Questions & Answers
Questions: where do all the small pcs. go? i dont see a diagram for them?
Question By: eugene martin on Mar 5 2021 5:39 AM
Please email email@example.com and we can help on install.
Answer By: Willys Jeep Parts Tech on Mar 5 2021 6:43 AM
Questions: since there is an on/off switch on the body or the wiper, why do we need a second on off switch? thanks in advance.
Question By: eugene martin on Mar 5 2021 5:26 AM
They provide it as extra. Typically most people just turn off and on right on the vehicle itself.
Answer By: Willys Jeep Parts Tech on Mar 5 2021 6:44 AM
Questions: I misplaced the nut for the threaded shaft. Is there any way I could purchase another through website without buying an entire assembly?
Question By: Job on Jan 12 2021 7:22 PM
We should have spare parts for it. Please email mike@Kaiserwillys.com But you local hardware store will also have.
Answer By: Willys Jeep Parts Tech on Jan 12 2021 11:35 AM
Questions: Will the windshield be able to fold down still with these installed? if not do you have any that don't protrude out as much so the windshield will still go down?
Question By: Ryan Ballentine on Oct 11 2020 4:23 AM
Yes, the shaft is cut to length or the motor spaced away so you will still be able to fold it down.
Answer By: Willys Jeep Parts Tech on Oct 12 2020 5:32 AM
Questions: What is the wiring configuration for the motor? I see two screws...is the hot and ground hardwired...what screw is the hot?
Question By: terry kelly on Aug 6 2020 9:49 PM
See the link in the item description. There are wiring instructions. Thanks!
Answer By: Willys Jeep Parts Tech on Aug 7 2020 5:41 AM
Questions: Would this fit my 1971 CJ5 driver side under the windshield mounted?
Question By: Daniel Gomez on Jul 28 2020 5:52 PM
This is for top mounted wiper on the CJ-5.
Answer By: Willys Jeep Parts Tech on Jul 28 2020 10:57 AM
Questions: What i the degree of sweep or swing?
Question By: steve on Apr 2 2020 1:37 AM
Approx 90 degrees.
Answer By: Willys Jeep Parts Tech on Apr 2 2020 6:01 AM
Questions: Will these motors work on my 1951 M38 with the 24 volt system? Thanks
Question By: Mark Guerry on Mar 29 2020 12:34 AM
No, you'll want to use the 24V kits: https://www.kaiserwillys.com/windshield-wiper-motor-conversion-kit-in-24-volt-fits-50-68-m38-m38a1 Thanks
Answer By: Willys Jeep Parts Tech on Mar 30 2020 4:03 AM
Questions: Do these have a switch on the back of the motor like the vaccum motors do or do you have to use the toggle?
Question By: Bw on Mar 26 2020 10:03 AM
These is a switch on the back of the motor.
Answer By: Willys Jeep Parts Tech on Mar 26 2020 5:47 AM
Questions: Windshield hole diameter. Outer shaft is .34 and inner .23. Is this inches or millimeters.
Question By: Gerry on Aug 6 2019 10:22 PM
That is in inches
Answer By: Willys Jeep Parts Tech on Aug 7 2019 6:37 AM
Questions: What is the diameter of the shaft that goes through the windshield frame? I want to mount below the glass and will need to drill holes in my 53 CJ3B windshield frame. What size hole will I need?
Question By: Gerry on Jul 19 2019 1:38 AM
Outer shaft .34 Inner is .23
Answer By: Willys Jeep Parts Tech on Jul 19 2019 6:31 AM
Questions: Hello, Since the on off switch is on the motor at the top of the windshield itself what is the silver toggle switch for? Thanks!
Question By: Matt Sullivan on May 27 2019 1:29 AM
You can optionally wire this in. But typically you wire thru the motor itself to turn on and off.
Answer By: Willys Jeep Parts Tech on May 28 2019 5:40 AM
Questions: Is there a way to synchronize 2 of these motors or at least get them close to being in sync operating off of one switch?
Question By: Jason on Nov 5 2018 12:20 AM
Sorry, they are wired independent.
Answer By: Willys Jeep Parts Tech on Nov 5 2018 11:49 AM
Questions: Dear Sir/Madame; Does this part fit to Willys 1964 Truck? Thanks.
Question By: Mehmet GÜVEN on Oct 25 2018 8:03 AM
957958 is the part number you need for the Willys Truck.
Answer By: Willys Jeep Parts Tech on Oct 25 2018 5:39 AM
Questions: will this part fit on a top mount windshield frame for a 1969 jeep willys cj-3B
Question By: siddharth lakhanpal on Aug 24 2018 8:17 AM
They didnt make CJ-3B in 1969. But yes, it does function for top mounted wipers. Please email firstname.lastname@example.org some pictures of your Willys and we can ID it for you. Thanks!
Answer By: Willys Jeep Parts Tech on Aug 24 2018 5:35 AM
Questions: Is there a way to change the “park” position to be on the Left instead of the Right so that the driver side wiper is not blocking the view of the road?
Question By: Gilles Rioux on Jul 10 2018 3:17 PM
Sorry, I dont believe so.
Answer By: Willys Jeep Parts Tech on Jul 10 2018 12:03 PM
Questions: do you have a kit for the station wagon?
Question By: zack ceron on Feb 12 2018 4:57 AM
957958 is the part number for the Willys Truck and Willys Station Wagon.
