Product Videos
Questions & Answers
Sort By:
Questions: Are the bends in the line that we get from you exact or do we gently bend to conform as we run the line??
Question By: Todd Buczek on Nov 5 2020 7:22 PM
There may be some minor bending you will have to do but for the most part it is a pre-bent kit. Thanks
Answer By: Willys Jeep Parts Tech on Nov 9 2020 3:50 AM
Questions: This won't work with the Buick v6 225?
Question By: Chase Crum on Apr 24 2020 11:06 AM
That's correct. It's only for the 4-cylidnder. Thanks
Answer By: Willys Jeep Parts Tech on Apr 24 2020 6:29 AM
Questions: do you carry the fuel line kit for the 4-134 F engine in a 1951 truck?
Question By: Dennis Flowers on Apr 9 2020 3:55 AM
Sorry, that kit you have to bend there locally and make.
Answer By: Willys Jeep Parts Tech on Apr 9 2020 5:52 AM
Questions: Will this fit a 1970 CJ5 with the tank mounted to the frame underneath the rear seat?
Question By: Rob on Jan 16 2020 10:07 PM
No, sorry this is for the under seat tank with 4-134 F motor only in the CJ-5.
Answer By: Willys Jeep Parts Tech on Jan 17 2020 5:57 AM
Questions: I bought the kit for a 62 CJ5 but the lines don't match up to the original fuel pump and carb. Is there a diagram available to show me how to position the line to match up with the fuel pump out and the carb? Or did I order the wrong kit?
Question By: Darrell Hackler on Jul 13 2019 3:39 PM
As long as you have the original dual action fuel pump and Carter YF carburetor it will match up. Please email mike@kaiserwillys.com and we can help out.
Answer By: Willys Jeep Parts Tech on Jul 15 2019 5:38 AM
Questions: I need a gas line for cj6 1957. Info on page shows cj5. Will it work on cj6?
Question By: David H. Duncan on May 20 2019 12:14 PM
The CJ-6 fuel line will be the same as the CJ-5.
Answer By: Willys Jeep Parts Tech on May 20 2019 5:32 AM
Questions: Do you sell separately ? I want only the line that runs from the fuel pump to carburetor.
Question By: David on Feb 23 2019 3:36 PM
No, I'm sorry. This is sold in a kit only. Thanks
Answer By: Willys Jeep Parts Tech on Feb 25 2019 4:52 AM
Questions: Will this fuel ine work on a 51 pickup, from tank to carb?
Question By: dennis nitschke on Nov 8 2018 7:55 PM
No, this is for the Willys CJ-5 only.
Answer By: Willys Jeep Parts Tech on Nov 9 2018 5:32 AM
Questions: I purchased the steel fuel lines for a 65 cj5 with 134 f head. Can't figure out how to run them, not even close to getting from fuel pump to carb. Any help would be welcome.
Question By: derek on Jun 29 2014 12:00 AM
Your fuel pump should be marked 'in' and 'out' The in takes the fuel line from the tank and the out goes to the carb.
Answer By: Willys Tech on Oct 27 2014 12:00 AM
Questions: I have a 66 CJ5 with the Dauntless V6. Do you have a fuel line kit for this model?
Question By: Anonymous on Jan 2 2014 12:00 AM
We can help you out and make sure everythng is stock on your vehicle. Please call us toll free.
Answer By: Willys Tech on Jun 30 2014 12:00 AM
Questions: do you sell just the prebent line that goes from the fuel pump to the carburetor?
Question By: charles on Apr 22 2013 12:00 AM
For the V6 you have to make your own fuel line.
Answer By: Willys Tech on Jan 2 2014 12:00 AM
Questions: Are there clips in this set? Mine did not come with any. Also can you provide any details on the routing from the fuel tank to the fuel pump? Mine was so chopped and twisted that I can't tell where it was supposed to run.
Question By: Anonymous on May 17 2012 12:00 AM
Yes I believe they do. The fuel line is prebent and preflared. It runs from the tank along the frame rail to the fuel pump. Then from fuel pump to the carb.
Answer By: Willys Tech on May 17 2012 12:00 AM
Questions: where do i get the clips for the frame for the fuel line
Question By: paul on Apr 16 2012 12:00 AM
This fuel line set will come with the clips.
Answer By: Willys Tech on Apr 17 2012 12:00 AM
Questions: I can install it on a cj3b?
Question By: gonzalo on Feb 9 2012 12:00 AM
Possibly with modification.
Answer By: Willys Tech on Feb 10 2012 12:00 AM
Questions: how can i install a fuel filter on to the steel lines?
Question By: matt on Sep 29 2011 12:00 AM
Just splice it in with rubber lines.
Answer By: Willys Tech on Sep 30 2011 12:00 AM
You Might Also Be Interested In
Weekly Willys highlights and discounts sent to your inbox
