Save 15% Off Body. Enter BODY15 Excludes body tubs & tub kits.

FREE SHIPPING on all orders $98+ See Details

Select Your Currency
Close
  • Africa
  • Americas
  • Asia
  • Europe
  • Oceania
Shop Kaiser Willys

New Original Reproduction Steel Civilian Wheel Rim 15"
Fits 41-71 Jeep & Willys

Part # 640900

New Original Reprodcution Civilian Wheel Rim in 15"

New original reproduction 15" x 5 steel rim with a 5.5" bolt pattern with inner and outer safety beads. Proper bolt hole pattern for all 4wd Willys vehicles.

These wheels can be used with or without tubes and can accept a 10-3/16" inside diameter dog dish type hub cap.

Original reproduction of the Motor Wheel Company rim used by Kaiser Willys. Painted in the original Dupont semi-gloss'skywhite' color code.

FREE SHIPPING ON THIS OVERSIZED ITEM

Measures:
5.5" outside to outside rim width
4-1/4" center hole
3-1/8" backspacking

These are the only DOT APPROVED rims available that are like the original. Be wary of cheap imitations others are selling. They are not DOT approved for road use.

Fits:
41-45 MB
41-45 GPW
46-49 CJ-2A
49-53 CJ-3A
53-64 CJ-3B
55-71 CJ-5
50-52 M38
52-66 M38A1
46-64 Truck
46-64 Station Wagon
66-71 Jeepster Commando (C101)

Part # Price
640900

$189.99

MSRP:

$189.99

MSRP:

1 Item has been added to your cart!
Close

Product Videos

Questions & Answers

Please Wait...

Ask Question Add Answer

All questions will be displayed after moderation. All answers will be displayed after moderation.

Would these rims work on a m100 trailer?

Willys Jeep Tech.:
Yes, it should.

Would these fit a 1981 jeep cj5?

Willys Jeep Parts Tech:
As long as the lug pattern is 5x5.5

Do you know if these 15" rims can be used on CJ5 a 1970 CJ5 with bigger 11" brake drums?

Willys Jeep Parts Tech:
Shouldn't have an issue with that.

theese look like 1966-1967 jeepster commando 4x4 rims that may fit cars listed above also .I looked at many old brochures to figure out what theese rims where closest too .

Willys Jeep Parts Tech:
These should work as well for your 4x4 Jeepster.

did they make 3 types of 15" 4x4 rims ?

Willys Jeep Parts Tech:
I am sure there were slight variations but for the most part they were the same. This is an original reproduction.

What size tires fit these rims?

Willys Jeep Parts Tech:
6.00-7.50 x 15" is what typically is used on them.

Do you sell the spacers required for front disc brakes or can you advise what size they need to be?

Willys Jeep Parts Tech:
We have 1" plus spacers but you dont have to have that much. Typically just requires about a 1/2" spacer or so.

Can I get this wheel in black?

Willys Jeep Parts Tech:
You would have to have painted there locally.

Will these fit my 68 wagoneer?

Willys Jeep Parts Tech:
Yes I do believe so since they should have the same bolt pattern.

What is the largest (Tubeless) Tire size that can be used with the 15" rims. I'm current running P235/75 R 15's on my 62 Willys Station Wagon and want to go with a wider tire.

Willys Jeep Parts Tech:
I would not go larger than 7.50. These will fit without rubbing typically.

hi will these fit a cj7 84my with front discs brakes? thx

Willys Jeep Parts Tech:
These would not be for a CJ-7

Will these wheels fit a 1967 cj62a Kaiser Jeep?

Willys Jeep Parts Tech:
Yes that is correct.

See 15" and 16" offered for the same vehicles. What would determine which you would use? Have a 43 GPW. Would like to get back to original. Thanks

Willys Jeep Parts Tech:
On a GPW the 16" is what was original size.

Do you have rin 15 inches x 7 inches wiillys 46?

Willys Jeep Parts Tech:
These would be the correct 15" rims for you vehicle.

Any chance these will fit over the 4 wheel disc brake conversion you sell, without spacers fitted? Or are they the same as the old stock that require spacers. I am hunting like mad for original style rims that will fit without spacers.

Willys Jeep Parts Tech:
You would have to use a spacer for the disc kits.

Can these be run tubeless or only meant for tube type? Thank you

Willys Jeep Parts Tech:
Just depends on the style tire you are going to put on there. Some are tube style tires and some are tubeless style tires. I would confirm with the manufacture of tires you are using.

Are these powder coated?

Willys Jeep Parts Tech:
Yes, that is correct.

hello,, do you have still it?, i need a 1 pc.

