Product Videos
Questions & Answers
I currently have a steel line from the block that connects to the A1198-ST line on my '46 cj2a. Does this flex hose replace that?
Willys Jeep Parts Tech:
No, the steel line and the flex line are both required. The steel line is A-1198-ST. Thanks
No, the steel line and the flex line are both required. The steel line is A-1198-ST. Thanks
WHICH FLEX LINE GOES FROM THE BOTTOM OFTHE OIL FILTER TO THE BLOCK?
Willys Jeep Parts Tech:
647583 & 647584 for the WIllys MB & Willys CJ2A and CJ3A.
647583 & 647584 for the WIllys MB & Willys CJ2A and CJ3A.
Where does this line connect to block?
Willys Jeep Parts Tech:
This would go in the lower bottom port on the drivers side of the engine block.
This would go in the lower bottom port on the drivers side of the engine block.
what size fittings are on this hose A1198 ?
Willys Tech:
1/4 inverted male x 1/4 inverted female like original.
1/4 inverted male x 1/4 inverted female like original.
Do you have flexible hose that attaches to block to pressure gauge for 1954 CJ-3B?
Willys Tech:
This one should work for the early CJ-3B with multiple gauges.
This one should work for the early CJ-3B with multiple gauges.
will this fit the 1942 flat 4 also
Willys Tech:
Yes it should work just fine.
Yes it should work just fine.
Is this the engine flex line that connects to the oil pressure gauge steel line fitting on the firewall?
Willys Tech:
Yes, that is correct. Block to steel line.
Yes, that is correct. Block to steel line.
YOU MIGHT ALSO BE INTERESTED IN
