Product Videos
Questions & Answers
Morning. I bought the solid state distributor and these plugs. I'm running an F134 on a '65 CJ5. FSM says 0.030 for plug gap, but I'm reading in these Q&A that 0.020 gap is for my engine and this distributor. Which one is correct?
Willys Jeep Parts Tech:
.020 on the gap for the distributor. .030 for the gap on the points. Please give us a call if you are still confused.
.020 on the gap for the distributor. .030 for the gap on the points. Please give us a call if you are still confused.
The spark plug wires 930456 are radio suppressed, right? Mine are so noisy I can't use the radio/tape player. The spark plugs 804492 are the same?
Willys Jeep Parts Tech:
You have other issues going on. Give us a call and ask for Mike M.
You have other issues going on. Give us a call and ask for Mike M.
I have CJ2A that the spark plugs have reddish color on the electrodes. What causes this? I have never seen this before.
Willys Jeep Parts Tech:
Sounds like you have corrosion or even bad fuel in the combustion chamber possibly.
Sounds like you have corrosion or even bad fuel in the combustion chamber possibly.
I just purchased an electronic ignition distribuitor 923068 and spark plugs 804492 from you guys. So What is the spark plug gap for a cj-5 1960 with 4F cylinder engine
Willys Jeep Parts Tech:
.020
.020
What is the spark plug gap for a 1946 cj2a
Willys Jeep Parts Tech:
.030"
.030"
Are these pre-gapped? What is the specialty washer?
Willys Tech:
Yes they are. That goes when you screw the plug in.
Yes they are. That goes when you screw the plug in.
What spark plug gap for a 6-226 engine? Would that gap also be for any spark plugs for it too?
Willys Jeep Parts Tech:
.020 on the points and plugs
.020 on the points and plugs
What is the spark plug gap for a CJ2A ,flathead 134 engine 12 volt system?
Willys Jeep Parts Tech:
.030
.030
Which plugs are the recommended plugs to go along with your electronic ignition kit?
Willys Jeep Parts Tech:
These are the plugs we recommend.
These are the plugs we recommend.
Will these work in my 52 M38A? I think it is still 24 Volt? just bought - how can I determine if it is 24 v or if it was reconfigured to 12? This is a project jeep and no battery was in.
Willys Tech:
These are for 6 or 12 volt. If you are 24 volt then you need to use part number: 922727A
These are for 6 or 12 volt. If you are 24 volt then you need to use part number: 922727A
what spark plug and gap do i use in 1962 4cyl. with crown elect. ign.
Willys Tech:
They are already pregapped but its .020 gap.
They are already pregapped but its .020 gap.
Will these work with CJ-2As that have been reconfigured to the 12 volt system?
Willys Tech:
Yes these are the proper ones.
Yes these are the proper ones.
YOU MIGHT ALSO BE INTERESTED IN
