Questions & Answers
Is the photo reversed in the pictures? It seems like this isn’t the passenger side.
Willys Jeep Parts Tech:
We'll check the image but the part will be correct for the passenger side.
We'll check the image but the part will be correct for the passenger side.
I have a 1953 Kaiser Manhatan 4 door I need side panels and inside floor do carry these items
Willys Jeep Parts Tech:
Sorry, those you have to have fabricated there locally.
Sorry, those you have to have fabricated there locally.
Can you email me the instructions for installing this steering kit. I would like to look through them to see if it is something I think I can handle. Thank you.
Willys Tech:
I can have the manufacture give you a call to go over. Please call me toll free or email mike@kaiserwillys.com your phone number and we can help. Thanks!
I can have the manufacture give you a call to go over. Please call me toll free or email mike@kaiserwillys.com your phone number and we can help. Thanks!
Does this have the indent for the axe handle at the front edge where this panel meets front section? For a M38.
Willys Tech:
I believe we can have this done for you for the M38.
I believe we can have this done for you for the M38.
I have a 64' cj5 with a PTO Winch on the front. Will this kit fit with the PTO shaft running next to the frame rail?
Willys Tech:
I believe you will have clearance issues due to the PTO.
I believe you will have clearance issues due to the PTO.
Can I use this and still keep my PTO winch?
Willys Tech:
I beleive so but it depends on type of winch you are running.
I beleive so but it depends on type of winch you are running.
The instructions for the installation of this product calls for 2 new tie rods to be installed with it- are these proprietary and available only on your website (if so what is the part # on your website so I can order), or does the installation necessitate replacing the existing tie rods? Thx for your time
Willys Tech:
I believe your existing will work but will have to check.
I believe your existing will work but will have to check.
I have a 1965 CJ5 with the Perkins diesel. Do you think this kit will fit?
Willys Tech:
I think it would but you will probably have some obsticles to overcome.
I think it would but you will probably have some obsticles to overcome.
i am working on a willys truck, it has a L 226 super hurricane motor. could u tell me whitch kit will work to convert to power steering?
Willys Tech:
We are working on a kit now for this. It may be some time before they are availble for the Willys Truck and Station Wagon.
We are working on a kit now for this. It may be some time before they are availble for the Willys Truck and Station Wagon.
Can you use the original steering column with this conversion? My CJ2A has had the front crossmember cut out and this conversion sounds like an answer to multiple problems if I can use the original steering column and steering wheel.
Willys Tech:
No, you will have to use one of the setups listed above.
No, you will have to use one of the setups listed above.
Do you have a kit that will work on a 1957 Willys truck ?
Willys Tech:
We are working on developing one now.
We are working on developing one now.
Will this setup work on a M38? If not, can you explain why? Thanks.
Willys Tech:
Yes it should work just fine for you.
Yes it should work just fine for you.
Will this work on a 1943 gpw with a chevy v6 motor in it?
Willys Tech:
Yes it should be fine but you may have some clearance issues that would have to be worked out.
Yes it should be fine but you may have some clearance issues that would have to be worked out.
how high up does this panel go?
Willys Tech:
Approx 3
Approx 3
will a ross manual gearbox part number e8ht 3504 aa casting 504cc007 work with this conversion
Willys Tech:
The ones listed are the boxes we know will work.
The ones listed are the boxes we know will work.
will this conversion work on a 1971 CJ5 with the 225 V6 Buick/Willys engine?
Willys Tech:
Try part number: CJPOWERSTEERV6
Try part number: CJPOWERSTEERV6
Will this work on a 53 M38a1 with a ford 289?
Willys Tech:
It should work fine.
It should work fine.
do you have a power steering adapption kit for a 56 willys wagon?
Willys Tech:
We are working on one now.
We are working on one now.
Is there a kit for the power steering pump bracket?
Willys Tech:
Please call us toll free. We may be able to help out.
Please call us toll free. We may be able to help out.
does this part CJPOWERSTEERV6 come with complete instructions and/or illustrations re installation?
Willys Tech:
Yes, it comes with complete instructions.
Yes, it comes with complete instructions.
Will this steering conversion work with a small block chevy conversion on a 42 MB as well?
Willys Tech:
It may but you would have to do some modification there locally to it.
It may but you would have to do some modification there locally to it.
