Questions & Answers
Questions: I'm converting my '47 CJ-2A to 12V and using the old 6V Starter. Will this solenoid work?
Question By: Darryl on Oct 18 2017 9:17 PM
You can mount this 12 volt solenoid just about anywhere. Your old 6 volt starter will work for awhile on 12 volt but will eventually burn out. Just dont crank on it too long. Thanks!
Answer By: Willys Jeep Parts Tech on Oct 19 2017 6:59 AM
Questions: will the 91924 starter solenoid work on a 1966 CJ-5 V6?
Question By: pat colletti on Jul 24 2014 12:00 AM
It should. You can also flatten out the brackets if you want to flush mount this anywhere in the engine compartment.
Answer By: Willys Tech on Jul 24 2014 12:00 AM
Questions: My 1947 CJ2A 6v has a starter solenoid mounted on the passenger side firewall. Must not be original because you don't offer a solenoid for that year / vehicle, true? I want to replace it, so which item # do I need to purchase? Thank U
Question By: bill on Jul 10 2013 12:00 AM
If you are 6 volt then you want part number: 120568. You can just flatten the brackets if you want to mount to the firewall.
Answer By: Willys Tech on Jul 10 2013 12:00 AM
Questions: Does this have a bracket to mount on the starter, and does the wire from the ammeter run to the small silver post, and the cable from the battery to one large post and the cable to the starter post run from the other large post?
Question By: Anonymous on Sep 3 2011 12:00 AM
Yes, it has the bracket on it already. The wire to the small silver terminal on the solenoid goes to the start side of the ignition switch.
Answer By: Willys Tech on Sep 6 2011 12:00 AM
Questions: I am adding a keyed switch and solenoid to replace my foot start button in my 46 willys. Will this one work?
Question By: John Hamilton on May 11 2016 10:34 PM
Yes as long as your are 12 volt and I would use ignition switch 924918.
Answer By: Willys Tech on May 12 2016 6:04 AM