Product Videos
Questions & Answers
Sort By:
Questions: Does this starter make use of the bushing that is in the transmission bell housing? If so, do I have to change it? If I have to change the bushing, is it included with the new starter?
Question By: Richard O Horth on Sep 8 2021 1:36 AM
No, these do not use the bushing.
Answer By: Willys Jeep Parts Tech on Sep 8 2021 6:39 AM
Questions: does this starter have the same points of attachment as the original starter? or will modifications of some sort have to be made? I have a 42 Ford Willys GPW engine this is attaching to.
Question By: LUCAS S. on Feb 23 2021 6:48 PM
Yes, it bolts up like original and see link in item description for wiring instructions. Thanks!
Answer By: Willys Jeep Parts Tech on Feb 23 2021 11:27 AM
Questions: I have a 51 truck but the numbers on the starter match with this one. Not sure if this would be the correct starter or not.
Question By: Gene miller on Feb 5 2019 12:08 AM
Call me toll free. I can help you out and ID what you have and need.
Answer By: Willys Jeep Parts Tech on Feb 5 2019 6:03 AM
Questions: Hi,i have a french military jeep Hotchkiss 1964,12 volts,does your starter work on it?
thanks
Question By: Christophe on Jan 21 2019 8:11 PM
Please email mike@kaiserwillys.com your starter motor numbers and we can try to match up for you. Thanks!
Answer By: Willys Jeep Parts Tech on Jan 22 2019 6:04 AM
Questions: I just installed this starter on my 46' CJ2A. When I try to crank it grinds like an un-experienced welder. Is there a recommended shim for this starter?
Thanks
Question By: Sean Thellen on Oct 25 2016 11:56 AM
You shouldn't grind so you may not have the proper flywheel ring gear in your vehicle at 97 teeth or its worn. Please call us toll free and we can help.
Answer By: Willys Jeep Parts Tech on Oct 25 2016 6:15 AM
Questions: How much does a 1947 Agri CJ-2A weigh. And will it fit onto a 5 X 10 ft. trailer?
Question By: D-Bell on Jun 10 2015 12:00 AM
They are approx. 1/4 ton vehicles. Approx. length 123 width 59
Answer By: Willys Tech on Jun 11 2015 12:00 AM
Questions: Is that Bendix gear 1 1/2 like needed on mz-4113 starter?
Question By: Ronald Hoehn on Dec 27 2014 12:00 AM
This is the proper bendix for the MZ-4113 starter.
Answer By: Willys Tech on Dec 29 2014 12:00 AM
Questions: Will the 12v starter #A1245-12V work on a 4-134 F engine which replaced a flathead?
Question By: Lane on Sep 22 2014 12:00 AM
Only if you are using the original 97 tooth flywheel and bellhousing.
Answer By: Willys Tech on Sep 22 2014 12:00 AM
Questions: How do I tell if I have a MB or a GPW its either a 1941 or 1943. Will the A1245-12V starter work on a 4-134F the original engine was 4 cyl flathead?
Question By: Lane on Sep 22 2014 12:00 AM
If its a GPW you will have a small 'f' script on the drivers side fender also on the frame as well.
Answer By: Willys Tech on Sep 22 2014 12:00 AM
Questions: How many teeth are there on the gear? Is it 9 or 10? Thanks.
Question By: Tony on Jun 30 2014 12:00 AM
9 tooth
Answer By: Willys Tech on Jul 1 2014 12:00 AM
Questions: We have a 1947 Willys CJ2A; the only visible numbers on the existing starter is as follows: PS79 48 tm (Trade Mark)...
Question By: Anonymous on Jan 1 1970 12:00 AM
That is a MZ4113 starter and will be correct.
Answer By: Willys Tech on Nov 5 2012 12:00 AM
Questions: we require a HI TORQUE 12 VOLT STARTER MOTORS ($299.29 price) free shiping. Is posible to send it by USPS TO MEXICO TO MEXICAN POSTAL OFFICE, IN VALLE DE MEXICO, EDO. DE MEXICO CP 51200 and how can be especificate in the purchase order form.
Question By: Carlos Miguel Gutierrez Colsa on Oct 4 2012 12:00 AM
We ship daily UPS and USPS international. We are more than happy to help.
Answer By: Willys Tech on Oct 5 2012 12:00 AM
Questions: I have 1955, M38A1 Jeep that was partially converted by a fire dept to a 12 volt ignition system, to include an alternator. The starter is sill on a 24 volt system. I would like to replce the original starter with a 12 volt as well, for ease of use. It takes three batteries to make this system work. One would be much better. Do you have such a starter?
Question By: Terry on Apr 6 2012 12:00 AM
If you are running 12 volt we can help. Please call us toll free. We have one for you.
Answer By: Willys Tech on Apr 6 2012 12:00 AM
Questions: Is the 1950 Jeepster positive or negative ground?
Question By: Anonymous on Dec 17 2011 12:00 AM
All Willys are negative ground.
Answer By: Willys Tech on Dec 19 2011 12:00 AM
Questions: Will this starter work with my stock 6volt system on my cj2a thanks
Question By: Joe on Jun 22 2011 12:00 AM
This is for 12volt only. We have options for you. Please call us toll free. We are more than happy to help out.
Answer By: Willys Tech on Jun 23 2011 12:00 AM
Questions: Will this work with the floor mounted starter switch? Is there a 12v starter that will?
Question By: Missy on Mar 30 2011 12:00 AM
Yes, can be used with a floor switch if you like.
Answer By: Willys Tech on Mar 31 2011 12:00 AM
Questions: how does one know if they have the correct# of teeth on the flywheel for this starter?.....by checking # on orig.or???? thanks.
Question By: Anonymous on Mar 8 2011 12:00 AM
You should have 97 teeth on your flyweel.
Answer By: Willys Tech on Mar 8 2011 12:00 AM
You Might Also Be Interested In
Weekly Willys highlights and discounts sent to your inbox
