Questions & Answers
Hi Mike. I have a M38. I need a horn repair kit. All i have is a bottom gear box horn button switch and a horn. nothing else from the top down. which rod do i need "RODKIT" or "806915" or both? and do i need the spring "639191" and the button " 801422" or anything else to make it complete. Thanks! PS: My military jeep data plate shows M38A1 2/53 But the model is M38 flat fender which should i go by?
Willys Jeep Parts Tech:
Please email mike@kaiserwillys.com and we can send you a diagram of your setup.
Please email mike@kaiserwillys.com and we can send you a diagram of your setup.
I pulled out the horn rod on my 51 M38 steering column but it won't go back in? Is there a trick to getting it to slide back in place? Without removing the entire steering shaft and box?
Willys Jeep Parts Tech:
https://www.kaiserwillys.com/diagram/m38-diagrams/steering-diagrams-willys-m38/steering-gear-box-50-52-m38/steering-gear-box See link. You have to get it to go down into #20
https://www.kaiserwillys.com/diagram/m38-diagrams/steering-diagrams-willys-m38/steering-gear-box-50-52-m38/steering-gear-box See link. You have to get it to go down into #20
What items are included in this kit?
Willys Jeep Parts Tech:
The rod and the nut are included as shown. These are NOS originals.
The rod and the nut are included as shown. These are NOS originals.
Where can I find instructions on removing/installing a 1952 M38A! horn switch/rod/etc.?
Frank:
But to put it back in, you have to go under the jeep and remove the horn switch to put it back in, you can not put it in from the top.
But to put it back in, you have to go under the jeep and remove the horn switch to put it back in, you can not put it in from the top.
Willys Tech:
It basically just slides out once you remove the nut.
It basically just slides out once you remove the nut.
