Save 10% Off Site Wide. Enter PADDY10 Exclusions apply

FREE SHIPPING on all orders $98+ See Details

Select Your Currency
Close
  • Africa
  • Americas
  • Asia
  • Europe
  • Oceania
Shop Kaiser Willys

US Made Front Floor Pan Repair Panel for Drivers Side
Fits 54-64 Truck, Station Wagon

Part # SHTMTL-02A

New Steel Floor Pan Repair Panel for Drivers Side (curved Tunnel)

Made in the USA

Free Shipping on oversized item!!

Our own reproduction of the floor patch panel that is designed for the floors with the large transmission tunnel.

The floor measures 41-1/2" long and goes from the rear step up behind the tool box and go up the first bend towards the firewall 4". From side to side it covers and attaches to the rocker panel and floor like the original one does.

It also goes up the curve at the transmission tunnel 1 1/4" and covers from front of seat riser to 6+ inches up toe board. The proper beads are rolled into the floor at the feet area.

For 4 wheel drive vehicles only.

1 required per vehicle.

Fits:
54-64 Truck
54-64 Station Wagon
54-64 Sedan Delivery

Part # Price
SHTMTL-02A

$199.99

MSRP:

$199.99

MSRP:

1 Item has been added to your cart!
Close

Product Videos

Questions & Answers

Please Wait...

Ask Question Add Answer

All questions will be displayed after moderation. All answers will be displayed after moderation.

Does the part SHTMTL-02A for '55 Truck go completely under the Seat support 'storage area That I use for tool and tire chain repair items, as the panel shown doesn't have the curved cut out to fit around that area.

Willys Jeep Parts Tech:
Just to the front of the tool bin area.

I have a 1962 Willys Pickup and am looking at your Part # SHTMTL-02A I see at the forward right side there are "marks" and wondered what these are? One of my issues is just behind the accelerator pedal I have rust, does this panel cover that? All other areas look to be addressed. Thanks for the video

Willys Jeep Parts Tech:
Those are just production marks so that the proper angle can be cut. If you need further assistance, feel free to give us a call.

What Guage is the sheet metal

Willys Jeep Parts Tech:
They are OEM gauge thickness. I'll try to get a number.

Do you sell a complete front floor pan for a 1961 Willys wagon with boxes under the seats ?

Willys Jeep Parts Tech:
We have floor pans and floor pan braces. A complete 1 piece floor pan is not reproduced.

Will this fit a 63 Willys Wagon 2wd non planar driver side

Willys Jeep Parts Tech:
No, the proper floor pans for the 2WD Station Wagon are numbers 765690 & 765691. Thanks

I have a1963 utiltly wagon I putting dana 60 fullsize trucks differentials under conncected by four links suspension will I have any major problems with the front differential mounting?

Willys Tech:
Im sure you will have a lot of things that will have to be overcome. Driveline, suspension, steering, ect will have all have to be addressed.

Do you have a passenger side curved for 58 willeys

Willys Tech:
They were never curved on the passenger side. You need part number: SHTMTL-03

Do you have the passenger side in the curved tunnel as well?

Willys Tech:
The proper part number for the passengers side on all Willys Truck/Station Wagon is part number: SHTMTL-03

Will this floor pan fit a Sedan Delivery?

Willys Tech:
Yes, that is correct.
Request Catalog
X
THANK YOU! Your catalog request has been submitted successfully. Please note:

If your catalog does not arrive within 7-10 business days, call us Toll-Free at (888) 648-4923.

Email Subscription
X
THANK YOU! You have successfully subscribed to our newsletter.
Contact Form
X
THANK YOU! Your contact form request has been submitted successfully.
Photo Contest
X
SUCCESS! Your photo contest entry has been submitted!
Browser warning
The browser you are using to visit our website is no longer supported. For the best browsing experience, please visit us using a different browser.
I understand, close this message