Questions & Answers
Questions: I have a 1949 Wyllis jeep. What is the best way to remove a stud that is ready stuck. I already tried 2lb hammer and various other force methods..
Question By: Guy on May 26 2021 12:40 PM
Never use a hammer. Always a hydraulic press with plenty of backing. Thanks!
Answer By: Willys Jeep Parts Tech on May 26 2021 6:30 AM
Questions: Do these need to be swedged after being pressed in?
Question By: Chase on Aug 29 2019 3:31 AM
It is recommended for safety.
Answer By: Willys Jeep Parts Tech on Aug 29 2019 6:03 AM
Questions: What is the overall length of these wheel studs? Thank you!
Question By: Matt on Mar 11 2019 4:51 PM
Answer By: Willys Jeep Parts Tech on Mar 11 2019 10:41 AM
Questions: What size nerl on part A473 lug bolt for 41-71 Jeep-Willy’s. Need a .621 to .625
Question By: Larry Allen on Feb 28 2019 10:32 PM
Answer By: Willys Jeep Parts Tech on Mar 1 2019 10:06 AM
Questions: Was wondering what the size of the knurl is?
Question By: Robert on May 1 2017 9:27 PM
Approx 1/2" in length.
Answer By: Willys Jeep Parts Tech on May 2 2017 6:15 AM
Questions: Why did they use left hand thread on the left side of the vehicle in the early years and is it OK to use right hand threads on the left side if all are the same? I assume it was because of the rotation of the wheels but it seems like all newer models use right hand thread on both left and right side wheel hubs.
Question By: Anonymous on Sep 16 2011 12:00 AM
Im really not sure why they used to do it. You can switch over to all right hand thread no problem.
Answer By: Willys Tech on Sep 16 2011 12:00 AM
They thought because of the rotation, the lug nuts could loosen off so they reversed the threads in the opposite direction.
Answer By: Tim on Feb 24 2018 7:16 PM
Questions: I am purchasing new hubs so I wanted to know....Are these the same studs that you would need for the hubs, in other words, are these the wheel studs?
Question By: Bill on Mar 7 2011 12:00 AM
Yes, these are the studs for the hubs and drums that your lug nuts go onto.
Answer By: Willys Tech on Mar 7 2011 12:00 AM