Questions & Answers
Questions: Can you tell me the hole spacing for the 6 bolt holes please?
Question By: Lucas Reid on Jan 22 2020 6:20 PM
Please email firstname.lastname@example.org the exact measurement you are looking for. Hole to hole next to each other or across from one another.
Answer By: Willys Jeep Parts Tech on Jan 22 2020 11:23 AM
Questions: will the 640763-12v fuel gage work with the 914850 sending unit?
Question By: Don Dethorne on Mar 20 2019 12:18 AM
Yes, this should work.
Answer By: Willys Jeep Parts Tech on Mar 20 2019 6:11 AM
Questions: Will this fit a 1961 Will's truck? If not do you carry one that does? Thanks
Question By: Tim on Jul 10 2018 10:43 PM
914849 is what you want for your Willys Truck.
Answer By: Willys Jeep Parts Tech on Jul 11 2018 5:49 AM
Questions: I just installed one of these with a new gauge. I did get the correct ohms. But the gauge shows it full all the time. Any hints?
Question By: Rob on Apr 16 2018 11:28 AM
Give us a call toll free and we can go over some other things to check. Thanks
Answer By: Willys Jeep Parts Tech on Apr 16 2018 5:30 AM
Questions: what are the operating ranges on oms of this unit so I know that it will work with gage.
Question By: cory on Apr 28 2017 6:32 PM
73 E 10 F
Answer By: Willys Jeep Parts Tech on Apr 28 2017 12:09 PM
Questions: I recently purchased your 6 volt gauge 640763 for use in my '34 Ford. I now realize that my current new fuel sending unit has the wrong resistance range for this gauge. From your web site I have learned that this sending unit is recommended for tanks with 6 bolt holes. Before I throw more money on this project would you please tell me what bolt circle diameter does this unit have.
Question By: Bill Brown on Feb 25 2017 5:47 PM
Please call us toll free and we can try to help you out with all of this.
Answer By: Willys Jeep Parts Tech on Feb 27 2017 5:44 AM
Questions: I am looking for a sending unit for a 1970 CJ5. The tank is under the drivers seat. It has a 12 volt system. Is this the part I need?
Question By: brad on Dec 10 2016 9:15 PM
Yes this would be correct for you if you are a 6 hole style tank or part number: 948696 if your lock tab style.
Answer By: WIllys Jeep Parts Tech on Dec 12 2016 5:43 AM
Questions: I have a 1946 CJ-2A. The underseat fuel tank has 6 holes instead of the 5 holes shown for a CJ-2A fuel sender. Will this one work?
Question By: Charles on Sep 1 2016 6:59 PM
That would be an unoriginal tank then in your CJ-2a. Please email email@example.com some pictures and we can help you ID what you need.
Answer By: Willys Jeep Parts Tech on Sep 6 2016 5:57 AM
Questions: Have older Willys truck; Probably going to HAVE to replace gauge in dash.. but want to install (build) a set of fuel tanks and will need senders. What concerns me here is if these senders will be compatible. More specifically, WHAT is the resistance range .. spec.. of these senders? Empty... and Full readings ? Im well versed in electronic theory... so let it roll!!
Question By: gary on Jun 10 2016 9:48 AM
Willys Truck are 8-10 Full and 70-80 Empty CJ-5 is 7-9 Full and 130-140 Empty
Answer By: Admin on Jun 13 2016 5:51 AM
Questions: Will this work on my 1959 FC 170?
Question By: binderboy on Nov 22 2014 12:00 AM
If you are 6 hole sending unit then it should.
Answer By: Willys Tech on Nov 24 2014 12:00 AM
Questions: I have a 1957 Willys CJ5 - I recently bought a Omix-ADA speedometer from you for it that includes the temp and fuel gauges built in...will this sending unit work with the required specs to activate the gauge (ohms etc...) also i would assume that the single white wire that hooks up to the speedometer is all i need to ensure functionality right? I appreciate your assistance!
Question By: Anonymous on Nov 10 2014 12:00 AM
Yes they are compatible with one another. See 914845 part number for the wiring diagram. Yes just one wire goes to this sending unit.
Answer By: Willys Tech on Nov 11 2014 12:00 AM
Questions: Will this sending unit work with an aftermarket gauge?
Question By: Justin on Oct 5 2014 12:00 AM
Yes as long as the ohms is correct on it.
Answer By: Willys Tech on Oct 6 2014 12:00 AM
Questions: Im confused on how to hook up, should the positive wire be hooked to the top of the sending unit to get it to read at the gauge or the negative wire. Thanks, Tim
Question By: Anonymous on Oct 3 2014 12:00 AM
You should have it connected to the 's' post on your gauge.
Answer By: Willys Tech on Oct 6 2014 12:00 AM
Questions: Does this include the line that runs into the fuel tank and picks up the fuel?? I have a 62cj5 with mechanical fuel pump on a different motor
Question By: Mike on Sep 24 2014 12:00 AM
That is part of the wiring harness itself.
Answer By: Willys Tech on Sep 29 2014 12:00 AM
Questions: I have a 1967 Jeepster Convertible with the 225 V6. Several years ago, I replaced the fuel tank with one from a Commando from the same year. I believe the tanks are identical with the exception of one exterior mounting tab. Which sending unit, gasket, and return line do I need?
Question By: J.B. on Jan 1 1970 12:00 AM
914849A is the part number you need.
Answer By: Willys Tech on Sep 15 2014 12:00 AM
Questions: Is there a replacement float for this sending unit? Mine cracked where the wire wraps around it.
Question By: Randy Allen on Jul 21 2014 12:00 AM
17729.01 is the part number for the float.
Answer By: Willys Tech on Jul 22 2014 12:00 AM
Questions: Have an M38A1 that has been converted to 12 volts, will this be an exact replacemnt the stock 24Volt fuel sender
Question By: peter on Jul 3 2012 12:00 AM
The M38A1 has a five hole sending unit. The one for the CJ-5 is a six hole sending unit. I would use part number: 640694 if you are 12 volt for a M38A1.
Answer By: Willys Tech on Jul 3 2012 12:00 AM
Questions: do you know what the ohms (resistance)reading is for this sender?
Question By: bob on Feb 20 2012 12:00 AM
8-10 Full and 70-80 Empty
Answer By: Admin on Feb 20 2012 12:00 AM
Questions: I currently have a reproduction gauge cluster on my 62 CJ5 that doesn't work with the factory sending unit. Will this sending unit work with the reproduction gauge?
Question By: Anonymous on Nov 22 2011 12:00 AM
Yes this is the proper sending unit for a CJ-5
Answer By: Willys Tech on Nov 22 2011 12:00 AM