Questions & Answers
Does this fit a 1949 Jeepster? If not, does anyone make one that fits?
Willys Jeep Parts Tech:
No sorry, But we do have complete carpeting sets for you.
No sorry, But we do have complete carpeting sets for you.
I have a 1958 Willy's Panel Wagon. Will this floor mat fit?
Willys Jeep Parts Tech:
Yes, it will have cut out for floor shift.
Yes, it will have cut out for floor shift.
I have a 1962 Willy's Station Wagon wondering how thick the rubber is and if the padding is big enough for the whole floor including the side along the seat and door area.
Willys Jeep Parts Tech:
These are a heavy duty rubber and go back to tool bin and down sides of door too. See multiple photos we have posted.
These are a heavy duty rubber and go back to tool bin and down sides of door too. See multiple photos we have posted.
Will this mat work for modified now automatic transmission 1955 truck or are there pre-cut PTO, 4X4/gear levers & clutch pedal holes?
Willys Jeep Parts Tech:
I would not be able to confirm if it would fit or not. But the holes have to be cut either way.
I would not be able to confirm if it would fit or not. But the holes have to be cut either way.
Can you freight the floor mat without the insulation.
Willys Jeep Parts Tech:
Sorry, they only come complete.
Sorry, they only come complete.
Is there a video on how to install this floor mat?
Willys Jeep Parts Tech:
No, we haven't made one yet. These should just la in place on the floor. Thanks
No, we haven't made one yet. These should just la in place on the floor. Thanks
Will this mat fit a 1947 ? Other vendors say NO
Willys Jeep Parts Tech:
They will be a bit baggy over the tunnel.
They will be a bit baggy over the tunnel.
Does this mat come with the insulation/sound pad under it?
Willys Jeep Parts Tech:
It does come with the insulation padding on the bottom that you must be cut to fit before installing the mat. Thanks
It does come with the insulation padding on the bottom that you must be cut to fit before installing the mat. Thanks
do you have carpet kits for a 1959 willys pick-up truck
Willys Jeep Parts Tech:
Unfortunately we do not. This floor mat is the only thing available. Thanks
Unfortunately we do not. This floor mat is the only thing available. Thanks
Do you floor covering for 1949 Jeepster?
Willys Jeep Parts Tech:
We can carpeting sets and can send you samples. Please call us toll free and we can go over.
We can carpeting sets and can send you samples. Please call us toll free and we can go over.
Does this mat fit the 1952 CJ-3A ?
Willys Jeep Parts Tech:
No, it does not. For the front mat, try number 554995. And for the rear, try number 550995. Thanks!!
No, it does not. For the front mat, try number 554995. And for the rear, try number 550995. Thanks!!
1961 Willy's Station 4X4 with PTO.... does the mat have a cut-out for that?
Willys Jeep Parts Tech:
No, you have to cut that out on your end for the PTO.
No, you have to cut that out on your end for the PTO.
Will this front floor mat fit a 1948 Willys Jeepster (VJ) , Item # 818265?
Willys Jeep Parts Tech:
These really are only for the Willys truck and station wagon. We do have carpet kits available for the Jeepster.
These really are only for the Willys truck and station wagon. We do have carpet kits available for the Jeepster.
I have 49 Willys tail lights. The pins have to be straight across from each other, not staggered. I can't tell from the picture. Is this the right bulb for me?
Willys Jeep Parts Tech:
Yes, this is the correct dual filament bulb. Thanks
Yes, this is the correct dual filament bulb. Thanks
I've already installed lots of dynamat padding..is it possible to buy the rubber mat without the padding shown?
Willys Jeep Parts Tech:
No, I'm sorry but the floor mats are only sold with the padding. Thanks
No, I'm sorry but the floor mats are only sold with the padding. Thanks
I would like to buy this specific kind of rubber matting but not cut or molded. Can u just sell the rubber by the yard or tell me where it can be purchased?
Willys Tech:
Sorry these are moulded at the factory. I really don't have a source.
Sorry these are moulded at the factory. I really don't have a source.
I am looking for some reproductions of floormats for a 1960 Jeep Station Wagon. L-226 AWD. I have new floorboards and need 2 masonite side panels as well. Do you have any of these 3 items in stock?
Willys Tech:
These are the floor mats for the Willys Station Wagon. The side panels I would have a local apolstry shop make for you.
These are the floor mats for the Willys Station Wagon. The side panels I would have a local apolstry shop make for you.
I have a '59 wagon, so when you say in your listing that Some trimming required for proper fit, is that primarily for the model years 1953 and back?
Willys Tech:
Just some minor trimming around the edges.
Just some minor trimming around the edges.
does the mat have logo imprinted on it like the original one
Willys Tech:
No they are not made with the stamping.
No they are not made with the stamping.
I have a 49 willys pickup with two wheel drive with the shifter on the floor (no 4x4 levers) Can I have a mat made like this Also, what colors were the truck engines (L head 4 cylinder ) thanks
Willys Tech:
That is going to be tough. They only make them like the one above for the 4WD vehicles. The engines were originally black.
That is going to be tough. They only make them like the one above for the 4WD vehicles. The engines were originally black.
Thanks The L head engines were black What color were the external parts ? Oil filter, etc thanks
Willys Tech:
Most everything was black but the filters were orange on the bottom with black cap.
Most everything was black but the filters were orange on the bottom with black cap.
Do you carry the door thresholds that hold down the mats?
Willys Tech:
No, you have to make some. We are working on having them made now.
No, you have to make some. We are working on having them made now.
Does floor mat have 'bump' for overdrive cover? (1949 Jeepster)
Willys Tech:
This will be baggy for the early jeepster. I dont believe so. They fit best for 54-64 Truck/Station Wagon.
This will be baggy for the early jeepster. I dont believe so. They fit best for 54-64 Truck/Station Wagon.
Hi Guys, is there any chance of getting a rubber mat for a Willys truck WITHOUT the holes, on account of it being right hand drive. Thanks
Willys Tech:
Yes, but they will still be perferated but not completly cut out.
Yes, but they will still be perferated but not completly cut out.
YOU MIGHT ALSO BE INTERESTED IN
