Questions & Answers
Questions: have same ? as others .fitting that was removed is single port ... one shipped to me is dual port. whats the fix on this?
Question By: peter rania on Sep 30 2020 3:39 PM
Please email mike@Kaiserwillys.com some more vehicle information and we can help out. Thanks!
Answer By: Willys Jeep Parts Tech on Sep 30 2020 9:49 AM
Questions: I have a 63 cj5 and this fitting on my jeep only has one port. Do you sell them or do I use the dual port and plug one. If so do you sell the plug too?
Question By: William P Sterbenz on Nov 5 2019 10:30 PM
The single port fittings you have to reuse your old one.
Answer By: Willys Jeep Parts Tech on Nov 6 2019 6:48 AM
Questions: I’m installing a new master cylinder and want to replace this fitting but mine only has one port. Do you sell those? Would I need to use this and plug one of the ports?
Question By: Matt Good on Nov 4 2018 1:37 PM
Please email firstname.lastname@example.org more vehicle info and we can help out. Thanks!
Answer By: Willys Jeep Parts Tech on Nov 5 2018 11:48 AM
Questions: My brass fitting looks the same but has threads to screw in Master cylinder Can’t tighten anymore is this the correct fitting? 1964 M38A1
Question By: Kevin on Oct 23 2018 11:29 AM
637605 is the outlet bolt that has the threads for it to screw into the master cylinder.
Answer By: Willys Jeep Parts Tech on Oct 23 2018 5:44 AM
Questions: The brass fitting on my '61 CJ-3B only has one port. The front/rear splitting T is elsewhere. Can I get the single port T or should I buy the dual port and re-run the steel lines?
Question By: ellis Johnson on Nov 15 2017 8:07 PM
That was used on later CJ-3B's. We can help you get a good used junction if you like. Please call and ask for Mike M.
Answer By: Willys Jeep Parts Tech on Nov 16 2017 5:50 AM
Questions: Will the outlet ports on this fitting match up with the 3/16" inverted flare fitting on a brake line?
Question By: Noel Moss on Mar 13 2017 4:14 PM
Yes, both are 3/16" like original.
Answer By: Willys Jeep Parts Tech on Mar 13 2017 9:27 AM
Questions: When replacing the fitting which way do you put the small/large openings? Does the large opening go to front or back brakes? small opening front or back brakes?
Question By: July M. on Nov 5 2014 12:00 AM
This is not the proper fitting for your Willys Truck. You want part number 637603 which has the two different sized ports.
Answer By: Willys Tech on Nov 5 2014 12:00 AM
Questions: Do I need to order two of this fittings or it comes with both?
Question By: Anonymous on Jun 25 2011 12:00 AM
There is only on the vehicle. Just qyt one.
Answer By: Willys Tech on Jun 27 2011 12:00 AM
Questions: how much is shipping on this fitting?
Question By: Anonymous on May 14 2011 12:00 AM
It this is all you need we can ship it out via USPS priority Mail for $6.99
Answer By: Willys Tech on May 15 2011 12:00 AM