Questions & Answers
Questions: Do you have the kit for the manual wiper?
Question By: Nicholas Vital on Aug 1 2020 5:01 PM
We sure do. Tandem kit is number - A11433 and the single kit is number - MANWIPER. Thanks
Answer By: Willys Jeep Parts Tech on Aug 3 2020 4:02 AM
Questions: I need to know if do you need to purchase 2 sets (one for driver side and one for passenger side)? Can you also tell me if i purchase one do you supply the linkage for the arm and bald? thank you arta
Question By: Arta on Dec 5 2019 11:23 AM
This will do one wiper motor. They are for the after market elctric wiper motors part numbers: 6V, 12V, or 24V.
Answer By: Willys Jeep Parts Tech on Dec 5 2019 6:33 AM
Questions: What is the approximate length of the wiper blade?
Question By: Tod Burke on Nov 26 2017 10:25 PM
The length on the arm is 9". Thanks
Answer By: Willys Jeep Parts Tech on Nov 27 2017 5:45 AM
Questions: Can I buy a replacement wiper blade separately. I have two good arms just need blades
Question By: Robert Tenbusch on Aug 31 2017 1:03 AM
Sorry, we can only get these in as kits.
Answer By: Willys Jeep Parts Tech on Aug 31 2017 5:54 AM
Questions: What size motor stud does it fit on...approximately ?
Question By: Rick Snyder on May 25 2017 4:03 PM
It is designed to fit on a shaft approx. 1/4"
Answer By: Willys Jeep Parts Tech on May 25 2017 10:39 AM
Questions: is there a passenger wiper and linkage available ?
Question By: Anonymous on Nov 4 2013 12:00 AM
This works for both passenger and drivers side.
Answer By: Willys Tech on Nov 4 2013 12:00 AM
Questions: I have an American Boush 12V Electric Wiper. It is top mounted and has a spline shaft with an acorn nut to hold the wiper arm in place. Is this the correct replacement arm and blade for my 1964 C J5?
Question By: Brad on Sep 25 2013 12:00 AM
Originally Willys used vacuum wiper motors. But this kit fits most aftermarket electric motor kits.
Answer By: Willys Tech on Sep 25 2013 12:00 AM
Questions: Hi, I have a 1941 willy's and I need to know the length of the arm and the blades. My windshield is only 13 high.
Question By: Anthony Gillette on May 8 2013 12:00 AM
These are actually adjustable. You will be all set on your MB/GPW with this.
Answer By: Willys Tech on May 9 2013 12:00 AM
Questions: I have a 1970 Kaiser-built postal jeep DJ5B. Since there isn't a lot of difference (in most cases), and my wipers are electric, will this arm & blade kit fit mine? I've found blades before, but I'd like to replace arms and blades on both sides.
Question By: Jim Baker on Apr 19 2012 12:00 AM
If you have electric this should work ok for you.
Answer By: Willys Tech on Apr 19 2012 12:00 AM
Questions: Is there any way to buy just the blades? I think my arms are fine the rubber has peeled off of the blade
Question By: Anonymous on Apr 14 2012 12:00 AM
They only come in these complete kits.
Answer By: Willys Tech on Apr 16 2012 12:00 AM
Questions: is this the correct arm/blade for the electric kit
Question By: Anonymous on Feb 26 2012 12:00 AM
Yes this is proper for the 6V or 12V electric kits.
Answer By: Willys Tech on Feb 27 2012 12:00 AM