Questions & Answers
Questions: I have a 2WD 1947 Wagon with planar suspension. It has the original square speedometer dial. Is this cable suitable?
Question By: Anith Suvarna on Jul 16 2022 1:16 AM
Email firstname.lastname@example.org and we can send you a number for a good gauge rebuilder.
Answer By: Willys Jeep Parts Tech on Jul 18 2022 5:47 AM
Questions: Looking for a speedometer or place to rebuild a 1950 Willys truck..
Question By: Jon merchant on Sep 13 2021 7:20 PM
See part number: 914845A
Answer By: Willys Jeep Parts Tech on Sep 13 2021 12:46 PM
Questions: I got a 53 willys pickup truck 4x4 I’m trying to restore to get it back on the road. The original speedometer cable which has a metal case measures at 74 inches and I have bought a 60in while back from another jeep parts carrier and it was too short. Do you guys by chance got a 74 inch cable?
Question By: Kyle on May 27 2021 9:20 PM
Sounds like something is unoriginal on your Willys Truck. Email email@example.com pics of your vehicle and we can help. 60" is correct.
Answer By: Willys Jeep Parts Tech on May 28 2021 5:45 AM
Questions: Will this fit the Dana 20 drive gear. I need to go from a Dana 20 out of a 78 cj5 to the speedometer of a 61 willys pu
Question By: Caleb on Jan 28 2020 2:30 PM
Sorry, I dont believe so, these are only for the Dana 18.
Answer By: Willys Jeep Parts Tech on Jan 28 2020 8:46 AM
Questions: will this work on a 1949 2wd truck
Question By: Paul on Oct 17 2018 11:53 AM
No, sorry, it is for 4WD only.
Answer By: Willys Jeep Parts Tech on Oct 17 2018 5:43 AM
Questions: I wish to use this cable to run an Autometer mechanical speedometer that needs a 5/8" X18 with.104" sq male drive cable to run it. Are these the specs for the head on this cable? Thanks for your help. Rich
Question By: Richard P Howe on Jul 23 2017 11:40 PM
Call us toll free and we can try to help you out on this.
Answer By: Willys Jeep Parts Tech on Jul 24 2017 6:00 AM
Questions: I would like to add a 90 degree adapter off the transfer case so the cable is under less stress. Do you know of a part number of such adapter or at least the thread pitch of the male transfer case hook up and the pitch of the speedometer threads?
Question By: Tim Martin on Nov 29 2016 6:58 PM
Sorry, I don't think this will work due to the length of the inner cable.
Answer By: Willys Jeep Parts Tech on Nov 29 2016 1:35 PM
Questions: Do you know if VDO made the speedometers for a 1948 truck model. VDO is stamped on the back of my speedo unit. Though it could be some other speedo installed. I recently accuired a 1948 Willys Truck. It has a speedometer that looks period right, and of course no cable. Thanks.
Question By: Randy on Sep 5 2014 12:00 AM
Im really not sure if that is a manufacters stamping or not.
Answer By: Willys Tech on Sep 5 2014 12:00 AM
Questions: Our '51 PU has an original BEAM speedometer. Will this cable connect properly to the back of this BEAM unit?
Question By: Bruce Smith on Mar 17 2014 12:00 AM
This is the proper speedometer cable for your vehicle with the original speedo head.
Answer By: Willys Tech on Mar 17 2014 12:00 AM
Questions: Pulled a broken cable from my '49 wagon, 3 spd, 4x4. It measures 76, yours is 60. Is it likely that the one I pulled was not original and the 60 will work? Thanks.
Question By: mick on Jul 8 2012 12:00 AM
Sounds like you have an unoriginal speedometer cable on there. This will be the proper one for these vehicles with original drivetrain.
Answer By: Willys Tech on Jul 9 2012 12:00 AM
Questions: Bought this from you and installed it today. The reading is always 10mph more than what I'm actually going. Any ideas as to why this might be or how I could fix it?
Question By: Nick on Jan 28 2012 12:00 AM
It is due to your tire size. You must have unoriginal tires on there.
Answer By: Willys Tech on Jan 30 2012 12:00 AM
Questions: Will this give a proper reading to a 52 truck with an overdrive installed on it?
Question By: Nick on Jul 29 2011 12:00 AM
Answer By: Willys Tech on Aug 1 2011 12:00 AM