Questions & Answers
Questions: Can you remove the pan without removing the crossmember?
Question By: Kyle on May 21 2022 5:25 AM
Yes, you can.
Answer By: Willys Jeep Parts Tech on May 23 2022 7:06 AM
Questions: what kind of glue to put on gasket for transfer case bottom cover?
Question By: Gilbert Cusworth on Mar 25 2022 10:50 PM
No glue. Permatex gasket sealant.
Answer By: Willys Jeep Parts Tech on Mar 28 2022 5:54 AM
Questions: Is a sealant required for installation of this gasket? And are torque settings the same as for engine oil pan bolts, ie 15 lb-ft?
Question By: David on Jul 19 2021 10:45 PM
Alittle sealant never hurts.
Answer By: Willys Jeep Parts Tech on Jul 20 2021 5:47 AM
Questions: Will this bottom xfer case gasket for the Dana 18 fit the model 20 in a 1974 CJ5?
Question By: Al SOLOMON on Sep 22 2019 4:24 PM
Sorry, the Dana 20 is different i believe.
Answer By: Willys Jeep Parts Tech on Sep 23 2019 5:57 AM
Questions: Do you have to use a sealant in addition to the paper gasket?
Question By: Steve on Sep 5 2018 2:00 AM
You can use permatex as a sealant on this, yes. Thanks
Answer By: Willys Jeep Parts Tech on Sep 5 2018 5:37 AM
Questions: Is this gasket, paper or cork? I heard that an after market pan is available that will not " warp " and can help keep this from leaking. Can you recommend a good silicone gasket adhesive ?
Question By: Larry on Jul 21 2017 2:44 PM
This is a paper gasket like original. Any good automotive sealant will work.
Answer By: Willys Jeep Parts Tech on Jul 21 2017 8:12 AM
Questions: What weight gear oil do you use for the transfer case and rear differentials? A local guy told me to use 85/140 weight oil but that seems really dense. Thanks.
Question By: David on Mar 25 2017 9:03 PM
For the transfer case you should use 90 weight. And for the axles, just heavy duty axle grease should do it. Thanks!
Answer By: Willys Jeep Parts Tech on Mar 26 2017 12:44 PM
Questions: Hello folks I have a 1944 GPW that has not been run in some time. I don't know the service history so I'm changing all fluids before I take it on the road, It looks like I have leaks from the transfer case pan and PTO cover. Can I remove these covers for new gaskets as well as to look at the inside components ? Are these basic repairs that don't compromise any other part etc. Thanks
Question By: Jeffrey on Feb 2 2015 12:00 AM
Yes you can remove the covers and see pretty much everything for inspection. We sell gasket kits as well.
Answer By: Willys Tech on Feb 3 2015 12:00 AM