Save 10% Off Overhaul Kits. Enter HAUL10 at checkout. Exclusions apply

FREE SHIPPING – orders $98+ See Details

Select Your Currency
Close
  • Africa
  • Americas
  • Asia
  • Europe
  • Oceania
Shop Kaiser Willys

Compete Speedometer Cluster with Gauges 0-90 MPH
Fits 55-71 CJ-3B, 5

Part # 914845

New Complete Speedometer Cluster.

Highest quality reproduction available. Works for 12 volt systems and mounts just like original. Comes complete with built in fuel and temperature gauges as well as new odometer gauge. Includes turn signal, oil, and amp indicator cut outs. Reads 0-90 MPh.

Fits:
53-64 CJ-3B
55-71 CJ-5

Helpful Guides and Illustrations:
Speedometer Cluster Installation Instructions

 

Part # Price
914845

$125.99

MSRP:

$125.99

MSRP:

Call for Details

Product Videos

Questions & Answers

Please Wait...

Ask Question Add Answer

All questions will be displayed after moderation. All answers will be displayed after moderation.

Is there a fuel gauge replacement for this speedometer?

Willys Jeep Parts Tech:
8126919 is what you are referring to.

will this work in a 1976 cj5 base model?

Willys Jeep Parts Tech:
Yes, that is correct.

I have an original speedometer for a 58 CJ3B that is registered in mph up to 90. (The larger 5" version). I'd like to keep this gauge for the vintage look, if it all possible but have a few questions to be answered. First, my understanding is the fuel and temp gauges are originally 6 volt, so they will not work if I transfer to a 12 volt system. If this is true, how might I go about replacing the fuel and temp gauges that reside inside the speedometer housing to account for this? After taking it apart, can the fuel and temp gauges from inside the speedometer and the bulbs be replaced to keep the same original look but with 12v adaptation? Also, on the speedometer needle itself; mine seems to be missing a piece and is not turning when the mechanism is turning in the back. It is disconnected on near the spring side and I cant seem to find and diagrams or reference material on the unit. I have it taken apart on the bench and looking for options. Does anybody carry parts or overhaul these original speedometers? They have a great look to them that I'd like to keep with the jeep if at all possible. Thanks! -Luke

Willys Jeep Parts Tech:
914845 is for 12 volt systems. Email mike@Kaiserwillys.com and we can recommend a gauge rebuilder if you like, it can be a bit expensive though to restore one.

Does this speedometer work on a 6 volt system?

Willys Jeep Parts Tech:
This is for 12 volt gauges.

What size is this guage and will I have to drill or cut a hole to make it fit.

Willys Jeep Parts Tech:
5.5" like original. They are same size as the originals.

I have a 62 CJ3B. What temperature sending unit and oil switch works with 914845 speedometer cluster. Temp units listed have two different styles of speedometer clusters that are specific to sending unit. Thanks

Willys Jeep Parts Tech:
914847 for temp sender, 938092 for oil.

Is it possible to roll this speedometer forward so it reads the mileage on the original speedo? I know tat theoretically drops the value, but my mileage is already low and I am not worried about it.

Willys Jeep Parts Tech:
Not sure if you could do it from inside the unit, but the alternative method would be to hook up the speedometer cable and then use a drill on the other end and go until you get to that mileage.

Will this work in a 1958 jeep fc170 with a 22 gallon tank

Willys Jeep Parts Tech:
Yes, as long as you have the 5.5" opening and are 12volt.

Is there a beauty ring or gasket that hides the screw flange, or are the screws exposed?

Willys Jeep Parts Tech:
There are studs on the backside of your dash. They dont show. It mounts from the backside.

Do you have a rev counter the same diameter please

Willys Jeep Parts Tech:
Sorry, they never originally used one.

i have a 62 cj5 put my new speedometer in and the fuel gage shots up to full. sender worked before .am i missing something thanks Bill

Willys Jeep Parts Tech:
I would check your ground wires and test your sending unit with a OHM's reader.

Can the odometer be reset to shpw accurate mileage?

Willys Jeep Parts Tech:
Some people use a drill motor but depending on mileage this may not be practical.

Did you have the socket for the light to the speedometr

Willys Jeep Parts Tech:
A6225 and A2506

If i purchase a new Tub do I cut a 5.5 inch hole?

Willys Jeep Parts Tech:
Yes, but it is always best to wait to have the gauge before you cut a hole.

Another site list the 914845 with **NEW STEPPER MOTOR DESIGN**. Is yours the same?

Willys Jeep Parts Tech:
There is only one manufacture on these that makes it currently and i dont know what they mean by that.

My speedometer cluster just ate itself sounded like screaming eagles inside the poor thing. Wondering how well these are made and if you hear of any issues with them? I have a new speedometer cable and looking for some feedback on this instrument before I purchase one 1958 CJ5 Thanks Jim

Willys Jeep Parts Tech:
We dont have any issues with ours. Please email mike@kaiserwillys.com to help.

Will this be compatible whit my Dj3a T96 transmission?

Willys Jeep Parts Tech:
Please email mike@kaiserwillys.com a picture of your current speedometer and we can help out.

Will this work for a 1974 CJ5?

Willys Jeep Parts Tech:
Yes, that is correct.

Does this require a seperate voltage regulator for the fuel and temp gauge or do you just plug the 12 volt wire straight on?

Willys Tech:
No, it wires straight up.

