Questions & Answers
Questions: I only need the rubber grease retaining cups for the shackles. The steel is still good. Is there a way to only purchase the rubber cups? I hate to waste the resources for the entire assembly. All the rubber is probably seventy some years old and is falling apart.
Question By: Ed Piotrowski on Apr 5 2018 2:39 PM
I dont usually have those by themselves. But call me toll free. Ask for me Mike M. I can help you out. Thanks!
Answer By: Willys Jeep Parts Tech on Apr 5 2018 9:31 AM
Questions: I PURCHASED P/N 802062 FOR MY M38 RIGHT FRONT PASSENGER SIDE WHICH HAS CW TO TIGHTEN AND CCW TO REMOVE IT WORKED GREAT. NOW I CHECKED MY LEFT FRONT DRIVER SIDE AND IT IS THE SAME AS THE RIGHT SIDE SHOULD I ORDER THIS ONE. I ORDERED THE 802061 BUT PART OF THE SHACKLE IS LH THREAD AND RH THREAD. WILL NOT WORK'. BECAUSE THREADS IN BOTH BUSHINGS ARE RH THREAD TO TIGHTEN AND REMOVE. THANKS DONNIE
Question By: donnie on Mar 16 2018 1:53 AM
Sounds like you need 802061 for your set up in that location.
Answer By: Willys Jeep Parts Tech on Mar 16 2018 6:13 AM
Questions: Do you know if this shackle will work for my M416 trailer??
Question By: Adam on Oct 18 2014 12:00 AM
This should work for you. I would double check visually with the image above that yours are the same too.
Answer By: Willys Tech on Oct 20 2014 12:00 AM
Questions: On my CJ3A the left front and right rear Shackle has one LH and one RH bushing. The kits seem to indicate all RH bushings but the manual indicates once a LH shackle bushing has been installed it is very difficult to replace with a RH thread. Do you have kits to allow for this original configuration?
Question By: Anonymous on Jul 30 2014 12:00 AM
802061 has the LH & RH threaded bushings.
Answer By: Willys Tech on Jul 31 2014 12:00 AM
Questions: I read in a Mechanics manual that later models of CJ series were manufactured with all RH thread. Is this true and would it be ok to install all RH thread shackles with bushings on a 48' CJ2A?
Question By: Tom on Jun 24 2013 12:00 AM
Alot of people do this and go to the RH threaded.
Answer By: Willys Tech on Jun 24 2013 12:00 AM
Questions: do you sell shackles & parts for cj 3b 1964
Question By: Eliud on Jun 20 2013 12:00 AM
Typically they used this shackle or part number: 916646. You just need to match up what you have in your vehicle.
Answer By: Willys Tech on Jun 20 2013 12:00 AM
Questions: before i remove the spring hangers and remove the shackles and brackets from the frame because they are rusted and worn through.do they come in kits for all of the pieces needed. how do i know where the right hand and the left hand threaded shackles go when assembling.
Question By: allen on Mar 24 2013 12:00 AM
Yes these are complete with fittings. You will know which when you take off the old ones. They will be either standard or reverse thread.
Answer By: Willys Tech on Mar 25 2013 12:00 AM
Questions: I have a 1962 M170, it has 2 wide springs, is this shackle for a 2 wide spring?
Question By: Dana on Jan 30 2013 12:00 AM
The leaf springs on 41-58 MB, GPW, CJ-2A, 3A, 3B, M38 were 1-3/4 originally.
Answer By: Willys Tech on Jan 30 2013 12:00 AM
Questions: When removing the spring shackles on my M-38, the front drivers side and the rear passenger side were left hand threads where connected to the springs. Is that correct?
Question By: Anonymous on Nov 8 2012 12:00 AM
Yes that is the most common set up.
Answer By: Willys Tech on Nov 9 2012 12:00 AM
Questions: Will this work with A-612 and A-614 closed ended style leaf springs?
Question By: Mike on Nov 5 2012 12:00 AM
Yes this is the proper shackle for those springs.
Answer By: Willys Tech on Nov 5 2012 12:00 AM
Questions: we are interested in four Leaf Spring Shackle Kit , for CJ3B, please we want to know the shipping cost, thanks.
Question By: Pepe on Mar 11 2012 12:00 AM
We ship daily UPS and USPS. Most orders over $98 in the US get free shipping
Answer By: Willys Tech on Mar 12 2012 12:00 AM
Questions: The leaf spring shackles appear to be threaded on outside, does that mean that the inside of the leaf spring where the shackle goes through is threaded also?
Question By: Anonymous on Jan 6 2012 12:00 AM
The shackle actually bites into the metal so people often think the springs are actually threaded.
Answer By: Willys Tech on Jan 9 2012 12:00 AM
Questions: Do i need to buy 4 total items for both side leaf springs or does this one item come with both front and rear driver side shackle assemblies.
Question By: Jason on Nov 20 2011 12:00 AM
These are each. You will need 4 total shackles to do the whole Willys Jeep.
Answer By: Willys Tech on Nov 21 2011 12:00 AM
Questions: On the front drivers side. I have not removed the shackle yet, but, it appears the round tubing which is welded into the frame for the upper part of the shackle to go through is wallered out. Is that part available?
Question By: Rick on Feb 2 2011 12:00 AM
Yes, it is part number: A544
Answer By: Willys Tech on Feb 2 2011 12:00 AM