Questions & Answers
Questions: Will this tank fit a willys pickup ? What are the measures of it?
Question By: Manuel on Nov 7 2020 12:19 PM
The correct tank for the Truck is - MTS-0010. Thanks
Answer By: Willys Jeep Parts Tech on Nov 9 2020 3:53 AM
Questions: What is the fuel quantity?
Question By: Wayne Pierce on Aug 11 2020 12:38 AM
Answer By: Willys Jeep Parts Tech on Aug 11 2020 5:44 AM
Questions: is the fille rleft or right side
Question By: roland grannan on May 6 2020 8:18 PM
Passenger side like original.
Answer By: Willys Jeep Parts Tech on May 6 2020 1:47 PM
Questions: 1959 L-226. Do you offer a Skid Plate for this Poly Gas tank? Is there even supposed to be a skid plate for the gas tank on this PU Truck?
Question By: Craig on Dec 18 2019 11:16 PM
No, they originally didnt use a skid plate.
Answer By: Willys Jeep Parts Tech on Dec 19 2019 5:31 AM
Questions: My original tank has a drain bolt in the bottom center. Does this tank had that too?
Question By: Craig on Dec 18 2019 9:46 PM
No, these will not have a drain hole.
Answer By: Willys Jeep Parts Tech on Dec 19 2019 5:32 AM
Questions: Is the mounting bracketry that is shown in the pics included with the tank?
Question By: Nathan Schuit on Feb 15 2019 10:57 PM
It does come with the hold down straps. Thanks
Answer By: Willys Jeep Parts Tech on Feb 18 2019 5:20 AM
Questions: I have a '53 Wagon. The tank is fine except for some rust I need to take care of, just need sending unit. Mine looks different, the sending unit centered on the rear of the tank and is held on by a bracket that twist on. The fuel pick up tube and sending unit is one. Do you think the wrong tank is on the Wagon?
Question By: Dean on May 22 2014 12:00 AM
That is an original tank most likely in your station wagon. They all were 6 hole sending units.
Answer By: Willys Tech on May 27 2014 12:00 AM
Questions: Does this tank fit a 1957 model 6-226 station wagon ? Is it copied after the original tank ? Will I need sending unit ? What else will I need ?
Question By: Anonymous on Jan 3 2014 12:00 AM
Yes this is the proper gas tank for the Willys Station Wagon. The sending unit is part number: 914848
Answer By: Willys Tech on Jan 3 2014 12:00 AM
Questions: Is there a new filler neck that i can get to go with this?
Question By: Justin on Nov 5 2013 12:00 AM
We sell the filler hose part number: 200462. The steel filler neck is available good used only.
Answer By: Willys Tech on Nov 6 2013 12:00 AM
Questions: I have a '55 Willys Pickup and would like to have more fuel capacity. Would it be possible to use this wagon fuel tank mounted next to the original smaller pickup tank? It it would fit, it looks like I would just need to cut a hole for the inlet spout. Your thoughts on this would be much appreciated. Thanks. Jim
Question By: Jim Mller on Jul 9 2013 12:00 AM
I really dont think there is room for it. Im sure it could be done though with some modifcation...
Answer By: Willys Tech on Jul 9 2013 12:00 AM
Questions: I have a 59 Willys wagon with dual tanks, Are the part numbers the same?
Question By: Michael on Jun 21 2013 12:00 AM
If you have dual tanks then it is unoriginal.
Answer By: Willys Tech on Jun 21 2013 12:00 AM
Questions: How many gallons is this tank?
Question By: mike on Jan 29 2013 12:00 AM
It is a 17 gallon tank like original but has a 13 gallon liquid capacity due to side filler neck like original.
Answer By: Willys Tech on Jan 29 2013 12:00 AM
Questions: Will this tank fit a 1963 Willys Wagoneer?
Question By: Jason on Nov 21 2012 12:00 AM
This is for the 1946-1964 Willys Station Wagon only.
Answer By: Willys Tech on Nov 21 2012 12:00 AM
Questions: Does this tank have a fuel pickup line installed?
Question By: Jim on Jun 25 2012 12:00 AM
Yes that is correct.
Answer By: Willys Tech on Jun 26 2012 12:00 AM
Questions: I would like to put this tank on my 56 w.pu. for larger capacity. can you tell where the filler tube is on the actual tank.
Question By: jeff on Feb 6 2012 12:00 AM
The picture is acurate so it may work with modification.
Answer By: Willys Tech on Feb 7 2012 12:00 AM
Questions: I have a 1949 willys overland 2x4 wagon and need a fuel tank. Does item #mts-0018 fit that? The picture doesn't show the long filler neck that comes off of the tank, is that a separate purchase? Do you recommend a new sending unit? I have the one from the old tank.
Question By: Bob on Nov 10 2011 12:00 AM
Yes this is the correct one for your Willys Station Wagon. The filler hose is part number: 200462. We also have the sending unit part number: 914848 if you need a new one.
Answer By: Willys Tech on Nov 11 2011 12:00 AM
Questions: I assume that the plastic replacement fuel tank (which fits a 1946 - 1964 Station Wagon), comes with the fuel line in the tank (which connects to the fuel line going to the engine fuel pump), already installed in the tank. Is this correct?
Question By: Claude on Sep 18 2011 12:00 AM
Yes that is correct.
Answer By: Willys Tech on Sep 19 2011 12:00 AM
Questions: How many gallons and does the advertised sending unit fit the stock tank? Is the plastic tank as durable as the stock tank and last but not least, are the tank and the sending unit a package?
Question By: Bob on Aug 13 2011 12:00 AM
These are the factory capacity. It is a very high quality poly tank and US made. This is for the tank only. We also have the sending unit grommet ect ect...
Answer By: Willys Tech on Aug 15 2011 12:00 AM
Questions: What are the dimensions?
Question By: Anonymous on Dec 1 2010 12:00 AM
They are roughly 10x20x30 just like original.
Answer By: Willys Tech on Dec 1 2010 12:00 AM
Questions: What are the dimensions?
Question By: Anonymous on Nov 29 2010 12:00 AM
They are just like original for the Station Wagon.
Answer By: Willys Tech on Nov 29 2010 12:00 AM