Product Videos
Questions & Answers
Sort By:
Questions: I purchased two of these fittings and a new oil filter canister but the fittings will only screw into the canister about 3/4 of a turn before they get really tight. It appears that the female fittings welded to the canister are not correct. Any suggestions?
Question By: Fittings won’t mate to canister properly on Jul 11 2018 8:31 AM
Make sure any paint is out of canister. It should be tight fitment to seal.
Answer By: Willys Jeep Parts Tech on Jul 11 2018 5:50 AM
Questions: "I need two of these fittings. The one is a straight one and the other one is a 90 degree one. The end that screw in the block or the canister is a 1/8" PSP male and the other end should connect to the rubber oil hoses.
Can i get the part numbers to ad them to my list.
Question By: KLASIE BREYTENBACH on Feb 6 2017 7:06 PM
We do have some 90 degree fittings. Try part number: A215
Answer By: Willys Jeep Parts Tech on Feb 6 2017 11:53 AM
Questions: On a 47 CJ2A, it looks like the fittings on the oil filter housing should be 90 degree so they point in the right direction for the hoses. Are they supposed to be straight? Do you sell 90 degree ones that would work here with your hoses?
Question By: Mitch Peters on May 24 2016 2:15 PM
The fitting on the block for the inlet should be a 90 degree. On the canister it should be 2 straight fittings for inlet/outlet.
Answer By: Willys Tech on May 24 2016 7:31 AM
You Might Also Be Interested In
Weekly Willys highlights and discounts sent to your inbox