I have a 1957 FC-150 in 12 volt. I also have an aftermarket fuel tank in the bed. I want to add a sending unit to this tank. Do you know what the ohms range is for the fuel gage in this speedo cluster? I want to get a sender that matches up.

Willys Jeep Parts Tech:
8-1/2 - 10-1/2" FULL 70-80 EMPTY

Will this work for my 57 FC 150?

Willys Jeep Parts Tech:
Yes, as long as you have the same style 5.5" diameter speedometer cluster.

When will the 2019 calendar be on sale?

Willys Jeep Parts Tech:
They are due in about 2 weeks finally.

What is the diameter of the speedometer cluster. I want to make sure it will fit in to replace the one I have now. Also should I order a cable or any other parts to go with this. I have a 1970 CJ-5 Thank you

Willys Jeep Parts Tech:
5.5" in diameter

Hi I just installed this gauge in my 68 CJ 5 with the v6. Everything works, but the speedometer is off by quite a bit. It doesn't move up from zero until my GPS says I'm going 20mph. When it says I'm going 10 mph I'm actually going about 30 mph. Does it require a different gear in transfer case? It worked fine with the old speedo before the gauge died? Did I not install it properly? Thanks!

Willys Jeep Parts Tech:
Please email mike@kaiserwillys.com. Do you have the original size tires and rims on there?

(914845) Does this unit have the built in voltage regulator, or are the gauges 12V connecting directly to the sender?

Willys Jeep Parts Tech:
This is a resistance reader only. You wire direct to gauge.

Is the face of it glass or plastic?

Willys Jeep Parts Tech:
Glass

hi its posible to get one for 6 volts???

Willys Jeep Parts Tech:
This speedometer is only available in 12 Volts but we may have some other options for you. Give us a call toll free and we can go over it - 888.648.4923. Thanks

Is this Speedo back lite? Does it come with all needed indicator bulbs?

Willys Jeep Parts Tech:
If you're looking for the complete kit with bulbs and sockets, try part #999845. Thanks

does this fit a 75 cj5? and have some of the issues that are others are having been resolved?

Willys Jeep Parts Tech:
If you have a 5.5" hole it will.

I bought this gauge set about a year and a half ago. Just recently installed it. Temp always reads hot when warmed up. I am using an Echlin TS6464. sender. Starts out cold then as engine gets to temp it always reads hot. Old gauge always read about mid-way on gauge when at temp.

Willys Jeep Parts Tech:
Please call us toll free and we can try to help you out. This time of year you could just be running hot too.

my 59 cj5 does not have turn signal in the gauge. I notice one does is there one without? or doe I have to buy 2 light sockets as well ad do some rewiring?

Willys Jeep Parts Tech:
The only way they make the gauges now is with the green indicator in the face of it.

hi, i have a CJ5. does the speedometer includes the cables needed to work ?

Willys Jeep parts tech:
643797 is the number for the speedometer cable. It is a separate item.

What is the difference between the CJ speedo's and the trucks?

Willys Tech:
There is no difference. They are the same.

Will this work for a DJ3a ?

Willys Tech:
As long as you have this style cluster in your dash then yes it wil.

i have already ordered this cluster but need to order the temp sending unit that screws into the engine block. in the catalog it shows two saying one is for king sealy and one is for warner. which one do i order to go with this cluster? thanks you guys are great!

Willys Tech:
914847 is the one you want

In your discrption it says ( oil & amp. Cutouts) does this mean that I use existing wire and lights ? I have 1967. cj 6a

Willys Tech:
This is a complete cluster with gauges. You just hook up your wires and lights from your harness and you are off and running.

Does this come with a wiring diagram?

Willys Tech:
Yes it does.

I need a speedometer for my 1963 CJ3B. This looks like it but it's says it fits a 55-71 CJ-5. The one that is pictured for mine doesn't look like the one I have. Smaller with no gauges.

Willys Tech:
Later CJ-3B did use this style speedometer. So this will be the correct.

I recently purchased a replacement cluster from another company (my mistake) and neither the fuel nor temp gauges will work with the factory sending unit or the new sending unit I purchased from you guys. Will this cluster work in my 62 CJ5 and be compatible with the original fuel sending unit and temp sensor?

Willys Tech:
Yes this cluster works with the factory gauges. They are mated to one another.

What is the difference between 914845 and 914845A? Looking for 5.5 set for CJ3B.

Willys Tech:
They are the same just an interchange number.

my 60 cj5 has the original stewart warner speedo it looks why differnt then this one this one looks like one for 1970s era jeep do have the original stye stewart warner with single numbers thanks

Willys Tech:
The single digit speedo's are not available anymore. This is the replacement.

Will this speedo work on my 62 FC170 ?

Willys Tech:
Yes it should work just fine.

Can I use this gauge in a '61 CJ3B?

Willys Tech:
Yes it should work fine.

I have a 6 volt system in a 54 DJ and I need the speedometer and guages for 6 volts. What do I need to make it work?

Willys Tech:
Please call us toll free. We have a few options.
Request Catalog
X
THANK YOU! Your catalog request has been submitted successfully. Please note:

If your catalog does not arrive within 7-10 business days, call us Toll-Free at (888) 648-4923.

Email Subscription
X
THANK YOU! You have successfully subscribed to our newsletter.
Contact Form
X
THANK YOU! Your contact form request has been submitted successfully.
Photo Contest
X
SUCCESS! Your photo contest entry has been submitted!
Browser warning
The browser you are using to visit our website is no longer supported. For the best browsing experience, please visit us using a different browser.
I understand, close this message