Replacement Park & Turn Signal Lamp Assembly (clear lens)
Fits 53-71 CJ-3B, 5
New Replacement Parking and Turn Signal Lamp Assembly with Clear Lens
Comes complete with pigtail wiring for turn signals. Provides an easy fix for cracked, melted, discolored, miswired parking light assemblies.
Measurements:
2-1/4" center to center
2 required per vehicle.
Fits:
53-64 CJ-3B
55-71 CJ-5
Note:
Can also fit early model Jeeps with some modification of mounting.
Assembly grounds through the housing. There is a hi and low part of the bulb in relation to the wires.
Red is park and black is turn.
| Part # | Price |
|---|---|
| 938897-CL | $42.99 MSRP: $42.99 |
$42.99
MSRP: $42.99
Product Videos
Questions & Answers
I have a 65 CJ5 I am assuming the red wire is parking and connects to the yellow wire in the harness and black. Is for turn signal
Willys Jeep Parts Tech:
It should ground thru the housing. There is a hi and low part of the bulb in relation to the wires. Red is park and Black is turn.
It should ground thru the housing. There is a hi and low part of the bulb in relation to the wires. Red is park and Black is turn.
Hi! I saw this part has a plastic lens, did the OEM came with plastic or glass lenses?
Willys Jeep Parts Tech:
See part number: 916890 for a glass lens.
See part number: 916890 for a glass lens.
What is the size of this item
Willys Jeep Parts Tech:
Give us a call so we can figure out what sort of measurements you are wanting to know.
Give us a call so we can figure out what sort of measurements you are wanting to know.
Will this fit my 1956 Willys Wagon?
Willys Jeep Parts Tech:
With some modification yes.
With some modification yes.
Will these work with a 6V system? Thank you.
Willys Jeep Parts Tech:
These are 12 volt but you could possibly swap the bulbs for 6 volt ones.
These are 12 volt but you could possibly swap the bulbs for 6 volt ones.
53 Willys Pickup , these will fit my pickup and can use the old glass lenses ? lense size?
Willys Jeep Parts Tech:
They are not original but I'm sure you could make them work with some modifying. Thanks
They are not original but I'm sure you could make them work with some modifying. Thanks
Are these clear lenses glass or plastic? Do you include both the amber and clear lenses? Is this why these cost more than part #938897?
Willys Jeep Parts Tech:
These are plastic lenses. This includes both.
These are plastic lenses. This includes both.
Are they in glass or plastic?
Willys Jeep Parts Tech:
These are plastic.
These are plastic.
Can I use these to replace my turn signals on my '62 Willys pickup? I am actually looking to only replace the pigtails and sockets and keep the original glass and trim rings but cannot find those parts on your site...(the pigtails and sockets) thanks, Rich
Willys Jeep Parts Tech:
Yes, these will mount flush to the outside of your grille.
Yes, these will mount flush to the outside of your grille.
hey, I want to install park/signal lights on my 52 M38. is this the light I want ? I'm not sure why, but I think I want a clear lense with an amber bulb. thoughts ?
Willys Tech:
Im sure these could be make to work. We also sell part number: 2A0604-DF
Im sure these could be make to work. We also sell part number: 2A0604-DF
Is this for one assembly or two?
Willys Tech:
These are sold each.
These are sold each.
Just making sure this will fit before I order. I have a 1963 jeep willys and need both turn signal assemblys. The hole for my turn signal is 1 1/2 inch diameter. Should this one fit it?
Willys Tech:
They mount on studs 2-1/8 center to center.
They mount on studs 2-1/8 center to center.
Will this light fit a 57 Jeep FC-150
Willys Tech:
Im sure it could be with modification.
Im sure it could be with modification.
how is this light mounted.
Willys Tech:
It has a two stud mounting.
It has a two stud mounting.
What is the distance between the mounting posts on the back of this light assembly?
Willys Tech:
These are 2-1/4 center to center on the mounting studs.
These are 2-1/4 center to center on the mounting studs.
YOU MIGHT ALSO BE INTERESTED IN
