Save 10% Off All Suspension Parts. HHAID10

FREE SHIPPING on all orders $98+ See Details

Select Your Currency
Close
  • Africa
  • Americas
  • Asia
  • Europe
  • Oceania
Shop Kaiser Willys

New Hi-Torque Starter Motor 12 volt
Fits 49-53 CJ-3A

Part # 641157-12V

New Hi-Torque Starter Motor in 12volt

Mini High Torque Starter To Replace  Early
Autolite Starter.

This is a Denso Gear Reduction Conversion Starter
made from the Powerful 1.2 KW Nippondenso
Gear Reduction Starter Motors.

Looking for a Trouble Free Starter to Crank
That Willys Engine? Try This 12 Volt
Starter Made in the USA. You Will Not Be
Disappointed!

For Autolite MZ-4137

Measurements:
Center Hole (register): 3-1/8"
Hole to Hole (mounting hole):  4.55"
124 Tooth Ring Gear

Application:
4-134 L engine

Fits:
49-53 CJ-3A

Note:
Please confirm your starter motor number before ordering. Call if you need help. For us with key or push button switch..

Helpful Guides and Illustrations:
Wiring and Installation Guide

Part # Price
641157-12V

$379.99

MSRP:

$379.99

MSRP:

1 Item has been added to your cart!
Close

Product Videos

Questions & Answers

Please Wait...

Ask Question Add Answer

All questions will be displayed after moderation. All answers will be displayed after moderation.

I have a 1947 CJ2A it has 9 tooth bendix and it has stamped 015011-53002S 12V 1.0Kw Is this the right one for a replacement ? Thank you

Willys Jeep Parts Tech:
Please email mike@Kaiserwillys.com your starter motor numbers. On a CJ-2A you should have a MZ-4113 starter. The 3A used a MZ-4137 starter. We can help.

My starter just has casting #PS79 A With a 10 tooth gear Is this the right one for a replacement?

Willys Jeep Parts Tech:
yes, that is correct PS79 is the MZ4113 starter.

Hi does this starter motor comes with a built in selenoid? Thank you

Willys Jeep Parts Tech:
Yes it does.

Will this starter work with the foot switch?

Willys Jeep Parts Tech:
Yes, you could wire in thru the foot switch.

Just had to replace my Denso starter (thanks for getting it to my mechanic quickly). Can you recommend anyone to repair the old one for potential future use? Thanks, Steve

Willys Jeep Parts Tech:
Please email mike@kaiserwillys.com about what you have there and we can help.

I have a 1952 CJ3A. it has a 124 tooth flywheel and a 8.5" clutch. The jeep has an F-head from an unknown CJ5. My flywheel and starter stripped. I don't know if it was from use/age or improper starter-flywheel combo. The starter I have is a 9 tooth bendix with PS256 stamped into starter housing. I do not have any starter id tags. I want a gear reduction 12v starter for this project. What do I need? Was this starter originally for a CJ3A or CJ5?

Willys Tech:
Please call us toll free. We will ask some questions and get some measurements from you and we can get you set up.

We have a 1951 Willys Jeep CJ-3A, it has a 1951 M38 F series motor. We bought a starter for it but the inner flange is 1/8 too large and .060 to thick, what starter do we need?

Willys Tech:
Because you have a mix 'n match vehicle we will need to get your old starter motor number and match them for you. Please call us toll free. We are happy to help.

Will this starter work with a 129 tooth flywheel ?

Willys Tech:
The CJ-3A originally had a 124 tooth flywheel. Make sure when matching the hi-torque starter you match to the original starter in the item description.

cj-3a 134 L, conversion from 6, to 12 volt.Has off/on switch, Push linkage on floor. Will I have to hook this starter to a button.

Willys Tech:
Typically you wire it up thru the ignition. See install instructions above.

I have a 1949 CJ3A with a 97 tooth ring gear flywheel on it ,will this starter work for me that I can bolt it right on ?

Willys Tech:
The CJ-3A should have a 124 tooth flywheel. Please call us toll free with your starter motor in hand and we can help you ID what you need. Thanks!

How can I convert the foot starter on a 1952 CJ3A to a push button? My legs are not long enough to reach the foot starter.

Willys Tech:
If you are 12 volt system this starter motor will do the trick.

Do I need to change / worry about my bellhousing starter bushing if I upgrade to one of these

Willys Tech:
No you do not have to worry about that.

how do you wire this starter

Willys Tech:
Please call us toll free. We can email or fax you over instructions. We are working on posting them to the site now too.

Do you have pinion repair parts for this starter?

Willys Tech:
Yes we always can get parts for these.

do i still need a seperate solenoid?

Willys Tech:
No you dont.

I have a 1950 CJ3A with the MZ-4162 starter. Part # 641157-12V says for MZ -4137. Will this part work?

Willys Tech:
Yes this is the correct one for you.

I am converting my 1952 Willys M38 to 12 volt. Will this starter work for that application?

Willys Tech:
You want to order part number: 925520-12V for your M38 or M38A1 in 12volt.

I have a 1951 Cj3a with a push to start pedal that engages the starter. The starter drags. Any suggestions at to what I need. Is there a replacement starter should this one not be rebuilt.

Willys Tech:
This starter motor solves that problem and is a direct bolt in. It does away with the mechanical linkage.

I need to know the weight of this starter motor?

Willys Tech:
They are approx 10 pounds.
Request Catalog
X
THANK YOU! Your catalog request has been submitted successfully. Please note:

If your catalog does not arrive within 7-10 business days, call us Toll-Free at (888) 648-4923.

Email Subscription
X
THANK YOU! You have successfully subscribed to our newsletter.
Contact Form
X
THANK YOU! Your contact form request has been submitted successfully.
Photo Contest
X
SUCCESS! Your photo contest entry has been submitted!
Browser warning
The browser you are using to visit our website is no longer supported. For the best browsing experience, please visit us using a different browser.
I understand, close this message