Questions & Answers
Questions: DO YOU HAVE THE BUSHING THAT FITS THIS CROSSMEMBER (PART # 7372507)
Question By: DOUGLAS EDWARDS on May 31 2022 2:37 PM
Answer By: Willys Jeep Parts Tech on May 31 2022 11:24 AM
Questions: Do you have a cross member for a 1961 Willys Wagon with a T-90 transmission and a Dana 18 transfer case?
Question By: Jim Mertz on Jul 6 2021 12:04 AM
We can help you with good used.
Answer By: Willys Jeep Parts Tech on Jul 6 2021 5:37 AM
Questions: Are there replacement bolts that attach the cross-member to the frame?
Question By: George on Nov 2 2020 5:35 AM
Those are a local hardware store item.
Answer By: Willys Jeep Parts Tech on Nov 2 2020 5:37 AM
Questions: it is indicated that the cross-member fits a CJ-6, but only up to 71. Was something different in 1972? That is my year, and this looks "almost" identical. Any help would be appreciated. Thanks.
Question By: steve on Jul 9 2020 10:53 PM
We have not fit this up past 1971 but they probably would work thru 1975.
Answer By: Willys Jeep Parts Tech on Jul 10 2020 5:38 AM
Questions: Does the replacement transmission crossmember need welded on?
Question By: Vickie Day on Nov 7 2018 2:55 AM
You could weld them on. I do believe originally they were bolted / riveted.
Answer By: Willys Jeep Parts Tech on Nov 8 2018 5:36 AM
Questions: I need a transmission crossmember for a 1979 CJ5 , will this one work?
Question By: Anthony P Gibson on Jun 28 2018 2:29 PM
Sorry, i dont have a good listing for that item.
Answer By: Willys Jeep Parts Tech on Jun 29 2018 6:09 AM
Questions: Do you have the early CJ2A cross member? I have an early CJ2A with an MB frame so the the crossmember mounts are just like the MB ones so the crossmember should bolt to the sides of the mounts and to the bottom of the frame.
Question By: Kyle Thomas on Mar 31 2018 3:42 AM
This crossmember - A5127 - is for the MB, GPW. Take a look at it and see if this is what you're looking for. Thanks
Answer By: Willys Jeep Parts Tech on Apr 2 2018 4:54 AM
Questions: Will this fit 64 sw
Question By: Jody wilke on Feb 23 2018 1:08 AM
No, this is only for the CJ's. Give us a call toll free at 888.648.4923 and we can fix you up. Thanks
Answer By: Willys Jeep Parts Tech on Feb 23 2018 5:01 AM
Questions: I need one for a 75 CJ5 Will this work? If no, where can I find one?
Question By: Nick Giragosian on Dec 6 2017 7:52 PM
This is different. Email firstname.lastname@example.org and we can give you some salvage yard numbers.
Answer By: Willys Jeep Parts Tech on Dec 7 2017 5:45 AM
Questions: Why is this crossmember so different compared to the original in a 46 CJ2A, do I need to remove the brackets on both sides of the frame to install?
Question By: Anonymous on Jan 14 2015 12:00 AM
Early CJ-2A's used a little different attachment to the frame. This one will work just fine it just needs to be drilled.
Answer By: Willys Tech on Jan 15 2015 12:00 AM
Questions: Do you have this part for a 1952 Truck
Question By: Douig on Mar 18 2014 12:00 AM
That is available good used only. Please call us toll free.
Answer By: Willys Tech on Mar 19 2014 12:00 AM
Questions: im looking for a diagram for a dana transfer case single shift
Question By: Anonymous on Feb 26 2014 12:00 AM
Please check out our shop by diagram section. We have a D18 transfercase diagram there. Its dual stick but they are basically the same.
Answer By: Willys Tech on Feb 27 2014 12:00 AM
Questions: Will this fit a 45 gpw and does it sit lower. I have a t90 in my gpw and the floor has been cut to make it fit. I am trying to avoid cutting when I replace the floor. If not what are my options.
Question By: Travis on Aug 13 2013 12:00 AM
If you have a T90 then you should be ok. You will have to drill it out though....
Answer By: Willys Tech on Aug 13 2013 12:00 AM
Questions: Do you have a price for a used crossmember for the M38A1 and an part # when I place an order? Kevin
Question By: Anonymous on Jul 19 2012 12:00 AM
We can get you a few different numbers for salvage yards. Please call us toll free.
Answer By: Willys Tech on Jul 20 2012 12:00 AM
Questions: By relocating the frame brackets this crossmember attaches to will this crossmember work for a military jeep that has had the T-84 transmission replaced with a T-90? Thank you.
Question By: David Russell on Jun 29 2012 12:00 AM
Yes that is corect Im sure it can be used. But if you have a MB I would still use part number: A5127.
Answer By: Willys Tech on Jul 2 2012 12:00 AM
Questions: Do you have a transmission cross member for a 1953 Willys truck 4x4. New or used?
Question By: Jerry on Feb 1 2012 12:00 AM
We can get it good used for the Willys Truck. Please call us toll free.
Answer By: Willys Tech on Feb 2 2012 12:00 AM
Questions: I have a 1943 Willys MB with a T-90 transmission. Should I used this Replacement Transmission Support Crossmember or should I use another one designed for my jeep?
Question By: 1943 Willys MB on Jan 10 2012 12:00 AM
That is an unoriginal transmission. I would go with this one and you may have to modify.
Answer By: Willys Tech on Jan 10 2012 12:00 AM
Questions: I'm looking for the transmission mounting bolts with rubber cushions(?) that go with the transmission support crossmember for a 1960 CJ5. Do you have these?
Question By: Anonymous on Sep 24 2011 12:00 AM
I beleive you mean the transmission mount. Its part number: A6156
Answer By: Willys Tech on Sep 26 2011 12:00 AM
Questions: Will this cross member work for 1950 station wagon?
Question By: Chris on Feb 4 2011 12:00 AM
No, but we can get you good used. Please call us toll free.
Answer By: Willys Tech on Feb 4 2011 12:00 AM
Questions: Will this fit 1955-71 CJ5?
Question By: Anonymous on Dec 10 2010 12:00 AM
Yes, this will work for your CJ-5. Thanks
Answer By: Admin on Dec 10 2010 12:00 AM