Answer By: Willys Jeep Parts Tech on Feb 12 2018 6:13 AM
Questions: What is the dimension of the motor it self from the mounting surface to the back of the housing (where the handle is)?
Question By: Craig on Aug 17 2017 12:05 AM
3.5" is the depth of the housing.
Answer By: Willys Jeep Parts Tech on Aug 17 2017 11:13 AM
Questions: Do you sell JUST the motor seen in this picture by itself? As shown in the picture, this motor has the switch on the back of the motor and that is all I need is 2 of them. I have everything else already new. Thanks
Question By: Dan Vest on May 1 2017 12:43 AM
They only come in as a kit.
Answer By: Willys Jeep Parts Tech on May 1 2017 5:49 AM
Questions: We're the original wiper motors mounted top or bottom of windshield on a CJ2A
Question By: Elvis Hood on Jan 31 2017 1:10 PM
They were above the glass on a CJ2A.
Answer By: Willys Jeep Parts Tech on Jan 31 2017 5:33 AM
Not allways. Wipers are at the bottom on the Nordic houses
Answer By: Páll on Mar 13 2017 3:37 PM
Questions: How many degrees does the wiper arm swing? My original vacuum swung about 120 or more. Electric replacement purchased years ago only has swing of about 90.
Question By: john bowling on Jan 13 2017 1:17 AM
These swing approx. 90 degrees.
Answer By: Willys Jeep Parts Tech on Jan 13 2017 5:43 AM
Questions: hi i have a jeep kaiser from 1966 with hydraulic ? system can i replace with this KIT ? thanks
Question By: Eric ( french) on Dec 7 2016 4:20 PM
Not sure I understand all of what you are referring to. Please call us toll free. We are happy to help out.
Answer By: Willys Jeep Parts Tech on Dec 7 2016 10:21 AM
Questions: Is this the correct item for my 1965 CJ5? Will this replace both the drivers and passenger side existing?
Question By: Donna on Aug 30 2016 4:09 PM
Yes, this is proper for your CJ-5.
Answer By: Willys Jeep Parts Tech on Aug 30 2016 10:22 AM
Questions: I have a 51 CJ3A and want to mount it on the top of the windshield, how long is the shaft that comes out of the motor Thank You
Question By: Carl Lefler on Aug 23 2016 5:14 PM
3" long shaft. These fit a number of Willys Jeeps. You have to space the motor out away from the windshield frame or some people will simply use a pipe cutter to reduce length of inner and outer shaft. I recommend using a simple tube spacer.
Answer By: Willys Jeep Parts Tech on Aug 23 2016 12:08 PM
Questions: Is the wiper blade for this kit readily available, or can we "only" order replacements from you? (In which case I'd order an extra)
Question By: Ray Fichthorn- Ray-Lin Restoration on Aug 3 2016 3:47 PM
We do keep the blades in stock. I'm not sure if you could find them locally or not though. Thanks
Answer By: Willys Jeep Parts Tech on Aug 4 2016 6:24 AM
Questions: i have a 42 mb with the manual wipers. will this kit work? the shaft looks a bit too long. thanks
Question By: jerryI have a 42 mb on Aug 28 2013 12:00 AM
Yes. You will just need to space the motor out from the frame or cut the shaft size down.
Answer By: Willys Tech on Aug 28 2013 12:00 AM
Questions: I need a wiper motor (electric) for the driver's side of a 1963 CJ5. Wasn't sure if there was a difference between driver and passenger side wiper motors. Please advise the correct part number. I am assuming 12V but I don't know for sure what is on there. Thank you!
Question By: George on Mar 29 2013 12:00 AM
They are the same for both sides. You can order qty 2 of these and be all set.
Answer By: Willys Tech on Mar 29 2013 12:00 AM
Questions: looks as if the motor shaft would require a spacer to use on the split window frame of CJ2A? does the kit come w/spacer? or what does one use for a spacer? thanks.
Question By: Anonymous on Feb 26 2013 12:00 AM
They originally used a spacer there. If you dont have them you can make them or some people just cut the shaft size down.
Answer By: Willys Tech on Feb 27 2013 12:00 AM
Questions: I have a 1949 Willy's CJ3a and it is pretty much all original except for a 12V alternator. My question has to do with the 12V alternator if I have to change all my electrical items such as gauges an lights an fuses an so forth?
Question By: Leroy Koral on Dec 18 2012 12:00 AM
Your fuel gauge is the one that will have to be changed. We have them as well. The alternator comes with a new amm gauge with it.
Answer By: Willys Tech on Dec 19 2012 12:00 AM
Questions: will this part fit on a top mount windshield frame for a 1963 jeep willys cj5
Question By: Anonymous on Apr 24 2012 12:00 AM
Yes this is the proper one for the top mounted wipers on a CJ-5
Answer By: Willys Tech on Apr 25 2012 12:00 AM
Questions: Are the switches for the motors located on them?
Question By: Matt on May 25 2011 12:00 AM
Yes the switch is on the front of the motor. No drilling required.
Answer By: Willys Tech on May 26 2011 12:00 AM
Questions: is this s short shaft model? ordered one and seems to be about 1 inch longer than previous version from about 20 years ago
Question By: Anonymous on Dec 23 2010 12:00 AM
You have to use your original spacers or just shim it. Please call me toll free. I can help out on this.
Answer By: Willys Tech on Dec 24 2010 12:00 AM