Willys Jeep Parts Tech:
We just got them back in stock. Thanks

What is the stock bolt pattern on the 55 pickup

Willys Jeep Parts Tech:
5x5.5

What is the stock rim width for the 15" dia. Jeepster rim?

Willys Jeep Parts Tech:
I believe they had a 5-3/4" bead but will try to confirm.

Do you have a 15" rim for a 48 CJ2A made for a tubeless tire

Willys Jeep Parts Tech:
As of right now the 15" rims are only available good used. Give me a call toll free and I can go over it with you. 888-648-4923. Thanks

Are these available? I am needed another 15" rim to go on my CJ3a as a spare.

Willys Jeep Parts Tech:
I'm sorry but no one is making these new at this time. Give us a call toll free at 888.648.4923 and we go over how to get good used ones. Thanks

Is this the stock replacement wheel for a 1966-72 Jeepster Commando?

Willys Jeep Parts Tech:
Typically they did use a 15" rim on that vehicle.

Which wheels are correct for my base model '74 CJ5? I have three that look like this one and two others that are each different. The three with the "nubs" for hub caps are probably right but I guess I need another?

Willys Jeep Parts Tech:
Call and ask for Mike M. I can try to help you out with what you need.

Is this wheel available? Also the ones I have do not have the 3 bumps for a hub cap and have a G78 15 tire on them will this work as a replacement wheel for what I currently have?

Willys Jeep Parts Tech:
We are out of 15" rims currently. Please call us toll free and we can try to help out with some salvage yards.

Hi, can I use a 235/75/15 tire on this rim? If not, what would be the widest tire you would recommend?

Willys Jeep Parts Tech:
Typically a 7.50' wide rim is the biggest you would want to go.

I have two wheels that are supposed to be for the M38A1 however they do not fit on the front end, but do on the back end. and what about the split rims, were they actually the original rims? I know from personal experience that split rims are a pain in the ass, when taken to a tire shop they groan and have to dig out the cage to protect the worker. have never seen one come apart but old timers say if not done right the damn things will explode and hurt someone

Willys Jeep Parts Tech:
This rim is a 15" and the combat rims are 16". Double check the sizes on your tires and give us a call toll free and we can help you out. 888-648-4923. Thanks

Does a 15" rim measure 16.5" OD? If so, do you have any of item 640900 available? I need two (would buy four if I can trade my two which need sanded and painted), and will need a full set of four clips, plus four hub caps (644365) and four beauty rings (BEAUTY). This is for a 1948 Station Wagon. Thank you, ron

Willys Jeep Parts Tech:
Please call us toll free. We need to ID your vehicle and help you out with compatibility of parts. You can ask for me Mike M.

Can the wheels be ordered in white?

Willys Jeep Parts Tech:
No, I'm sorry but you can paint them. Thanks!

The old tires I have on my 47 CJ2A are 7.00/15's what is the tallest and best suited tire I can put on this rim?

Willys Jeep Parts Tech:
These rims are only available good used. Give us a call toll free and we can go over it. For the tires, this is the biggest one that will fit the 15" rim: https://www.kaiserwillys.com/category/tires-rims/tires/firestone-non-directional-tire-7-00-x-15-round-shoulder-fits-41-71-jeep-willys Thanks!

Can you tell me if this wheel is correct for a 1965 CJ5 Tuxedo park and what the inner diameter of a hubcap that fits this wheel would be? Also, as these are used, do they come sandblasted and primered, or just however they were sourced?

Willys Jeep Parts Tech:
Typically the CJ-5 had 15" rims and these would be correct. Please call us toll free for availability.

My question is does the cap 644365 fit on this wheel

Willys Jeep Parts Tech:
Sorry, those are for 2x4 Willys Jeepster and Willys Station Wagon only.

Do you have five of these available, and what would shipping be to Charlotte, NC (28211)? Thanks!

Willys Jeep parts tech:
They are used only and currently we are out. We do have new 16" part number: 640800 with free shipping.

Is this item currently available? I need one or two to complete a set.

Willys Jeep Parts Tech:
These are available in limited quantities used.

Looking for spare wheel for 1951 Jeepster. Do you have any that would fit that?

Willys Jeep Parts Tech:
That is available good used only. Please call us toll free.

What is the wheel bolt spacing in inches?

Willys Tech:
Rims are 5 x 5.5 like original.

do you have any 15 inch rims available? I need one for a 63 CJ5. I am having the other 3 sandblasted and painted so it doesnt have to be mint.

Willys Tech:
They are only available used currently.

