@example.org and we can quote you out. We need your full shipping address.
Answer By: Willys Jeep Parts Tech on Mar 24 2020 11:01 AM
Questions: howdy- are all the hardware parts the same size- diagram says everything is 29-04--- thanks--q&a helps a lot--very brave--- oz
Question By: Dennis Osborne on Dec 31 2019 11:57 PM
Thru your floor board the hardware will be different than lengths to bolt steps together to short brackets.
Answer By: Willys Jeep Parts Tech on Jan 2 2020 5:43 AM
Questions: Does the fuel tank have to be removed to bolt through drivers side floor?
Question By: Gerry on Aug 6 2019 10:25 PM
Yes, you will need to remove it to install.
Answer By: Willys Jeep Parts Tech on Aug 7 2019 6:39 AM
Questions: will these clear the fuel tank on an m38a1??
Question By: John Mckee on Jul 27 2019 12:32 PM
You have to shorten the side brackets that support the step.
Answer By: Willys Jeep Parts Tech on Jul 29 2019 5:50 AM
Questions: What is the weight rating for these steps? Do these mount to existing holes or is drilling required? 1948 CJ-2A
Question By: BILL on Jun 1 2018 2:37 AM
Not sure on a weight rating but you will need to drill holes in the floor board for the short steps. See install instruction link. Just make sure to use large body washers and you shouldnt have any problems.
Answer By: Willys Jeep Parts Tech on Jun 1 2018 5:44 AM
Questions: HOW FAR DOES THE STEP EXTEND BELOW THE BODY
Question By: WAYNE JOHANNES on May 9 2018 12:00 AM
Approx 5-1/4" drop.
Answer By: Willys Jeep Parts Tech on May 9 2018 6:52 AM
Questions: could you please tell the weight of the pair? Thanks!
Question By: Eduardo Hernandez on Aug 3 2017 2:53 AM
Approx 12 pounds
Answer By: Willys Jeep Parts Tech on Aug 3 2017 5:50 AM
Questions: Why do they make step angled to the tub?
Question By: Ron on Jun 25 2014 12:00 AM
Because you usually enter a vehicle from the back in a parking lot. Each step should angle to the back.
Answer By: Willys Tech on Jun 26 2014 12:00 AM
Questions: Can these be modified to fit a 42MB?
Question By: Dan H on Feb 17 2014 12:00 AM
Yes these can be made to fit by shortening the brackets a bit.
Answer By: Willys Tech on Feb 18 2014 12:00 AM
Questions: I bought a step kit 646150K and you did not send any instructions! Please email them to me!
Question By: Dennis Niccum on Jan 26 2014 12:00 AM
Please see link above for the instructions. You can also call us toll free and we can walk you thru it. Thanks!
Answer By: Willys Tech on Jan 27 2014 12:00 AM
Questions: Do you have any photo's of steps installed ? Thinking of adding to my M38
Question By: Tom on Jan 1 1970 12:00 AM
See link above for install instructions. It shows it together. You can also check out our customer photo section.
Answer By: Willys Tech on Oct 21 2013 12:00 AM
Questions: Does the step kit extend down so far as to hinder you from doing some off-roading?
Question By: Joe Hinz on Sep 16 2013 12:00 AM
No you should have any problems with that.
Answer By: Willys Tech on Sep 17 2013 12:00 AM
Questions: Do these come in a stainless/chrome finish?
Question By: Chris on Mar 23 2013 12:00 AM
These are primered black.
Answer By: Willys Tech on Mar 25 2013 12:00 AM
Questions: Do these steps come with installation instructions for a 1967 Jeep CJ-5 ? If there are no instructions to install do you have any pictures of steps installed on a 67 CJ5?
Question By: Anonymous on Jan 30 2013 12:00 AM
There are instructions posted for it shortly above online. We can also fax them to you too.
Answer By: Willys Tech on Jan 30 2013 12:00 AM
Questions: Will these steps fit a 1974 CJ-5
Question By: Andrew on Jan 1 1970 12:00 AM
Yes they should work fine.
Answer By: Willys Tech on Jul 7 2011 12:00 AM
Questions: do you have item #646150kc to fit a cj2a 45 jeep willys?
Question By: JOYE CUMBEE on Jan 18 2011 12:00 AM
Yes, this will fit, but you may have to shorten up the brackets for install.
Answer By: Willys Tech on Jan 19 2011 12:00 AM