Fuel Tank Pick Up Unit
Fits 50-52 M38
New Fuel Tank Pick Up Unit
Mounts in the large hole on top of your military tank for the fuel pick-up. Comes complete with filter insert. Made in the USA.
Fits:
50-52 M38
Part # | Price |
---|---|
M38FUELPICKUP | $199.99 MSRP: |
$199.99
MSRP:
Product Videos
Questions & Answers
Do you sell the gaskets for this part and part 800201 separately?
Yes we do. The gasket for the pick up is 7351315 and the gasket for the sending unit is 648927
What is the thread size for the fitting used on the fuel pickup?
It is 1/4 "
Does this unit come with a Gasket?
Separate item. See part number: 7351315
Where does the vent line from the fuel pickup on an M38 go?
Email mike@kaiserwillys.com and we can send you a diagram. It routes all the way back to the engine compartment.
I have your fuel pickup M38fuelpickup. I need to know what size the fitting is for the vent line. The original manual specs 1/8 pipe thread but a 1/8 NPT does not fit, it is to large to even start. I have also tried the nearest metric size with no luck. Thanks!
3/16 inverted flare is what was used.
Your photos of the M38 pick up show two different filter types. Which one will I get if I order? It looks like they must work differently.
The photos are correct now. It comes with the cartridge. Thanks
Do you carry a replacement vent line that connects to the pick up?
That long vent line has to be made locally.
what gasget material will i need?
7351315 This is what you need.
Will Fuel pickup unit M38FuelPickup work with 12v conversion? Or do I need a different 12v pickup unit?
These work off of suction/gravity and voltage doesn't effect it.
Can I get just the filter/pickup portion? If so, what part number is it?
Yes but please call us toll free. We should have them by themselves.
Does this include the gasket?
You have to make the gasket.
YOU MIGHT ALSO BE INTERESTED IN

168 Tooth Flexplate
Fits 76-86 CJ with GM V8 Conversion for Automatic Transmission
Part # 340296
$35.99
MSRP:

"Carburetors (Carter)" Ordnance Maintenance Owners Manual
Fits 41-52 Jeep & Willys
Part # MANUAL-181
$22.50
MSRP:

"Willys" Frame Data Plate (rectangular style)
Fits 41-71 MB, CJ-3A, 3B, 5, 6
Part # DATAPLATE-15
$14.99
MSRP:

1 Piece Narrow Track Passenger Side Axle
Fits 76-83 CJ with Rear AMC20
Part # 8127071PK
$169.99
MSRP:

1 Piece Quadratrac Passenger Side Axle Kit
Fits 76-79 CJ with Rear AMC20
Part # 8127081PK
$199.99
MSRP:

12 Volt to 6 Volt Heater or Defroster Motor Voltage Reducer
Fits 41-71 Jeep & Willys
Part # HR02
$58.99
MSRP:

12 Volt to 6 Volt Oil, Gas or Temp Gauge Voltage Reducer
Fits 41-71 Jeep & Willys
Part # V12872
$20.99
MSRP:

168 Tooth Flexplate
Fits 76-86 CJ with GM V8 Conversion for Automatic Transmission
Part # 340296
$35.99
MSRP:

"Carburetors (Carter)" Ordnance Maintenance Owners Manual
Fits 41-52 Jeep & Willys
Part # MANUAL-181
$22.50
MSRP:

"Willys" Frame Data Plate (rectangular style)
Fits 41-71 MB, CJ-3A, 3B, 5, 6
Part # DATAPLATE-15
$14.99
MSRP:

1 Piece Narrow Track Passenger Side Axle
Fits 76-83 CJ with Rear AMC20
Part # 8127071PK
$169.99
MSRP:

1 Piece Quadratrac Passenger Side Axle Kit
Fits 76-79 CJ with Rear AMC20
Part # 8127081PK
$199.99
MSRP:

12 Volt to 6 Volt Heater or Defroster Motor Voltage Reducer
Fits 41-71 Jeep & Willys
Part # HR02
$58.99
MSRP:

12 Volt to 6 Volt Oil, Gas or Temp Gauge Voltage Reducer
Fits 41-71 Jeep & Willys
Part # V12872
$20.99
MSRP:

168 Tooth Flexplate
Fits 76-86 CJ with GM V8 Conversion for Automatic Transmission
Part # 340296
$35.99
MSRP: