Questions & Answers
Questions: My 1951 m38 willys has a replacement F 134 engine and the factory hood isn't high enough to accomodate the engine. Will the CJ3B engine hood mate with the 1951 m38 frame just below and in front of the cab or is the CJ3B hood too high to line up with the m38 frame or attach to the m38 frame at the rear of the hood?
Question By: Mark Guerry on Feb 1 2020 4:46 PM
That hood really wont mate up due to the cowl height. Alot of people cut holes in their hood to make room for the carb.
Answer By: Willys Jeep Parts Tech on Feb 3 2020 6:52 AM
Questions: Do you know if the word ´´Willys´´, which is stamped on the grille, sides of the hood and the tailgate, is originally in the CJ3B of the same color of the vehicle?
Question By: Ricardo Uzcátegui on Sep 8 2019 3:05 AM
They were typically the same color from the factory. I personally like to 2 tone.
Answer By: Willys Jeep Parts Tech on Sep 9 2019 6:09 AM
Questions: Is this hood DMC681334 , equipped with the hinge attached?
Question By: Simon on Jan 28 2015 12:00 AM
Yes the hoods have the hinges on them.
Answer By: Willys Tech on Jan 29 2015 12:00 AM
Questions: Did the original hoods all have Willys stamped on them? My 53 does not and I'm trying to figure out if it is a replacement or not. Thank you.
Question By: Jerry A on Aug 9 2014 12:00 AM
Yes, the CJ-3B was originally stamped Willys.
Answer By: Willys Tech on Aug 11 2014 12:00 AM
Questions: where do i sell an old hood orig rusty but ok
Question By: Anonymous on Oct 7 2012 12:00 AM
This is your best option. Most used hoods are pretty dinged up and in poor shape. This one is brand new!
Answer By: Willys Tech on Oct 8 2012 12:00 AM
Questions: WHAT IS THE HEIGHT AND LENGTH DIFFERENCE OF THE CJ3A AND CJ3B?
Question By: Robert on May 8 2012 12:00 AM
I dont think there is a length difference but the height difference is a few inches for sure. They went to the 'high hood' to accomodate the overhead valve 'F' head engine.
Answer By: Willys Tech on May 8 2012 12:00 AM