Product Videos
Questions & Answers
Is this primer selection suitable for a primer before your flat olive drab gallon?
Willys Jeep Parts Tech:
Yes, that is correct.
Yes, that is correct.
How much primer to do a COMPLETE M38A1 frame-off restoration project? Thanks
Willys Jeep Parts Tech:
Two gallons should do it. Thanks
Two gallons should do it. Thanks
Is this product oil or water based?
Willys Jeep Parts Tech:
This is petroleum based.
This is petroleum based.
What kind, and how much thinner for the red oxide primmer?
Willys Jeep Parts Tech:
Thinning paint or primer to 4 parts paint to 1 part thinner. We recommend XYLENE, XYLOL, or SYNTHETIC ENAMEL REDUCER. They can be purchased at your local hardware store, home improvement, automotive paint supplier or Grainger. Thanks
Thinning paint or primer to 4 parts paint to 1 part thinner. We recommend XYLENE, XYLOL, or SYNTHETIC ENAMEL REDUCER. They can be purchased at your local hardware store, home improvement, automotive paint supplier or Grainger. Thanks
Will this work on a pre painted surfaces that's been sanded and prepped to accept primer? Or does it need to be stripped completely?
Willys Jeep Parts Tech:
Yes, it should as long as it clean.
Yes, it should as long as it clean.
do you need to sand this primer and what grit before painting the O D Green?
Willys Jeep Parts Tech:
I would always sand with finishing sand paper before doing paint to remove any imperfections. But from the factory, they never bothered to. Early CJ-2A's werent even primered.
I would always sand with finishing sand paper before doing paint to remove any imperfections. But from the factory, they never bothered to. Early CJ-2A's werent even primered.
how much will it take for the frame? Thank You Bruceter
Willys Jeep Parts Tech:
You should only need one gallon. Thanks
You should only need one gallon. Thanks