Save 10% Off All Suspension Parts. Enter SPRING10.

FREE SHIPPING – orders $98+ See Details

Select Your Currency
Close
  • Africa
  • Americas
  • Asia
  • Europe
  • Oceania
Shop Kaiser Willys

Front & Rear Axle Wheel Hub
Fits 41-64 Jeep & Willys with Dana 25 front & Dana 27 rear

Part # 649938

New Replacement Front Axle Wheel Hub

Replace your over bent, cracked hubs with new direct replacement ones.

Application:
Dana 25 front
Dana 27 rear

Fits:
41-45 MB (fits both front and rear)
41-45 GPW (fits both front and rear)
46-49 CJ-2A
49-53 CJ-3A
53-64 CJ-3B
55-68 CJ-5
50-52 M38
52-64 M38A1
46-64 Truck
46-64 Station Wagon

Part # Price
649938

$74.99

MSRP:

$74.99

MSRP:

Call for Details

Product Videos

Questions & Answers

Please Wait...

Ask Question Add Answer

All questions will be displayed after moderation. All answers will be displayed after moderation.

will this work with 6 bolt lockout hubs?

Willys Jeep Parts Tech:
Yes, that is correct.

my 63 cj5 has two different hubs on the front. one looks like this one, the other has 3 screws holding the drum to the hub. I bought a rebuild kit that says it is for this year cj5 and it came with the drums with the 3 extra holes for the screws. if new studs are pressed in can I use these drums or do I need to buy different hubs with the screw provision? the bearings seem to be the same, all 4 of them LM501310

Willys Jeep Parts Tech:
Give us a call toll free. Happy to help you out on this.

Is this for all 4 wheels front and rear or do I have to buy all 4 individually

Willys Jeep Parts Tech:
Depends on your vehicle. If you have an MB/GPW its front and rear. See the fits under the item description. Other Willys take 811351 or 912647 for the rear depending what they have.

I am finding out that some early hubs require a different OD race. From what i am reading the earlier ones were bigger but later ones were smaller while keeping the ID for the same bearings and spindle. Which ones are these?

Willys Jeep Parts Tech:
The later Willys 1960's and up with the Dana 27 front end had LM stamped bearings that had a larger OD. Please email mike@kaiserwillys.com your vehicle information and we can help. Thanks!

Hi, Hope you all are well. I pulled the brakes off of my 56 3b. The driver side had the drum on the outside of the hub over the studs. The passenger side had the drum on the inside of the hub captured by the studs. What's the difference. I want to put it back together the same on both sides and want to order parts. thanks, Mike

Willys Jeep Parts Tech:
Sounds like someone put early v. late style drums on your jeep. 808770 is what you typically see on a CJ-3B with the hub mounted on the inside. Email mike@kaiserwillys.com and we can see what all you have going on.

Hi Gang, hope you all are doing well. My question is weather or not my 48 2a is supposed to have the wheel hub outside like it is or inside like the parts diagram?

Willys Jeep Parts Tech:
The hub mounts on the outside of the drums on your vehicle.

I have a 1959 Willy's pick up with the number 25 stamped in the front axle case. My hub looks like the picture for the Dana 27 front axle hub. Which one do I buy?

Willys Jeep Parts Tech:
In 1959 you would have the Dana 25 front end. Double check your wheel bearings. Email mike@kaiserwillys.com your numbers and I can ID. Either way this hub is correct for both.

Where can I find the gaskets for this hub?

Willys Jeep Parts Tech:
649784 is the part number

The wheel hubs come with a waxy coating on them. What is this, and does it need to be removed? I'm also having issues getting my new lug bolts to pull through the hub after easily pulling them through the drum. Any tips?

Willys Jeep Parts Tech:
That is a rust preventative coating. Remove it when painting. You need to use a hydraulic press to remove and install the lug bolts.

Can you draw the hub and brake drum together with the lug nuts or is it a press fit? Thanks!

Willys Jeep Parts Tech:
You need to use a hydraulic press and give it plenty of backing.

I have a 1948 Jeepster and I broke off all 5 lug bolts, not realizing it is a left hand turn. Do I have to buy the whole piece, or is there a way to take off the old bolts? I tried popping them out with a hammer but that wasn't working.

Willys Jeep Parts Tech:
If you studs broke you will need to drive them out with a hydraulic press. I would never beat on your hub, it can bend it.

I need a new front hub. Are the races already pressed into the hub, or do those need to be order in addition? If I need to also order races, what is the part number?

Willys Tech:
The races are separate. The bearing for this front hub are part numbers: 52943 & 52942
Request Catalog
X
THANK YOU! Your catalog request has been submitted successfully. Please note:

If your catalog does not arrive within 7-10 business days, call us Toll-Free at (888) 648-4923.

Email Subscription
X
THANK YOU! You have successfully subscribed to our newsletter.
Contact Form
X
THANK YOU! Your contact form request has been submitted successfully.
Photo Contest
X
SUCCESS! Your photo contest entry has been submitted!
Browser warning
The browser you are using to visit our website is no longer supported. For the best browsing experience, please visit us using a different browser.
I understand, close this message