Questions & Answers
Questions: Do you have a diagram available that shows how the fuel line from the tank to the fuel pump on a 47 CJ is supposed to run?
Question By: william casaus on Jun 29 2021 9:17 PM
Runs along the frame rail. Email firstname.lastname@example.org with any questions.
Answer By: Willys Jeep Parts Tech on Jun 30 2021 5:49 AM
Questions: WIll this Fuel Line Kit work with the Plastic Fuel Tank (MTS-005), where the fuel line hook up is on the top of the tank? Will it be long enough?
Question By: Chase G on Aug 13 2019 10:51 PM
This fuel line kit is for the original tanks. If you have the poly tank, you would just have to modify to fit upto the aftermarket tank.
Answer By: Willys Jeep Parts Tech on Aug 14 2019 5:52 AM
Questions: What is the diameter of the hard line: 1/4", 5/16", or 3/8"?
Question By: Diggity Kid on Mar 9 2018 4:07 PM
The diameter is 1/4". Thanks
Answer By: Willys Jeep Parts Tech on Mar 9 2018 12:23 PM
Questions: Before I order this I need to repair the threads on the tank. What is the thread size on the female tank side so I can use the correct tap size?
Question By: Marshall Hewitt on Sep 11 2017 11:47 PM
They are a 1/4 fuel line line fitting.
Answer By: Willys Jeep Parts Tech on Sep 12 2017 5:54 AM
Questions: I have a 1948 cj2a with two gas tanks, one under each seat do you have a steel line set up for this? and how does set up work ?
Question By: don Hagan on Aug 15 2017 11:11 PM
We do have it for the drivers side but the passenger side you will have to fabricate on your end.
Answer By: Willys Jeep Parts Tech on Aug 16 2017 5:53 AM
Questions: Does this kit (MS01200) comes with the flex hose and 90 degree fittings that are shown in the image along with the steel lines?
Question By: Wesley on Aug 8 2017 12:07 AM
Yes, it will come with what is in the photos shown.
Answer By: Willys Jeep Parts Tech on Aug 8 2017 6:02 AM
Questions: will this fit a 49 jeepster?
Question By: josh johnson on Sep 30 2016 12:53 PM
No, I'm sorry this is just for the CJ-2A. No one makes a fuel line kit for the Jeepster. You'll have to go locally, buy the preformed lines and bend them to fit. Thanks
Answer By: Willys Jeep Parts Tech on Sep 30 2016 5:56 AM
Questions: Can I get just the line from pump to carburetor?
Question By: Wiz on May 24 2015 12:00 AM
Sorry, these only come in as a kit.
Answer By: Willys Tech on May 26 2015 12:00 AM
Questions: does it come with the flex hose from the frame tube to the fuel pump ?
Question By: Anonymous on Apr 30 2015 12:00 AM
This is the steel line kit only. We do sell the flex line separately.
Answer By: Willys Tech on May 1 2015 12:00 AM
Questions: Hello. I am putting together a basket case 47 CJ2A with an F Head. Assuming I will just need to make my own lines, correct? Thanks,
Question By: Anonymous on Feb 1 2015 12:00 AM
Yes if you have an unoriginal engine.
Answer By: Willys Tech on Feb 2 2015 12:00 AM
Questions: I have a 47 willy's CJ2A that I replaced the hard lines from the fuel tank to the pump and carburetor with 1/4 fuel hose. I did this after removing the gas tank and having it cleaned due to being rusted and causing clogged up line problems. Is the fuel hose O.K. to use or will it suck together when gas is being pumped to the carb? I'm still having problems with it not getting enough gas to the pump and don't know if it's still a clogged up issue or if the fuel hose is sucking together.
Question By: Dale on Jan 21 2015 12:00 AM
Fuel hose is usually fine. It is designed typically to be trouble free and not do that.
Answer By: Willys Tech on Jan 21 2015 12:00 AM
Questions: Will this also fit a 1951 CJ3A?
Question By: Rhody on Aug 27 2014 12:00 AM
Yes these will fit the CJ-3A as well with minor bending.
Answer By: Willys Tech on Aug 27 2014 12:00 AM
Questions: Will this work with the Solex carburetor?
Question By: Anonymous on Jul 18 2013 12:00 AM
Yes this should work just fine.
Answer By: Willys Tech on Jul 18 2013 12:00 AM
Questions: what thread size is male tank fitting on 48 CJ2A. I need to get a tap and die to chase the threads which are nicked but not bad.
Question By: Anonymous on Jul 9 2013 12:00 AM
Its takes a 1/4 fuel line on the outlet just like original.
Answer By: Willys Tech on Jul 9 2013 12:00 AM
Questions: Do you have a kit like this for a 1950 Willy's Jeepster with the F-head 4?
Question By: Anonymous on Mar 20 2013 12:00 AM
You have to go up to your local NAPA. They sell predetermined length preflared lines. You can just bend from there.
Answer By: Willys Tech on Mar 20 2013 12:00 AM
Questions: I need a fuel line for my 63 willys pickup, where can I get one of them?
Question By: Colby on Jul 11 2012 12:00 AM
I would make it. Your local NAPA sells predetermined lengh preflared steel line that can be bent to shape.
Answer By: Willys Tech on Jul 12 2012 12:00 AM
Questions: Do you have fuel lines for cj2a with replacement plastic tank with fuel outlet on top of the tank?
Question By: Bryan G on Dec 24 2011 12:00 AM
Yes, please give us a call and we can go over the options. Thanks
Answer By: Willys Tech on Dec 26 2011 12:00 AM
Questions: is it commen for the fuel system to vaper lock if fuel lines are not ran properly
Question By: Don on Jul 20 2011 12:00 AM
Only if you are running it too close to a heat source.
Answer By: Willys Tech on Jul 21 2011 12:00 AM
Questions: Do you have these lines for a CJ3A?
Question By: Anonymous on Mar 15 2011 12:00 AM
This is the closest kit available for it.
Answer By: Willys Tech on Mar 15 2011 12:00 AM
Questions: do you offer this complete formed steel line kit for a 1953 cj-3b.
Question By: Anonymous on Jan 14 2011 12:00 AM
No, that is not being reproduced anywhere. You have to make this. Your local NAPA sells preformed preflared steel line in various lengths. You can hand bend it or use a tool.
Answer By: Willys Tech on Jan 14 2011 12:00 AM