Questions & Answers
Questions: Which grade of trans/transf case gear lube is best for a 42 GPW? Should I use a GL-4 or a GL-5 80/90 lube. the former owner used GL-5 80/90 thanks.......
Question By: Phil Lauricella on Jun 3 2018 10:16 PM
We use a straight GL-4 non synthetic. They are good for yellow metals.
Answer By: Willys Jeep Parts Tech on Jun 4 2018 5:57 AM
Questions: I have a restored 42 Willys MB. Transmission was making noise in 2nd gear. A mechanic sent the transmission to transmission shop and they said they had to build up the main shaft and turn it down. Now it makes severe noise in 3rd gear at all speeds. I complained and they sent the transmission back and said it was normal. I have owned several Willys Jeeps, this does not seem right. I have been out some serious money allready. What do you guys suggest. Thank you, Ralph Todd
Question By: Ralph Todd on Mar 14 2018 12:46 AM
Doesnt sound right to me. Some gear chatter is normal in the transmission and transfer case but from what you write that sounds excessive. Call me toll free. Ask for Mike M. I can try to help out.
Answer By: Willys Jeep Parts Tech on Mar 14 2018 6:27 AM
Questions: Do you have the GPW t84 case as well or are they all MB.
Question By: Richard Lanoix on Feb 15 2017 6:45 PM
We may be able to source one for you. Please call us toll free.
Answer By: Willys Jeep Parts Tech on Feb 15 2017 11:10 AM
Questions: Does the t-84 and t-90 use the same transfer case ? I just bought an mb frame and motor i put a t-90 trans to the back and its 1 1/2 inches to long if i get a t-84 trans will it work with the transfer case i have ?
Question By: Bill on Sep 21 2014 12:00 AM
No, the transfercase between the two are different. T-84 used a 3/4 intermediate shaft and the T90 used either a 1-l/8 or 1-1/4 intermediate shaft all with different gears from one another. This link will help: http://www.kaiserwillys.com/category/willys-jeep-transfercase-diagrams
Answer By: Willys Tech on Jan 1 1970 12:00 AM
Questions: I have a 45 gpw that has a t90 swap. I am doing a frame off restoration And would like to go back to a t84 so I don't have to cut the floor. What are the dimensions of the t84 vs t90?
Question By: Travis on Jun 28 2014 12:00 AM
The T84 sits lower than the T90 because of the top shifter. I imagine that someone had to cut your floor board to make the T90 work in your jeep.
Answer By: Willys Tech on Jun 30 2014 12:00 AM
Questions: On my t-84 transmission, it won't shift into first gear while vehicle is in motion. Is this normal or do I have a problem?
Question By: Steve on Nov 4 2013 12:00 AM
You shouldnt be able to. It is not sycronized.
Answer By: Willys Tech on Nov 4 2013 12:00 AM
Questions: I'm weighing in the option of picking it up or shipping it overseas. What is the weight and dimension of the package to be shipped; and will be packed into a wooden crate?
Question By: Alex on Aug 14 2013 12:00 AM
These come in a heavy duty double walled box with packaging. The box is approx 18x12x12 and weights 50 pounds.
Answer By: Willys Tech on Aug 14 2013 12:00 AM