Hello sir, looking for oem 1955 cj5 15 rim. Do you have one of those ? It's not the same as in the pic.

Willys Tech:
They are available used only. Right now we are out of them.

Do you have these in 15 x 8?

Willys Tech:
Sorry those were never used on Willys.

Do you have a 16 wheel that takes the same hubcap? (wheels have 3 bumps, hubcap centers gold and red, as opposed to the later 4 bump wheels whose hubcaps have red and blue centers. I have a '64 CJ5A)

Willys Tech:
Sorry the 16 rims never took hub caps only the dust covers.

Will these fit a 1970 jeepster commando with a V6,3speed manual 4x4

Willys Tech:
Yes as long as you are the 5 x 5.5 pattern which it would be.

Are these wheels correct for a 1953 2wd with planar front end wagon?

Willys Tech:
No, these are for 4WD vehicles only.

Hi, looking for a set of 5 OEM 15X7 jeep rims. Just the stock rim that came on all jeeps from the 50's on. What do you have in stock? Thank you, M

Willys Tech:
Call us for details on this rim and current availability.

Is this rim still available ? Last time I ordered one, it was back-order.

Willys Tech:
They currently are available only in good used. Please call us toll free to check in on current availablity.

Hi, I just pulled the wheels and tires off my 51 CJ-3A. All the wheels are the same but are different widths (by about 1/2 inch or so), and only 2 have the dimples on them. Is this normal or something messed up by the previous owner? Thanks!

Willys Tech:
Sounds like you have mix matched rims. The main thing is to make sure the rear are the same and front are the same.

Is this price for one rim?

Willys Tech:
Yes these are each.

I have a fc 150 . Is this the correct rim for my vehicle ? Is the center hole large enough to fit over the front hub. Believe it to be around 4 1/4 inches? Bolt pattern is 5.5. Thanks

Willys Tech:
It is a 5 x 5.5 pattern. You can also use part number: 640800 for new rims.

I have a 1971 CJ-5, did the jeep originally come with hub caps or were they just steel wheels from the factory?

Willys Tech:
They just had dust covers. Part number: 641920

what is the size of the bolt pattern? Would wheels from a 2000 jeep fit my 1959 pickup

Willys Tech:
They are 5 x 5.5 pattern like original.

What is the bolt pattern to fit a 1951 willys pick-up. I was told 5 and 1/2 inch Is that correct? When i look up rims i see like 5x112.3 or 5x 120.o its hard to geta straight anser from anyone

Willys Tech:
They are 5 x 5.5 pattern

I'm confused, I was just given an original 1950 CJ3A from my uncle and the only choices for rims point to 15 or 16 with a 5x5.5 pattern. The rims on the jeep are 5 lugs and 3.5 ctr to ctr?? I always thought the 5.5 represented the distance, in inches, between the lugs?

Willys Tech:
You are probabaly measuring stud to stud not across. It is how you are measuring yours. All Willys that are 4x4 are 5 x 5.5 like original.

Does this wheel match the 1958 FC-150 OEM style wheels?

Willys Tech:
Yes that is correct.

i have a 1969 Dj, has the big hub and looks like the 5X5.5, turning this into a military style jeep, but i like the plain jane wheels you show, the tires i have now on it are 15X7, whill these tires fit these rims, or do i need new onew?

Willys Tech:
As long as you are 5 x 5.5 these should work great for you.

I have a 1958 4X4 station wagon. I've seen the Willys hupcaps on the rear wheels only (looks good). My wheels are original and will not accept a hupcap. Can I use a set of these on the rear and add hupcaps? If not, do have a wheel that I can put your hupcap on?

Willys Tech:
They never originally used hub caps on 4x4 vehicles. Im sure these could be made to fit. The spring clip is part number: 646871

What is the bolt pattern on these wheels? 5x4.5 or 5x5.5?

Willys Tech:
It is 5 x 5.5 just like original.

Will these fit a 1952 M38? Do these require a tube?

Willys Tech:
Yes these will fit fine. Typically yes.
Request Catalog
X
THANK YOU! Your catalog request has been submitted successfully. Please note:

If your catalog does not arrive within 7-10 business days, call us Toll-Free at (888) 648-4923.

Email Subscription
X
THANK YOU! You have successfully subscribed to our newsletter.
Contact Form
X
THANK YOU! Your contact form request has been submitted successfully.
Photo Contest
X
SUCCESS! Your photo contest entry has been submitted!
Browser warning
The browser you are using to visit our website is no longer supported. For the best browsing experience, please visit us using a different browser.
I understand, close this message