Questions & Answers
Questions: Just had to replace my Denso starter (thanks for getting it to my mechanic quickly). Can you recommend anyone to repair the old one for potential future use? Thanks, Steve
Question By: Steve on Oct 3 2018 10:56 PM
Please email firstname.lastname@example.org about what you have there and we can help.
Answer By: Willys Jeep Parts Tech on Oct 4 2018 5:38 AM
Questions: We have a 1951 Willys Jeep CJ-3A, it has a 1951 M38 F series motor. We bought a starter for it but the inner flange is 1/8 too large and .060 to thick, what starter do we need?
Question By: Kim on Sep 23 2014 12:00 AM
Because you have a mix 'n match vehicle we will need to get your old starter motor number and match them for you. Please call us toll free. We are happy to help.
Answer By: Willys Tech on Sep 24 2014 12:00 AM
Questions: Will this starter work with a 129 tooth flywheel ?
Question By: Lee Carr on Sep 16 2014 12:00 AM
The CJ-3A originally had a 124 tooth flywheel. Make sure when matching the hi-torque starter you match to the original starter in the item description.
Answer By: Willys Tech on Sep 16 2014 12:00 AM
Questions: cj-3a 134 L, conversion from 6, to 12 volt.Has off/on switch, Push linkage on floor. Will I have to hook this starter to a button.
Question By: Ron on Sep 6 2014 12:00 AM
Typically you wire it up thru the ignition. See install instructions above.
Answer By: Willys Tech on Sep 8 2014 12:00 AM
Questions: I have a 1949 CJ3A with a 97 tooth ring gear flywheel on it ,will this starter work for me that I can bolt it right on ?
Question By: MIKE on Feb 3 2014 12:00 AM
The CJ-3A should have a 124 tooth flywheel. Please call us toll free with your starter motor in hand and we can help you ID what you need. Thanks!
Answer By: Willys Tech on Feb 3 2014 12:00 AM
Questions: How can I convert the foot starter on a 1952 CJ3A to a push button? My legs are not long enough to reach the foot starter.
Question By: Buddy on Dec 13 2013 12:00 AM
If you are 12 volt system this starter motor will do the trick.
Answer By: Willys Tech on Dec 13 2013 12:00 AM
Questions: Do I need to change / worry about my bellhousing starter bushing if I upgrade to one of these
Question By: John on Jun 27 2012 12:00 AM
No you do not have to worry about that.
Answer By: Willys Tech on Jun 29 2012 12:00 AM
Questions: how do you wire this starter
Question By: Shaun Cooper on Jun 14 2012 12:00 AM
Please call us toll free. We can email or fax you over instructions. We are working on posting them to the site now too.
Answer By: Willys Tech on Jun 15 2012 12:00 AM
Questions: Do you have pinion repair parts for this starter?
Question By: Tom on May 9 2012 12:00 AM
Yes we always can get parts for these.
Answer By: Willys Tech on May 10 2012 12:00 AM
Questions: do i still need a seperate solenoid?
Question By: Anonymous on Mar 28 2012 12:00 AM
No you dont.
Answer By: Willys Tech on Mar 28 2012 12:00 AM
Questions: I have a 1950 CJ3A with the MZ-4162 starter. Part # 641157-12V says for MZ -4137. Will this part work?
Question By: Anonymous on Mar 16 2012 12:00 AM
Yes this is the correct one for you.
Answer By: Willys Tech on Mar 19 2012 12:00 AM
Questions: I am converting my 1952 Willys M38 to 12 volt. Will this starter work for that application?
Question By: Anonymous on Nov 27 2011 12:00 AM
You want to order part number: 925520-12V for your M38 or M38A1 in 12volt.
Answer By: Willys Tech on Nov 28 2011 12:00 AM
Questions: I have a 1951 Cj3a with a push to start pedal that engages the starter. The starter drags. Any suggestions at to what I need. Is there a replacement starter should this one not be rebuilt.
Question By: TD on Jul 21 2011 12:00 AM
This starter motor solves that problem and is a direct bolt in. It does away with the mechanical linkage.
Answer By: Willys Tech on Jul 21 2011 12:00 AM
Questions: I need to know the weight of this starter motor?
Question By: Franco on Jan 1 2011 12:00 AM
They are approx 10 pounds.
Answer By: Willys Tech on Jan 3 2011 12:00 AM
Questions: I have a 1952 CJ3A. it has a 124 tooth flywheel and a 8.5" clutch. The jeep has an F-head from an unknown CJ5. My flywheel and starter stripped. I don't know if it was from use/age or improper starter-flywheel combo. The starter I have is a 9 tooth bendix with PS256 stamped into starter housing. I do not have any starter id tags. I want a gear reduction 12v starter for this project. What do I need? Was this starter originally for a CJ3A or CJ5?
Question By: Matthew Glover on May 8 2016 4:41 PM
Please call us toll free. We will ask some questions and get some measurements from you and we can get you set up.
Answer By: Willys Tech on May 9 2016 5:48 AM